Wagner SprayTech Power Painter Bedienungsanleitung
Wagner SprayTech
Farbenspritzpistole
Power Painter
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Wagner SprayTech Power Painter (19 Seiten) in der Kategorie Farbenspritzpistole. Dieser Bedienungsanleitung war fĂźr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/19
English
Ownerâs Manual
Read this manual for complete instructions
Table of Contents
Safety Information ................................................... 2
Whatâs in the Box .................................................... 3
Before you Begin ..................................................... 4
Selecting the proper spray tip............................. 4
Important preparation tips .................................. 4
Setup ......................................................................5-6
Material container setup ..................................... 5
Remote suction set setup ................................... 6
Flow Control Knob / Practice Spraying ................. 7
Material thinning ................................................. 7
Usage ........................................................................ 8
Priming with remote suction set ......................... 8
Spraying (Overspray) ......................................... 8
Spray Technique...................................................... 9
Cleanup - Latex Materials ................................10-11
Cleaning the material container........................ 10
Cleaning the remote suction set ....................... 11
Cleanup - Oil-based Materials .............................. 12
Cleaning the material container........................ 12
Cleaning the remote suction set ....................... 13
Cleaning the Components .................................... 14
Reassembly............................................................ 14
Maintenance ........................................................... 15
Replacement parts ................................................ 15
Troubleshooting .................................................... 16
Product registration .......................................... 16
Parts List ...........................................................50-51
Warranty ................................................................. 52
0109 ⢠Form No. 0525800B
1-800-328-8251
Wagner Technical Service
1770 Fernbrook Lane, Plymouth, MN 55447
http://www.wagnerspraytech.com
Register your product online at:
Need Help? Call us îrst for answers fast.
Call Wagner Spray Tech toll-free if you have any
comments or problems with this product.
Technical service hours: Monday through Friday, 8:00 am to 7:00 pm Central Time
This symbol indicates a hazardous situation, which, if not
not avoided could result in death or serious injury.
HAZARD: INJECTION INJURY
A high pressure stream of paint produced by this equipment
can pierce the skin and underlying tissues, leading to serious
injury and possible amputation.
DO NOT TREAT AN INJECTION INJURY AS A SIMPLE
CUT! Injection can lead to amputation. See a physician
immediately.
NOTE TO PHYSICIAN:
Injection into the skin is a traumatic injury. It is important to treat
the injury surgically as soon as possible. DO NOT delay treatment to
research toxicity. Toxicity is a concern with some coatings injected
directly into the blood stream. Consultation with a plastic surgeon or
reconstructive hand surgeon may be advisable.
PREVENTION:
⢠NEVER aim the gun at any part of the body.
⢠Do not aim the gun at, or spray any person or animal.
⢠NEVER allow any part of the body to come in contact with the îuid
stream.
⢠NEVER put your hand in front of the gun. Wear gloves. Gloves will
not provide protection against an injection injury.
⢠Keep hands and other body parts away from the discharge. For
example, do not try to stop leaks with any part of the body.
⢠Always unplug the spray gun before servicing, cleaning tip guard,
changing tips, or leaving unattended.
⢠Always use the nozzle tip guard. Do not spray without nozzle tip
guard in place.The tip guard provides some protection against
injection injuries but is mainly a warning device. Only use a nozzle
tip speciîed by Wagner.
HAZARD: EXPLOSION OR FIRE
Solvent and paint fumes can explode or ignite, causing
property damage and/or severe injury.
PREVENTION:
⢠Exhaust and fresh air introduction must be provided
to keep the air within the spray area free from accumulation of
îammable vapors.
⢠Avoid all ignition sources such as static electricity
sparks, open îames, pilot lights, hot objects,
cigarettes, and sparks from connecting and
disconnecting power cords or working light switches.
⢠Fire extinguishing equipment must be present and in
good working order.
⢠Follow the material and solvent manufacturerâs safety precautions
and warnings.
⢠Do not spray îammable or combustable materials near an open
îame or sources of ignition such as cigarettes, motors, and electrical
equipment.
⢠Know the contents of the paints and solvents being sprayed. Read
all Material Safety Data Sheets (MSDS) and container labels
provided with the paints and solvents. Follow the paint and solvent
manufacturerâs safety instructions.
HAZARD: EXPLOSION HAZARD DUE TO
INCOMPATIBLE MATERIALS
Will cause property damage or severe injury.
PREVENTION:
⢠Do not use bleach.
⢠Do not use halogenated hydrocarbon solvents such as methylene
chloride and 1,1,1 - trichloroethane. They are not compatible with
aluminum and may cause an explosion. If you are unsure of a
materialâs compatibility with aluminum, contact your coating supplier.
English
2
Important Safety Information ¡ Read all safety information before operating
the equipment. SAVE THESE INSTRUCTIONS.
To reduce the risks of îre or explosion, electrical shock and the injury to persons, read and understand all instructions included in
this manual. Be familiar with the controls and proper usage of the equipment.
HAZARD: HAZARDOUS VAPORS
Paints, solvents, insecticides, and other materials can be
harmful if inhaled or come in contact with the body. Vapors
can cause severe nausea, fainting, or poisoning.
PREVENTION:
⢠Use a respirator or mask if vapors can be inhaled.
Read all instructions supplied with the mask to be
sure it will provide the necessary protection.
⢠Wear protective eyewear.
⢠Wear protective clothing as required by coating manufacturer.
HAZARD: GENERAL
Can cause severe injury or property damage.
PREVENTION:
⢠Read all instructions and safety precautions for equipment and
spray material before operating any equipment.
⢠Comply with all appropriate local, state, and national codes
governing ventilation, îre prevention, and operation.
⢠Keep sprayer out of the reach of children.
⢠Hearing protection is recommended for extended use.
⢠Always wear appropriate gloves, eye protection and a respirator or
mask when painting.
⢠Do not operate or spray near children. Keep children away from
equipment at all times.
⢠Do not overreach or stand on an unstable support. Keep effective
footing and balance at all times.
⢠Stay alert and watch what you are doing.
⢠Do not operate the unit when fatigued or under the inîuence of
drugs or alcohol.
HAZARD: ELECTRIC SHOCK HAZARD
May cause severe injury.
PREVENTION:
⢠Keep electrical cord plug and spray gun trigger free
from paint and other liquids. Never hold cord at plug connections to
support cord. Failure to observe may result in an electrical shock.
⢠Never immerse electrical parts in water or any other liquid. Wipe the
exterior of the sprayer with a damp cloth for cleaning. Always make
sure the sprayer is unplugged before taking it apart for cleaning.
IMPORTANT: Use only a 3-wire extension cord that has a 3-blade
grounding plug and a 3-slot receptacle that will accept the plug on the
product. Make sure your extension cord is in good condition. When
using an extension cord, be sure to use one heavy enough to carry the
current your product will draw. For lengths less than 50 feet, use a No.
18 AWG extension cord. For lengths more than 50 feet, use a No. 14 or
No. 16 AWG extension cord. An undersized cord will cause a drop in
line voltage resulting in loss of power and overheating.
Wagner Spray Tech accessory extension cords recommended:
P/N 0090241 20 foot extension cord.
P/N 0090242 35 foot extension cord.
Minimum gauge for extension cords
Cord length (feet)Voltage
Ampere
rating
range
2 - 3
120V
25-50
100 150 200 250 300 400 500
18
16 14 14 12 12 10 10
3 English
Important Safety Information ¡ Read all safety information before operating
the equipment. SAVE THESE INSTRUCTIONS.
Grounding Instructions
This product must be grounded. In the event of an electrical short
circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This product is equipped with a
cord having a grounding wire with an appropriate grounding plug.
The plug must be plugged into an outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
WARNING - Improper installation of the grounding plug
can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary,
do not connect the green grounding wire to either îat blade
terminal. The wire with insulation having a green outer surface
with or without yellow stripes is the grounding wire and must be
connected to the grounding pin.
Check with a qualiîed electrician or serviceman if the grounding
instructions are not completely understood, or if you are in doubt
as to whether the product is properly grounded. Do not modify
the plug provided. If the plug will not ît the outlet, have the proper
outlet installed by a qualiîed electrician.
This product is for use on a nominal 120 volt circuit and has a
grounding plug that looks like the plug illustrated below. Make
sure that the product is connected to an outlet having the same
conîguration as the plug. No adapter should be used with this
product.
Grounded Outlet
Grounding Pin
Cover for grounded outlet box
Whatâs in the Box
(e)
(f)
(g)
(a)
(b)
(c)
(d)
(6)
(5)
(4)
(3)
(2)(1)
(k)
(i)
(m)
(j)
(l)
(h)
a) Sprayer assembly
b) Spray tip
c) Suction tube with îlter
d) Material container
e) Flow control knob
f) Trigger
g) Pump assembly
1) Locking nut
2) Atomizer valve
3) Pump housing ring
4) Pump housing
5) Spring
6) Piston
h) Dual hose îtting
i) Quick Flush lid
j) Remote suction hoses
k) Container clip
l) Oil lubricant*
m) Cleaning brush
* Included in some models.
Produktspezifikationen
| Marke: | Wagner SprayTech |
| Kategorie: | Farbenspritzpistole |
| Modell: | Power Painter |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Wagner SprayTech Power Painter benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Farbenspritzpistole Wagner SprayTech
7 Februar 2024
3 Januar 2024
26 Dezember 2023
Bedienungsanleitung Farbenspritzpistole
- Farbenspritzpistole Parkside
- Farbenspritzpistole Black And Decker
- Farbenspritzpistole Cocraft
- Farbenspritzpistole Einhell
- Farbenspritzpistole Tacklife
- Farbenspritzpistole Wagner
- Farbenspritzpistole Power Craft
- Farbenspritzpistole Aerotec
- Farbenspritzpistole Earlex
- Farbenspritzpistole Powerplus
- Farbenspritzpistole Ozito
- Farbenspritzpistole Meister Craft
- Farbenspritzpistole Truper
- Farbenspritzpistole Chapin
- Farbenspritzpistole XU1
- Farbenspritzpistole Birchmeier
Neueste Bedienungsanleitung fĂźr -Kategorien-
26 Juni 2024
26 Juni 2024
13 Juni 2024
2 Juni 2024
10 Mai 2024
26 April 2024
26 April 2024
22 April 2024
10 April 2024
8 April 2024