WAGAN Solar e Bedienungsanleitung

WAGAN powerbank Solar e

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für WAGAN Solar e (10 Seiten) in der Kategorie powerbank. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

VT8237 SATA RAID User Manual

Enter BIOS Configuration Utility

When the system powers on, the following information will appear on

screen. Press the ‘Tab’ key to enter BIOS configuration

utility.

VIA Technologies,Inc.VIA Serial ATA RAID BIOS Setting Utility v1.00

Scan Devices,Please wait . . .

Press < Tab > Key into User Window!

Channel 0 Master: IC35L040AVVA07-0

Channel 1 Master: IC35L040AVVA07-0

The main interface of BIOS conguration utility is as below:

VIA Tech. RAID BIOS Ver 1.00

8Create Array Create a RAID array with

8Delete Array the hard disks attached to

8Create/Delete Spare VIA IDE controller

8Select Boot Array

8Serial Number View F1 : View Array/disk Status

éê : Move to next item

Enter : Conrm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

VT8237 SATA RAID User Manual

Technical Reference Booklet

Create Disk Array

1. Use the arrow keys to navigate the main menu. Use the up and down arrow keys to

select the Create Array command and press <Enter> to call out the list of creation

steps.

VIA Tech. RAID BIOS Ver 1.00

8Auto Setup For Data Security Create a RAID array with

8Array Mode RAID 1 (Mirroring) the hard disks attached to

8Select Disk Drives VIA IDE controller

8Start Create Process

F1 : View Array/disk Status

éê : Move to next item

Enter : Conrm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

2. Highlight the Array Mode and press <Enter>, then a list of array modes will appear.

Just highlight the target array mode that you want to create, and press <Enter> to

VIA Tech. RAID BIOS Ver 1.00

8RAID 0 for performance Create a RAID array with

8RAID 1 for data protection the hard disks attached to

VIA IDE controller

8RAID SPAN for capacity

F1 : View Array/disk Status

éê : Move to next item

Enter : Conrm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

3. After selected array mode, there are two methods to create a disk array. One method

is “Auto Setup Auto Setup” another is “Select Disk Drives”. let BIOS select the

disk drives and create array automatically. Select Disk Drives let user select the array

drives by required. When using Select Disk Drives method, the channel column will be

activated. Just highlight the target drives that you want to use and press <Enter> to

select them respectively. After all drives have been selected, press <Esc> to go back

to the creation steps menu.

VIA Tech. RAID BIOS Ver 1.00

8Auto Setup For Performance Create a RAID array with

8Array Mode RAID 0 (Striping) the hard disks attached to

8Select Disk Drives VIA IDE controller

8Block Size 64K

8Start Create Process F1 : View Array/disk Status

éê : Move to next item

Enter : Conrm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

[ * ]Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Stripe0

[ ]Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

4. If user selected a RAID 0 array in step 2, user also can select a block size for the

array. Use the arrow key to highlight the Block Size and press <Enter>, then select a

block size from will popup. The block size can be selected from 4K to 64K Bytes.

VIA Tech. RAID BIOS Ver 1.00

8Auto Setup For 4K Create a RAID array with

8Array Mode RAID 8K the hard disks attached to

8Select Disk Dri 16K VIA IDE controller

8Block Size 64K 32K

8Start Create Pr 64K F1 : View Array/disk Status

éê : Move to next item

Enter : Conrm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

[ * ]Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Stripe0

[ * ]Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Stripe1

Create Disk Array

Produktspezifikationen

Marke:	WAGAN
Kategorie:	powerbank
Modell:	Solar e
Akku-/Batteriekapazität:	4000 mAh
Breite:	127 mm
Tiefe:	84 mm
Gewicht:	204 g
Mitgelieferte Kabel:	USB
Produktfarbe:	Weiß
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Höhe:	25 mm
LED-Anzeigen:	Ja
Akku-/Batteriespannung:	3.7 V
Anzahl der USB-Anschlüsse:	2
Ausgangsspannung:	5 V
Eingangsspannung:	5.5 V
Aufladekompatibilität:	Universal
Batterie Aufladezeit (USB):	3 h
Batterie Aufladezeit (solar):	8 h