Waeco Coolmatic CF Bedienungsanleitung

Waeco Kühlen, Gefrieren Coolmatic CF

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Waeco Coolmatic CF (6 Seiten) in der Kategorie Kühlen, Gefrieren. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/6
WAECO USA • Clinton, CT • www.waecousa.com
Instructional &
Operating Manual
›For CoolFreeze™ Series
Portable Refrigerators/Freezers
CF-18, CF-25, CF-35,
CF-40, CF-50, CF-80, CF-110
2WAECOUSA • CF SERIES MANUAL
Safety indications in the text are marked with this symbol:
SAFETY INSTRUCTIONS
•DANGER! Never touch uninsulated cables with bare hands.
This applies especially to handling AC cables.
•DANGER! When installed in a boat, and the device is
operated with power cords, it is necessary that the system is
protected by a fuse and an earth leakage protection device.
• Installation of AC in a boat/vehicle should be completed
by a qualified technician.
• Always ensure that your refrigerator is disconnected from
the battery before using a high-speed battery charger.
• Always ensure that the correct voltage is applied to the
refrigerator, the voltage is stated on the refrigerator or
cooling unit's data plate.
• Never open the cooling circuit.
•Always be aware that batteries contain corrosive acid and
therefore should be treated with extreme care.
•The cooling device is not appropriate for transporting
corrosive or solvent-comprising substances.
• Never obstruct vents to the refrigerator’s compressor.
• Defrost the refrigerator on a regular basis.
• Never use hard or sharp instruments to remove ice
from the liner.
• Never use abrasive or solvent based materials
when cleaning the liner.
• When the refrigerator or cooling device comes to the end of
its working life, it should be disposed of by appropriate per-
son to ensure that is does not contaminate the environment.
•Do not use any electric appliance inside the cooling
compartment.
!
GENERAL
APPLICATION AND OPERATIVE RANGE
The coolbox contains compartments with different temperature
zones. The values for inside temperature are related to the
middle of the box. Your cooler is designed to refrigerate or
freeze food. The unit may also be used for remote purposes. If
you wish to refrigerate medicines, first check if the refrigerator’s
cooling capacity meets the demands of the respective
medicines. The refrigerator is designed to operate in ambient
temperatures between 14°—120°F in a maximum air humidity
of 90%. The refrigerator can operate continuously at an angle of
30° maximum. All materials which have been used in the
manufacture of these appliances are generally recognized as fit
for purpose. The refrigerant charge used in the cooling circuit is
CFC-free.
INSTALLATION
After unpacking the device check that no parts are missing or
the device has not been damaged. Place the cooling device in a
dry place that is protected against splashing water. Devices
equipped with a AC power pack must not be exposed to wet
conditions. Assure that the appliance does not get wet. These
units consist of two connections: for the (1) 12/24V DC and
(2) 110/240V AC.
The unit should not be placed directly adjacent to sources of heat
such as heating, gas ovens, hot water, pipes or under the
blazing sun. The cooling unit must be installed in such a way that
the air warmed up through the condenser can escape without
problems.
BATTERY OPERATION
Your cooling device can be operated with 12V or 24V direct volt-
age. Prior to connection, check whether the voltage indication
on the type plate is in accordance with the battery voltage.
Connect your cooling device as directly as possible to the poles
of the battery or to a plug connection with at least 15 A fuse.
Pay attention that the plus-wire is connected on to the positive
pole and the minus-one to the negative pole. In order to avoid
loss of voltage and thus decrease of performance, the cable
should be as short as possible and not interrupted. For this
reason, avoid additional switches plugs or feeder boxes.
A fuse is located in the plug of the power cord.
If the connecting cable is too short or does not adhere to require-
ments of your model, you will need to purchase a
suitable cable or an extension from a WAECO specialized dealer.
Determine the required wire gauge by means of the following
outline.
WAECOUSA • CF SERIES MANUAL 3
NOTE: High-speed battery charges may only be connected
to the battery after the cooling device and all other
consumables have been disconnected from the battery.
NOTE: Over-voltage may cause damage to the electronics
of the unit.
The appliance consumes a small amount of idle current. Always
disconnect it from the energy source when not in use. Your
cooling device is equipped with a reverse polarity protection. It
protects your cooling device against reverse polarity and against
a short circuit. As a protection for your battery, the cooling device
switches off automatically if the voltage is not sufficient. You
will find the cut-out/cut-in voltages in the technical data.
OPERATION FROM HOUSEHOLD CURRENT: AC
CF-18, 25:
If you prefer to operate your CF unit from 110V AC household
current, please use a WAECO AC adapter: MPS-50.
CF-35, 40, 50, 80, 110:
Your refrigerator/freezer is equipped with an integrated
multi-voltage power supply (110-240V) and can be connected
directly to alternating current. The integrated power supply is
equipped with an automatic switchover to AC operation when
the unit is connected to household current—although the DC
cable is still connected. That is why the socket should be
installed close to the unit and be easily accessible. After the
security device is active, parts of the equipment still may be
under voltage. During the switching process the red LED might
blink for a few minutes.
ATTENTION, DANGER!: Never manipulate plugs or switches
with wet hands or when your feet are in contact with
water! If you operate your cooling device on board a boat
by means of shore connection to 110V, it will require the
installation of an AC outlet if not already available.
CLEANING
Your cooling device will be delivered clean from the factory—but
nonetheless you should clean prior to initial use. Take a cloth
which has been slightly moistened with lukewarm water. Pay
attention that no water falls into the seals and possibly damages
the electronics. Dry off the cooling device with cloth after
cleaning. Clean the device periodically or as soon as it is dirty.
ATTENTION: Never use solvents or agents with sand or acid
for cleaning the liner. Never use brushes, hard or sharp
tools.
TURNING ON THE UNIT
Switch on the coolbox by pressing the “ON” button or pushing
the slide switch to “high” for operation at a starter battery (or to
“low” for the operation at a server battery). The LED near the
switch “ON” button is a flashing light and flashes only if the
battery power is insufficient for supply of the coolbox. If this is
the case, check your battery.
TURNING OFF THE UNIT
If you wish to turn off the cooling device for a longer period,
remove the plug from the AC line or disconnect the cooling
device cable from the battery. Clean the cooling device and leave
the lid slightly open. The opened lid will prevent the formation
of mold.
DEFROSTING
Air humidity can deposit on the evaporator or in the interior of
the cooling device as frost thus reducing the refrigerating per-
formance. Do not use hard or sharp tools to remove the frost.
Doing so may damage the plastic or evaporator.
Allow ample time to defrost the unit. Take out the refrigerate
products and store them in another cooling device so that they
remain refrigerated. Switch off the unit and leave the lid open.
Wipe any condensed water or empty the drip basin.
CHANGING THE LIGHT BULB
In case your coolbox is equipped with an interior light, the
light bulb may be exchanged.
The transparent part of the lamp separates from the housing.
Gently pry the transparent light cover off to expose the light
bulb. Now you can exchange the bulb and put the lamp back
into the housing.
TIPS FOR ENERGY SAVING
• Mount the refrigerator in a cool, dry place away from direct
sunlight.
• Always allow food to cool before storing in the refrigerator.
• Defrost your refrigerator periodically or when the liner
is covered with thick layer of ice.
• Do not set the thermostat colder than the required
temperature.
• Do not leave the lid or the door open any longer
than necessary.
• Always ensure that the compressor and condenser
are in a well ventilated area.
STANDARDS, DIRECTIVES
These appliances meet the following directives.
72/23/EEG - Low Voltage Directive
89/336/EEG - EMU directive
95/54/EEG
CF Series with automatic
AC/DC operation are UL listed.
!
!
!
!
®

Produktspezifikationen

Marke: Waeco
Kategorie: Kühlen, Gefrieren
Modell: Coolmatic CF

Brauchst du Hilfe?

Wenn Sie Hilfe mit Waeco Coolmatic CF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Kühlen, Gefrieren Waeco

Waeco

Waeco Coolmatic CF Bedienungsanleitung

20 August 2024
Waeco

Waeco CF-18 CoolFreeze Bedienungsanleitung

12 August 2024

Bedienungsanleitung Kühlen, Gefrieren

Neueste Bedienungsanleitung für -Kategorien-

Marynen

Marynen cm 2684 dt Bedienungsanleitung

5 Oktober 2024
Marynen

Marynen CM 1700 TC Bedienungsanleitung

5 Oktober 2024
Marynen

Marynen cm 1894 t Bedienungsanleitung

5 Oktober 2024
Marynen

Marynen cm 2826 dt Bedienungsanleitung

5 Oktober 2024
Marynen

Marynen CM 1040T Bedienungsanleitung

5 Oktober 2024
Marynen

Marynen CM 2890F Bedienungsanleitung

5 Oktober 2024
Marynen

Marynen cm 2063 dbs Bedienungsanleitung

5 Oktober 2024
Marynen

Marynen cm 2330 dt Bedienungsanleitung

5 Oktober 2024
Techwood

Techwood KS 8121 AG Bedienungsanleitung

5 Oktober 2024
Koenic

Koenic KFZ 531 E NF Bedienungsanleitung

27 September 2024