Walrus Audio Emissary Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Walrus Audio Emissary (1 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
[em-uh-ser-ee] Anatomy. Sending or coming out, as certain veins
that pass through the skull and connect the venous sinuses inside
with the veins outside.
Like the veins its named after, the Emissary Parallel Boost features
two independent boost circuits running in parallel to work together
to help give your tone a real sinus clearing experience. Use one or
the other by itself, or mix any combination of both by turning up
each knob to the desired level. Great for making leads stand out,
slides sing, and î›°nger picking really come to life.
BRIGHT
Clean, high headroom JFET boost,
with a slight emphasis on higher
frequencies to liven up your tone.
MID
Controls volume for mid boost
circuit. This circuit features a
targeted boost at either 1kHz or
800Hz depending on how the
toggle switch is set.
1kHz OR 800Hz TOGGLE
Selects which frequency the MID
boost works with.
BYPASS LED
Illuminated when the effect is on.
BYPASS SWITCH
Turns the effect on and off.
OUTPUT JACK
1/4 inch cable to ampliî›°er.
INPUT JACK
1/4 inch cable from instrument.
9V JACK
9-volt DC, Center Negative,
100ma min.
EMISSARY
PARALLEL BOOST
The bypass switch also features a momentary function. When the bypass
switch is in off position, press and hold to temporarily activate the effect.
Releasing the switch turns the effect off.
MOMENTARY FUNCTION


Produktspezifikationen

Marke: Walrus Audio
Kategorie: Hi-Fi-Anlage
Modell: Emissary

Brauchst du Hilfe?

Wenn Sie Hilfe mit Walrus Audio Emissary benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Hi-Fi-Anlage Walrus Audio

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung für -Kategorien-