Whirlpool AWZ 410/1 Bedienungsanleitung
Whirlpool
Waschtrockner
AWZ 410/1
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Whirlpool AWZ 410/1 (9 Seiten) in der Kategorie Waschtrockner. Dieser Bedienungsanleitung war fĂĽr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/9
12
CONTENTS
BEFORE USING THE APPLIANCE
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
DESCRIPTION OF THE APPLIANCE
FILLING THE DETERGENT AND ADDITIVES
REMOVING THE FILTER
DRAINING RESIDUAL WATER
CARE AND MAINTENANCE
TRANSPORT / HANDLING
INSTALLATION
ELECTRICAL CONNECTION
30120020GB.fm Page 12 Friday, July 15, 2005 3:42 PM
Black process 45.0° 150.0 LPI
13
BEFORE USING THE APPLIANCE
1.Removing the packaging and inspection
•After unpacking, make sure that the appliance is
undamaged. If in doubt, do not use the appliance.
Contact After-Sales Service or your local retailer.
•Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of children,
as they are potentially dangerous.
2.Remove the transport bolts
•The appliance is fitted with transport bolts to
prevent internal damage during transport.
Before using the appliance, you must
remove the transport bolts (see “Installation/
Remove the transport bolts”).
3.Install the appliance
•Move the appliance without carrying it by the
worktop.
•Install the appliance on a solid and level floor
surface, preferably in a corner of the room.
•Make sure that all four feet are stable and resting on
the floor and then check that the appliance is
perfectly level using a spirit level (see Installation/
Adjust the feet”).
4.Water supply
•Connect the water supply inlet hose in
accordance with the regulations of your local
water company (see “Installation/Connect the
water inlet hose”).
• Water supply: Cold water only
• Tap: 3/4” threaded hose
connector.
• Pressure: 0.05-1.00 MPa
(0.5-10 bar).
5.Drain
•Connect the drain hose to the siphon or hook it
over the edge of a sink with the “U” bend
(see “Installation/Connect the water drain hose”).
•If the appliance is connected to a built-in drainage
system, ensure the latter is equipped with a vent
to avoid simultaneous loading and draining of
water (siphoning effect).
6.Electrical connection
•Electrical connections must be carried out by a
qualified technician in compliance with the
manufacturer’s instructions and current standard
safety regulations.
•Voltage information, power consumption and
electrical protection data are supplied on the
inside of the filter cover.
•The appliance must be connected exclusively by
means of a socket with an earth connection in
accordance with current regulations. The
appliance must be earthed by law. The
manufacturer declines all liability for damage to
persons or property deriving directly or
indirectly from failure to observe the directions.
•Do not use extension leads or multi sockets.
•Before any maintenance on the appliance
disconnect it from the mains supply.
•After installation, access to the mains plug or
disconnection from the mains supply must be
ensured at all times via a double-pole switch.
•Do not operate the appliance if it has been
damaged during transport. Inform the After-Sales
Service.
•Mains cable replacement is only to be carried out
by After-Sales Service.
•The appliance must only be used in the
household for the prescribed uses.
30120020GB.fm Page 13 Friday, July 15, 2005 3:42 PM
Black process 45.0° 150.0 LPI
14
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
1.Packing
•The packing material is recyclable as indicated by the
recycling symbol . Adhere to local regulations
when disposing of packaging material.
2.Energy saving tips
•Achieve the best use of energy, water, detergent and
time by using the recommended maximum load size.
•Do not exceed manufacturers’ recommended
dosages as shown on the detergent package.
•The Eco Flap - a special system in the outlet - will
prevent detergent loss from the drum to avoid
detergent loss into the environment.
•Use “Prewash” for heavily soiled laundry only!
Save detergent, time, water and energy
consumption by not selecting “Prewash” for slight
to normally soiled laundry. You save on water,
energy and time as a result.
•Pretreat stains with stain remover or soak dried in
stains in water before washing to reduce the
necessity of a hot wash program.
•Save energy by using a 60° C instead of a 90° C
wash programme or a 40° C instead of a 60° C
wash programme.
•Save energy and time by selecting a high spin
speed to reduce the water content in laundry
before using a drying programme (for appliances
with adjustable spin speed).
3.Disposing of packaging and old appliances
•This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
The symbol on the product, or on the
documents accompanying the product, indicates
that this appliance may not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment.
Disposal must be carried out in accordance with
local environmental regulations for waste disposal.
For more detailed information about treatment,
recovery and recycling of this product, please
contact your local city office, your household
waste disposal service or the shop where you
purchased the product.
•The appliance is built from reusable materials.
Dispose of the appliance in conformity with
environmental regulations.
•Before scrapping, cut off the power cable so that the
appliance cannot be connected to the mains.
•Remove detergent from compartment if you
intend scrapping your appliance.
4.Child safety
•Children must not be allowed to play with the
appliance.
5.General recommendations
•When the appliance is not in use unplug it and
turn off the tap.
•Before cleaning or carrying out maintenance
switch off the appliance and disconnect it from
the mains supply.
•To clean the outside of the appliance, use a
neutral detergent and a damp cloth.
•Do not use abrasive detergents.
•Do not attempt to force the door open.
•If necessary, the power cable may be replaced
with an identical one obtained from our
After-Sales Service. The power cable must only
be replaced by a qualified technician.
6.EC Declaration of Conformity
•This appliance has been designed, constructed
and distributed in compliance with the safety
requirements of EC Directives:
73/23/EEC Low Voltage Directive
89/336/EEC Electromagnetic Compatibility Directive
93/68/EEC CE Marking Directive .
30120020GB.fm Page 14 Friday, July 15, 2005 3:42 PM
Black process 45.0° 150.0 LPI
Produktspezifikationen
| Marke: | Whirlpool |
| Kategorie: | Waschtrockner |
| Modell: | AWZ 410/1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Whirlpool AWZ 410/1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Waschtrockner Whirlpool
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
Bedienungsanleitung Waschtrockner
- Waschtrockner Bosch
- Waschtrockner AEG
- Waschtrockner Siemens
- Waschtrockner Bauknecht
- Waschtrockner Electrolux
- Waschtrockner Gorenje
- Waschtrockner BEKO
- Waschtrockner Hotpoint
- Waschtrockner Sharp
- Waschtrockner Candy
- Waschtrockner Daewoo
- Waschtrockner GE
- Waschtrockner Hoover
- Waschtrockner Hotpoint-Ariston
- Waschtrockner Indesit
- Waschtrockner Neff
- Waschtrockner Privileg
- Waschtrockner Zanussi
Neueste Bedienungsanleitung fĂĽr -Kategorien-
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022