Wagner HT775 Bedienungsanleitung
Wagner
Hitzepistole
HT775
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Wagner HT775 (32 Seiten) in der Kategorie Hitzepistole. Dieser Bedienungsanleitung war fĂźr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/32
EnglishFrançaisEspaùol
0908 ⢠Form No. 0283739J
Heat Gun
Model HT775
Ownerâs Manual
Read all instructions and product labels. When using
electrical tools, follow all precautions to reduce the
risk of îre, electric shock, and other personal injury.
1-800-727-4023
Wagner Technical Service
http://www.wagnerspraytech.com
Register your product online at:
Need help? Call us first for answers fast.
Call Wagner toll-free if you have any comments
or problems with this Wagner product.
1770 Fernbrook Lane, Plymouth, MN 55447
56M8
English
2
General Description
This heat gun is a quality power tool. Like any power tool, it can be dangerous when
misused. Read the following instructions carefully and follow all safety precautions. It is
the responsibility of the owner to use the heat gun properly.
Speciîcations
Housing: ........................................................................................................ Die cast metal
Wattage: ...................................................................... 1680 Watts. Operates on 120 VAC
Heat Output: ............................................................................... 750ºF to 1000°F nominal.
BTUs ............................................................................. Approximately 5700 BTUs on high
Uses
⢠Soften paint, caulking and putty for easier removal
⢠Soften adhesives to help remove îoor tiles
⢠Bend plastic pipes
⢠Shrink tubing for electrical work
⢠Shrink plastic îlm for wrapping or weatherprooîng
⢠Loosen rusted nuts, bolts and îttings
Parts listing
2
1
3
4
5
6
7
8
9
10
11
12
13
14
Item Number Description Qty.
1 0283481 Shield ............................... 1
2 9820906 Washer ............................. 1
3 9803111 Screw ............................... 1
4 0283482 Nozzle .............................. 1
5 9803111 Screw ............................... 1
6 9820906 Washer ............................. 1
7 0283490 Screen .............................. 1
Item Number Description Qty.
8 0283492 Plate ................................. 1
9 0293491 Retaining ring ................... 1
10 9804924 Screw ............................... 1
11 0283485 Mica sheet ....................... 1
12 0283292 Element assembly ............ 1
13 0283484 Stand................................ 1
14 --------- Basic unit assembly ......... 1
English
3
Important Safety Information ⢠Read all safety information
before operating the equipment. Save these instructions
To reduce the risks of îre or explosion, electrical shock and the injury to persons,
read and understand all instructions included in this manual. Be familiar with the
controls and proper usage of the equipment.
Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
HAZARD: POISON
Extreme care should be taken when stripping paint. The peelings, residue and vapors of
paint may contain lead, which is poisonous. Any paint applied to homes before 1950 is
likely to contain lead. Any paint manufactured before 1977 may contain lead. Once the
paint is deposited on surfaces, hand-to-mouth contact can result in the ingestion of lead.
Exposure to even low levels of lead can cause irreversible brain and nervous system
damage. Young and unborn children are particularly vulnerable to lead poisoning.
Before beginning any paint removal process you should determine whether the paint
you are removing contains lead. This can be done by your local health department or
by a professional who uses a paint analyzer to check the lead content of the paint to be
removed. Lead-based paint should only be removed by a professional and should not be
removed using a heat gun.
PREVENTION:
1. Move the work piece outdoors. If this is not possible, keep the work area well
ventilated. Open the windows and put an exhaust fan in one of them. Be sure the
fan is moving the air from inside to outside.
2. Remove or cover any carpets, rugs, furniture, clothing, cooking utensils and air
ducts.
3. Place drop cloths in the work area to catch any paint chips or peelings. Wear
protective clothing such as extra work shirts, overalls and hats.
4. Work in one room at a time. Furnishings should be removed or placed in the
center of the room and covered. Work areas should be sealed off from the rest of
the dwelling by sealing doorways with drop cloths.
5. Children, pregnant or potentially pregnant women and nursing mothers should not
be present in the work area until the work is done and all cleanup is complete.
6. Wear a dust respirator mask of a dual îlter respirator mask for dust and fumes
which has been approved by the Occupational Safety and Health Administration
(OSHA) the National Institute of Safety and Health (NIOSH), or the United States
Bureau of Mines. These masks and replaceable îlters are readily available at
major hardware stores. Be sure that the mask îts properly. Beards and facial hair
may keep masks from sealing properly. Change the îlters often. Disposable paper
masks are not adequate.
7. Use caution when operating the heat gun. Keep the heat gun moving as excessive
heat will generate fumes which can be inhaled by the operator.
8. Keep food and drink out of the work area. Wash hands, arms and face and rinse
mouth before eating or drinking. Do not smoke or chew gum or tobacco in the work
area.
9. Clean up all removed paint and dust by wet mopping the îoors. Use a wet cloth
to clean all walls, sills and any other surface where paint dust is clinging. Do
not sweep, dry dust or vacuum. Use a high phosphate detergent of trisodium
phosphate (TSP) to wash and mop areas.
10. At the end of each work session, put the paint chips and debris in a double plastic
bag, close it with tape or twist ties and dispose of properly.
11. Remove protective clothing and work shoes in the work area to avoid carrying dust
into the rest of the building. Wash work clothes separately. Wipe shoes off with
a wet rag and then wash it with the work clothes. Wash hair and body thoroughly
with soap and water.
Produktspezifikationen
Marke: | Wagner |
Kategorie: | Hitzepistole |
Modell: | HT775 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Wagner HT775 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hitzepistole Wagner
14 Juni 2024
21 September 2023
21 September 2023
21 September 2023
16 August 2023
1 Juni 2023
8 November 2022
18 Oktober 2022
Bedienungsanleitung Hitzepistole
- Hitzepistole Makita
- Hitzepistole Bosch
- Hitzepistole Parkside
- Hitzepistole Vonroc
- Hitzepistole AEG
- Hitzepistole Black And Decker
- Hitzepistole FERM
- Hitzepistole Rapid
- Hitzepistole Ryobi
- Hitzepistole Trotec
- Hitzepistole DeWalt
- Hitzepistole Einhell
- Hitzepistole Hikoki
- Hitzepistole Hitachi
- Hitzepistole Metabo
- Hitzepistole Steinel
- Hitzepistole Fieldmann
- Hitzepistole Qlima
- Hitzepistole Weller
- Hitzepistole Holzmann
- Hitzepistole Genesis
- Hitzepistole Craftsman
- Hitzepistole Alpha Tools
- Hitzepistole Wagner SprayTech
- Hitzepistole Meister Craft
Neueste Bedienungsanleitung fĂźr -Kategorien-
7 Juni 2024
7 Juni 2024
7 Juni 2024
26 Mai 2024
3 Mai 2024
1 Mai 2024
20 April 2024
3 April 2024
28 März 2024
27 März 2024