Wasp WCS3900 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Wasp WCS3900 (41 Seiten) in der Kategorie Barcode-Leser. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/41
WCS 3900/3905
Programming Guide
Please Read
Note:
The Wasp WCS 3900 / 3905 Scanners are ready to scan
the most popular bar codes out of the box. This manual
should onl be used to make changes in they
configuration of the scanner for specific applications.
These scanners do not require software or drivers to
operate. The scanner enters data as keyboard data. Please
review this manual before scanning any of the programming
bar codes in this manual.
Tech Tip
If you are unsure of the scanner configuration or have
scanned the incorrect codes, please scan the default
bar code on page 6. This will reset the scanner to its
factory settings.
Check Version
© Copyright Wasp Technologies 2006
Version 2.54
No part of this publication may be reproduced or transmitted in any form or
by any means without the written permission of Wasp Technologies. The
information contained in this document is subject to change without notice.
Wasp is a tr Wasp Technologies. All other trademarks or registered trademarks are theademark of
property of their respective owners.
Table of Contents
Chapter 1. Introduction ..............................................................................1
Chapter 2. Bar Code Symbologies............................................................2
Chapter 3. Installation................................................................................3
Chapter 4. Quick Start.............................................................................. 4
Chapter 5. Setup & Configuration ........................................................5-28
1. Factory Default & Keyboard Connection ....................6
2. Autosense Stand Mode ..............................................6
3. Beep and Delay ......................................................7-8
4. Upper/Lower Case......................................................9
5. Keyboard Language ................................................10
6. Preamble/Postamble Configuration ..........................11
7. Terminator/Code ID ..................................................12
8. Enable/Disable Bar Code Symbologies ..............13-14
9. Bar Code Symbology Settings ............................15-27
Code 39 ..........................................................15
Interleaved 2 of 5 and Code 93 ......................16
Code 128 and UCC/EAN 128..........................17
MSI/Plessey ....................................................18
Codabar ..........................................................19
UPC-A..............................................................20
UPC-A Supplemental / UPC-A to EAN-13 ......21
UPC-E..............................................................22
UPC-E Supplemental ......................................23
EAN-8 ..............................................................24
EAN-8 Supplemental ......................................25
EAN-13 ............................................................26
EAN-13 Supplemental ....................................27
Appendix A Bar Code Test Symbols ....................................................28-30
Appendix B ASCII Table 31-34
Appendix C Codes for PC 35
Appendix D Technical Specifications 36
Product Support ....................................................................37
Warranty ................................................................................37
Frequently Asked Questions..................................................38


Produktspezifikationen

Marke: Wasp
Kategorie: Barcode-Leser
Modell: WCS3900

Brauchst du Hilfe?

Wenn Sie Hilfe mit Wasp WCS3900 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Barcode-Leser Wasp

Bedienungsanleitung Barcode-Leser

Neueste Bedienungsanleitung für -Kategorien-