Vupoint Solutions PDS-ST510-VP Bedienungsanleitung

Vupoint Solutions Scanner PDS-ST510-VP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vupoint Solutions PDS-ST510-VP (2 Seiten) in der Kategorie Scanner. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
PDS-ST510- Manual VP
1. Key features
600/300 dpi resolution scan selection
Direct save JPEG le to microSD/microSDHC card ly
Support microSD/micro card up to 32GB SDHC
Driver free to download for Windows ® XP, Windows® Vista™,
WindowsÂŽ 7 and Mac OSÂŽ 10.4 or above
(direct plug-in, driver installation not required)
2. Functional parts
Part
Function
1
Resolution
Select High(600dpi) / Low(300dpi) resolution;
High / Low resolution mode icon will be displayed on
status LCD screen.
2
Stitch le
Create new folder for le storage.
3
Power button
Power On/ : Switch this key left or right to turn Off
scanner on or o.
4
Scan
In power on mode, press this button to start scanning,
press this button again to stop scanning
5
Scan LED indicator
Ready for scan: Green LED on
6
Error LED indicator
Over speed: Red LED on
7
LCD screen
Scanning status display
8
SF LED indicator
Stitch le: White LED on
9
Battery door
For 4.2V batteryrechargeable
10
micro SD card slot
microSD/micro card storage location. SDHC
11
USB interface
Download photo to a computer via USB cable provided.
12
Time set
Press to enter Time and Date setting mode
13
Format button
Press this button to format the microSD/SDHC card.
3. Explanation of the status icons
Item
Function
Description
1
SD card indicator
Photos will be stored in microSD card
2
Battery indicator
Battery is full Empty battery
3
Counting indicator
Show scanned les in microSD card
4
Selected resolution
High:600 dpi / Low:300 dpi
4. Using the scanner
4 Installing the battery .1
1. Open the battery door by sliding the battery compartment downwards as indicated by
the arrow in the diagram below.
2. Make sure battery is in the battery compartment. If not, insert rechargeable lithium 4.2V
polymer into compartmen battery t.
3. Turn on the scanner by switching the [POWER] button left.
4.2 Inserting a microSD memory card (not included)
To operate the scanner, you must insert a microSD Card (not supplied) to record and store your
pictures. Inserting the microSD memory card:
1. Turn OFF the scanner.
2. Insert the microSD card into the microSD card slot (with metal side facing up ). wards
Gently press in until card is latched.
Note: Do not force the card into the slot; forcing may damage scanner and the microSD memory
card. Align mic and try again. roSD card position (as marked)
4 me setting.3 Ti
1. [T S ] button to enter time setting mode by using a thin, blunt object, such Press IME ET
as a paperclip to access the button. The LCD screen will read for the year“1##” . “##” is
a set of number that would be changed to correspond to the actual time/date setting.
2. P the [STITCH FILE [DPI] buttons to select the current Year. ress ] or
3. [ ] button to conrm setting Press SCAN . The LCD screen will now read “2##.”
4. epeat steps 2 and 3 to select the Month, Date, Hour, and Minute. R
Indicator
1##
2##
3##
4##
5##
5 setting the ess the [ button again to complete the Time After Minute, “5##”, pr TIME SET]
and Date setting.
4.4 Formatting the microSD memory card
Note: ed but not necessary. All contents on the microSD Formatting the microSD is recommend
card will be erased during formatting.
1. Insert a micro with metal side facing up . Then power on SD card into the scanner wards
the scanner.
2. Press the [FORMAT] button with a thin, blunt object, such as the end of a paperclip to
access the button. An “F” shows on the LCD screen.
3. Press the button once to begin formatting microSD card. [SCAN]
4. The micro the formatting process is complete. SD card indicator will blink until
4.5 Calibrating your scanner
Note: Perform calibration only when white balance needs adjustment.
1. Turn on the scanner by sliding the [POWER] button to ON. Then place the scanner on
the provided “White Balance Calibration” paper.
2. Click and hold onto the [STITCH FILE] button. While holding onto the [STITCH FILE]
button, press the [SCAN] button once and then release both bottons. SD symbol will
as h and “GREEN” and “RED” LED light will turn on.
3. Do not move the scanner. Wait until the “RED” LED light turns off. “GREEN” LED light
will stay on.
4. With only the “GREEN” LED light on, start scanning the white paper by sliding the
scanner across the paper until the “GREEN” LED light turns off. (Slide the scanner
backwards if necessary).
5. Slide the [POWER] button to OFF to turn o the scanner. Calibration is complete.
4.6 Setting the resolution
1. choose between high By pressing the [DPI] resolution button on the scanner, you may
resolution (600 dpi) and low resolution (300 dpi).
2. The high or low resolution mode will be displayed on the LCD screen to reect your
choice.
4.7 Stitch le
To group scanned les into a new folder within the microSD card use the Stitch le function.
1. a Press the [STITCH FILE] button to create new folder within the microSD card for les
storage. SF white LED light will turn on.
2. Then scan your documents. Your les will be saved into the new folder.
3. cans in another folder, press the [STITCH FILE] button To save another new set of s
again to generate a new folder.
For free optional stitching software e program , please download th from the following link:
http://research.microsoft.com/en-us/um/redmond/groups/ivm/ice/
4.8 How to scan
Note: To scan, make sure your scanner is not connected to the computer.
1. Turn on the scanner by sliding the [POWER] button to ON.
2. Place the document on a at surface and hold down the document with one hand.
3. Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto the
paper to ensure the most of the document can be scanned. Make sure to keep the
scanning area in between the scanning width indicator marked on the side of the
scanner.
4. Hold the scanner at against the material and then press the [SCAN] button once.
5. Slide the scanner slowly, keeping you hand stable to get the best quality picture.
6. Press the [SCAN] button again to stop scanning.
5. LED light indications
“GREEN” SCAN LED ON Scan in progress.
“GREEN” SCAN LED OFF Standby / Scan is complete.
----------------------------------------------------------------------------------------------------
“RED” ERROR LED ON Scanning too fast.
May cause scanning error.
Restart and scan again.
“RED” ERROR LED OFF No error in scanning speed.
Continue scanning process.
---------------------------------------------------------------------------------------------------------------------
“WHITE” SF LED ON/OFF A new folder created.
Scan will START when button is pressed
To END scan, press button again
6. Viewing your scans
1. our scanner to your computer and then turn on your scanner. Connect y
2. Your computer should recognize the scanner as a “Removable Disk.” Click “Open folder
to view files” to view and import scans.
NOTE: If the Removable Device window did not launch automatically, go to your “My Computer” (PC)
and nd the device under Removable Storage.
NOTE: In power o mode, connect your scanner to your computer charg the battery. OR use the to e
power adapter that is included.
7. Specications
Image sensor
Color Contact Image Sensor
Number of sensor
6048 dots
Resolution
Low resolution : 300x300 dpi(default)
High resolution: 600x600 dpi
Maximum scanning
speed for A5 size
document
Color High resolution: 6 Seconds
Color Low resolution: 5 Seconds
Capacity (Based on 1GB microSD
card. Scan A5 size le, the quantity
of scans varies depending on the
content complexity)
600dpi color: Photos(Min.) 550
300dpi color: Photos(Min.) 1200
Scan width
Approx. 5”
Scan length
300DPI: 53"(Max), 600DPI: 26"(Max)
File format
JPEG
LCD
Scanning status display
Auto Power O
3 Minutes
USB Port
USB 2.0 high speed
External memory
microSD Card
Standard Battery
4.2V Rechargeable Lithium Polymer battery
8. Computer system minimum requirement
Operating System
Windows® XP, Windows® Vista™, Windows® 7 and
Mac OSÂŽ 10.4 or above
(direct plug-in, driver installation not required)
CPU
Pentium I or above II
RAM
At least 256MB
Interface
USB port
9. Troubleshooting
Problem
Cause
Solution
Cannot turn on the
scanner
1. Low battery .
2. Battery not inserted
properly
1. Recharge the battery by
connecting scanner to the
computer via USB cable.
2. Replace or install the
battery correctly
Pictures cannot be
saved when you are
scanning them
1. microSD card has not
been install correctly. ed
2. Memory is full
3. The microSD card has
not been formatted
properly
1. Install microSD card with
metal side facing upwards.
2. Download the pictures from
the scanner to the computer
to create storage space
3. Format your microSD card.
Refer 4 to section 4.
Computer does not
recognize your scanner
when connected. (You
cannot nd removable
disk)
Connection failure.
1. Make sure all cable
connections are secured.
Restart the computer if
necessary
2. Try a different USB port.
The battery life is
very short
Use wrong type of battery
Replace with new
4.2V batteryrechargeable
Blurry images
The lens of the scanner is
dirty.
1. Clean the lens with soft
dry cloth
2. Recalibrate the scanner.
Refer to section 4.5
ERR. LED is on when
scanning a document
Scanning speed is too fast
Press the [SCAN] button to
reset and -scanning the try re
document more slowly
ERR. LED is on after
powering on the scanner
The calibration data is
reset.
Recalibrate the scanner.
Refer to section 4.5
10. ABBYYÂŽ OCR Software
(Optional, not required to install to operate scanner)
Compatible with Windows® XP, Windows® Vista™, Windows® 7
To access the software User’s Manual go to the Help menu for instructions on how
to use the OCR software application:
1. Load and open the ABBYY software.
2. Press the “F1” key located on your keyboard to launch the “Help” menu from the
software.
3. OR, locate the ABBYY icon found next to the Time indicator on your computer’s
taskbar and then right click on the icon to access the “Help” menu.
FCC (Federal Communications Commission)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Windows® XP, Windows® Vista™, Windows® 7 are registered trademarks of Microsoft Corporation.
Mac OSÂŽ 10.4 is a registered trademark of Apple Inc. ABBYYÂŽ is a registered trademark of ABBYY Software Ltd.
microSD and microSDHC logo is a trademark of SD-3D, LLC.
All trademarks are the property of their respective owner.
PDS ST510- -VP_Manual_11- 0223
AM- - -VPS-2N510 GB


Produktspezifikationen

Marke: Vupoint Solutions
Kategorie: Scanner
Modell: PDS-ST510-VP

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vupoint Solutions PDS-ST510-VP benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Scanner Vupoint Solutions

Bedienungsanleitung Scanner

Neueste Bedienungsanleitung fĂźr -Kategorien-