Weldex WDAC-4277DT Bedienungsanleitung

Weldex Bewakingscamera WDAC-4277DT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Weldex WDAC-4277DT (12 Seiten) in der Kategorie Bewakingscamera. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/12
V.01I
WDAC-4277DT
Digital BOX Camera Installation Guide2
1.0 Features
Digital BOX Camera Installation Guide 3
1/3”Sony Super HAD CCD II : 410K(NTSC)/470K(PAL) pixels
High Resolution 600 TV Lines
Day & Night (ICR)
Digital Wide Dynamic Range
Digital Noise Reduction
Privacy mask Function
On Screen Display
Motion detection
Parking Line
High Light Compensation
IR Smart
Regulatory Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
These limits are designed to provide
digital device, pursuant to Part 15 of the FCC Rules.
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
may cause harmful interference
installed and use in accordance with the instructions,
to radio communications.
Operation of this equipment in a residential area is likely to cause interference, in which
interference at his own expense.
case the user will be required to correct the
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK),
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The ligh nint g f h las with an arrowhead sy , mbol wi hit n an equila erat l t e is riangl in endet d to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.
The exclama iot n point wi hit n an equila erat l t e is riangl in endet d to alert the user to the presence of impor ant t opera int g and m t ceain enan
(servicing) instructions in the literature accompanying the appliance.
WARNING-
Changes or modicat s ion not ex ly press approved by the manu urefact r c d v d the us s oul oi er au horit ty to operate the equipment.
CAUTION- To prevent electric shock and risk of re hazards:
Do NOT use power sources other than that specied. Do NOT expose this appliance to rain or moisture.
2.0 Warnings
The camera needs periodic inspection.
Contact an authorized technician for inspection.
Stop using your camera when you find a malfunction.
If you use your camera around smoke or unusual heat for a long time, fire may be caused.
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not disassemble the camera.
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in fire or other hazards.
Digital BOX Camera Installation Guide4
Digital BOX Camera Installation Guide 5
3.0 Precautions
Do not install the camera in extreme
temperature conditions.
Only use the camera under conditions
where temperatures are between -10
Deg. C and +50 Deg. C.(14 Deg. F and
122 Deg. F) Be especially careful to
provide ventilation when operating
under high temperatures.
Do not install or use the camera in an
environment where the humidity is high.
It can cause the image quality to be
poor.
Do not install the camera under
unstable lighting conditions.
Severe lighting change or flicker can
cause the camera to work improperly.
Do not touch the front lens of the
camera.
It is one of the most important parts
of the camera. Be careful not to be
stained by fingerprint.
Do not drop the camera or subject
them to physical shocks.
It can cause malfunctions to occur.
Never ke ep the camera face t o
strong light directly.
It can damage the CCD.
Do not expose the camera to rain
or spill beverage on it.
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that
corrode the electronic components.
Do n o t e xp o s e th e ca me ra to
radioactivity.
If it is exposed to radioactivity, For
heated CCD, it will be out of order.
Note
If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur.
Please check that the power satisfies the normal specification before connecting the camera.

Produktspezifikationen

Marke: Weldex
Kategorie: Bewakingscamera
Modell: WDAC-4277DT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Weldex WDAC-4277DT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Bewakingscamera Weldex

Weldex

Weldex WDAC-4277DT Bedienungsanleitung

19 August 2024
Weldex

Weldex WDC-4605XV Bedienungsanleitung

19 August 2024

Bedienungsanleitung Bewakingscamera

Neueste Bedienungsanleitung für -Kategorien-

Abus

Abus IPCB68620 Bedienungsanleitung

17 September 2024
Hikvision

Hikvision THC-B120-M Bedienungsanleitung

17 September 2024
Hikvision

Hikvision DS-2XE6885G0-IZ Bedienungsanleitung

17 September 2024
Dahua Technology

Dahua Technology Pro HAC-HFW2221SP-0280B Bedienungsanleitung

17 September 2024
Ring

Ring Alarm Range Extender Bedienungsanleitung

17 September 2024
Hikvision

Hikvision DS-2CE19DF8T-AZE Bedienungsanleitung

17 September 2024
Hikvision

Hikvision iDS-2CD7A46G0/P-IZHS Bedienungsanleitung

16 September 2024
Hikvision

Hikvision DS-2CD2346G2-I Bedienungsanleitung

16 September 2024
Hikvision

Hikvision DS-2CE56C2T-IT3(16MM) Bedienungsanleitung

16 September 2024
Swann

Swann SW312-HMD-CA Bedienungsanleitung

16 September 2024