White Knight WKCD40 Bedienungsanleitung

White Knight Ventilator WKCD40

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für White Knight WKCD40 (5 Seiten) in der Kategorie Ventilator. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/5
WKCD40 ELECTRIC FAN
IMPORTANT INSTRUCTIONS
1. Read all instructions carefully before you use the appliance.
2. Remove the packaging and ensure that the appliance is undamaged. In case
of doubt do not use the fan and contact your supplier.
3. Do not let children play with parts of the packaging (such as plastic bags).
4. Before plugging the fan into the socket, check that the voltage of your mains
supply matches the voltage marked on the rating label of the appliance.
5. Before assembling or dismantling the fan, ensure that the fan is unplugged.
6. Before unplugging the supply cord, turn off the switch at the socket outlet.
7. Do not insert any object into the guard while the fan is operating.
WARNING: RISK OF INJURY.
8. The fan is meant for use in temperate climates. Do not use the fan in high
humidity or a dusty area.
9. Do not hang any clothes on the fan guards.
10. Do not use the fan outdoors.
INSTRUCTION MANUAL
Description of Parts
Caution
This appliance is for household use only. Any servicing other than cleaning
and user maintenance should be performed by an authorised service
representative. Do not immerse the unit in water. To reduce the risk of fire or
electric shock, do not remove the housing. The fan has no user serviceable parts
inside. Only authorised service personnel should handle repair work.
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid a hazard.
Assembly of the base
1. Remove the base mounting nut from the stand
by turning it anti-clockwise.
2. Feed the supply cord through the opening in
the base.
3. Insert the stand into the base and tighten the
base mounting nut clockwise
4. Lead the supply cord through the recess at
the side of the base.
Assembly of the fan
1. Remove the blade cap from the motor shaft and remove the guard lock nut
from the motor body.
2. Fit the rear guard to the motor body, by positioning on the location pins.
Secure the guard to the motor body with the guard lock nut.
3. Push the fan blade onto the motor shaft by matching the slots on the base of
the fan blade with the shaft pin. Secure the blade with the blade cap, turning
it in an anti-clockwise direction. Check that the fan blade rotates freely by
turning it with your hand.
4. Open the securing clip at the bottom of the front guard and loosen the clip
screw. Position the top clip on the uppermost part of the rear guard. Push
the top clip down and press rim of the front guard onto the rear guard.
Close the bottom clip and tighten the screw.
Operations
1. 3-Step Speed Control
OFF 0
LOW 1
MEDIUM 2
HIGH 3

Produktspezifikationen

Marke: White Knight
Kategorie: Ventilator
Modell: WKCD40

Brauchst du Hilfe?

Wenn Sie Hilfe mit White Knight WKCD40 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ventilator White Knight

White Knight

White Knight WKCD40 Bedienungsanleitung

24 Juli 2024

Bedienungsanleitung Ventilator

Neueste Bedienungsanleitung für -Kategorien-

Duux

Duux DXFH02 Bedienungsanleitung

16 Oktober 2024
Duux

Duux DXCF12 Whisper Flex Bedienungsanleitung

16 Oktober 2024
Orbegozo

Orbegozo PW 1321 Bedienungsanleitung

11 Oktober 2024
Air King

Air King E130SH Bedienungsanleitung

10 Oktober 2024
Honeywell

Honeywell HT-900E Bedienungsanleitung

9 Oktober 2024
Thermex

Thermex Silent 100 CZ Bedienungsanleitung

8 Oktober 2024
Master

Master BLM 4800 Bedienungsanleitung

8 Oktober 2024
Hema

Hema 80.06.0005 Bedienungsanleitung

5 Oktober 2024
Imarflex

Imarflex IF-375BU Bedienungsanleitung

2 Oktober 2024
Imarflex

Imarflex IF-365BK Bedienungsanleitung

2 Oktober 2024