Watson AM-160-CS-R Bedienungsanleitung

Watson Accu's camera AM-160-CS-R

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Watson AM-160-CS-R (5 Seiten) in der Kategorie Accu's camera. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Thank you for choosing Watson Pro
Please read this user manual carefully, and keep
it for reference before using the battery.
AM-160-CS-R
VM-160-CS-R
Cine style
Li-ion Battery with LED
and 3-Stud or V-Mount
SAFETY INSTRUCTIONS
Make sure the battery is fully charged before use.
When not in use, remove the battery from its device. Some
electronic equipment will draw current even when the switch is off.
Do not short-circuit the terminals. This battery is protected with
an internal self-resetting fuse, but short circuits may still cause
severe damage to the battery.
Do not attempt to open the battery case under any circumstances.
Do not remove the battery from any equipment that is powered on.
Always power off your equipment before removing the battery.
Use the battery under proper environmental conditions: 14°F to
122°F (-10°C to 50°C) with a Relative Humidity (RH) less than 85%.
The battery may be warm during use or recharging. This is normal.
The battery should be charged up to 40% for storage longer than
one month, and should be charged every 6 months.
Keep the battery away from fire, heat, and high pressure.
Do not expose the battery to rain or moisture.
Do not drop the battery or subject it to strong shocks.
Keep this unit away from water and any flammable gases or liquids.
Clean the battery and terminals with only a clean, soft,
and dry cloth.
When operation time has noticeably decreased, the battery may
need to be replaced.
Keep this product away from children.
Store the battery in a cool, dry place.
OVERVIEW
1. Battery-level LED meter
Shows remaining capacity of
the battery. When capacity
reaches less than 9%, the
leftmost LED will flash.
1. Battery-level check button
1. D-tap output
12 V, 10 A max
1. USB output
Press the battery-level check
button to start charging or to
power your USB device.
1. Mounting interface: 3-stud
or V-mount
1
2
3
4
5
4
1
2
5
3
PRODUCT FEATURES
High-powered li-ion cells provide constant output up
to 120 W and 10 A.
Battery-level LED indicators for remaining battery
capacity.
Built-in D-tap connector powers your camera
accessories.
5 V/1 A USB 2.0 output for USB-powered devices.
Built-in intelligent control circuit protects against
damage from current or voltage overload,
overheating, or short circuits.

Produktspezifikationen

Marke: Watson
Kategorie: Accu's camera
Modell: AM-160-CS-R

Brauchst du Hilfe?

Wenn Sie Hilfe mit Watson AM-160-CS-R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten