Wells MOD100 Bedienungsanleitung
Wells
Warmhalteplatte
MOD100
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Wells MOD100 (16 Seiten) in der Kategorie Warmhalteplatte. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OWNERS MANUAL
BUILT-IN
SINGLE-WELL
MODULAR
WARMERS
with
INFINITE SWITCH
CONTROL
MODELS
MOD100
MOD100D
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
012C
p/n 2M-308029 Rev. (-) M012C.01 110124
MOD-100
Unless otherwise specified, all commercial cooking
equipment manufactured by WELLS MANUFACTURING is
warranted against defects in materials and workmanship for
a period of one year from the date of original installation or
18 months from the date of shipment from our factory,
whichever comes first, and is for the benefit of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE, AND/OR FOR DIRECT,
INDIRECT OR CONSEQUENTIAL DAMAGES IN CONNEC-
TION WITH WELLS MANUFACTURING PRODUCTS.
This warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modified, misused, misapplied, improperly installed, or dam-
aged in transit or by fire, flood or act of God. It also does not
apply if the serial nameplate has been removed, or if service
is performed by unauthorized personnel. The prices charged
by Wells Manufacturing for its products are based upon the
limitations in this warranty. Seller’s obligation under this
warranty is limited to the repair of defects without charge by
a Wells Manufacturing factory authorized service agency or
one of its sub-service agencies. This service will be provid-
ed on customer’s premises for non-portable models. Porta-
ble models (a device with a cord and plug) must be taken or
shipped to the closest authorized service agency, transpor-
tation charges prepaid, for service. In addition to restrictions
contained in this warranty, specific limitations are shown in
the Service Policy and Procedure Guide. Wells Manufactur-
ing authorized service agencies are located in principal cit-
ies. This warranty is valid in the United States and Canada
and void elsewhere. Please consult your classified tele-
phone directory, your foodservice equipment dealer or con-
tact:
Wells Manufacturing
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 781-2777 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment in
this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specified on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted for
ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.
M012C.01 2M-308029 Owners Manual for Single-Well Inf.Sw. MOD-Warmers
1
WARRANTY xi
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 6
MAINTENANCE INSTRUCTIONS 7
CLEANING INSTRUCTIONS 8
TROUBLESHOOTING SUGGESTIONS 10
WIRING DIAGRAM 10
EXPLODED VIEW & PARTS LIST 11
PARTS & SERVICE 12
CUSTOMER SERVICE DATA 13
Thank You for purchasing this Wells Manufacturing appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
INTRODUCTION
M012C.01 2M-308029 Owners Manual for Single-Well Inf.Sw. MOD-Warmers
SPECIFICATIONS
MODEL VOLTS AMPS WATTS POWER SUPPLY CORD
MOD-100
MOD-100D,
MOD1006
120 VAC 1ø 10.0A 1200W
NOT PROVIDED 208 VAC 1ø 4.3A 900W
240 VAC 1ø 5.0A 1200W
Produktspezifikationen
| Marke: | Wells |
| Kategorie: | Warmhalteplatte |
| Modell: | MOD100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Wells MOD100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Warmhalteplatte Wells
17 August 2024
16 August 2024
15 August 2024
14 August 2024
13 August 2024
13 August 2024
13 August 2024
13 August 2024
10 August 2024
8 August 2024
Bedienungsanleitung Warmhalteplatte
- Warmhalteplatte Tristar
- Warmhalteplatte Royal Catering
- Warmhalteplatte Ardes
- Warmhalteplatte Bifinett
- Warmhalteplatte Rommelsbacher
- Warmhalteplatte Unold
- Warmhalteplatte CombiSteel
- Warmhalteplatte Hendi
- Warmhalteplatte Steba
- Warmhalteplatte Fritel
- Warmhalteplatte Waring Commercial
- Warmhalteplatte Bartscher
- Warmhalteplatte Topcom
- Warmhalteplatte Olympia
- Warmhalteplatte Beem
- Warmhalteplatte Ariete
- Warmhalteplatte Lentz
- Warmhalteplatte Saro
- Warmhalteplatte Suntec
- Warmhalteplatte Esperanza
- Warmhalteplatte Proctor Silex
- Warmhalteplatte Bellini
- Warmhalteplatte Swan
- Warmhalteplatte CaterChef
- Warmhalteplatte Duronic
- Warmhalteplatte Salton
- Warmhalteplatte Hatco
- Warmhalteplatte Avantco
- Warmhalteplatte Chefman
- Warmhalteplatte Max Pro
- Warmhalteplatte Merco
- Warmhalteplatte Perfect Fry
- Warmhalteplatte APW Wyott
- Warmhalteplatte Alto-Shaam
- Warmhalteplatte Benchmark USA
- Warmhalteplatte Casselin
- Warmhalteplatte Brentwood
Neueste Bedienungsanleitung fĂĽr -Kategorien-
15 Oktober 2024
21 September 2024
19 September 2024
6 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
2 September 2024