Vivotek AM-312 Bedienungsanleitung

Vivotek Überwachungskamera AM-312

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vivotek AM-312 (2 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Compatible VIVOTEK CamerasI
Compatible brackets Supported Cameras
AM-714 IB836BA-EHF3/EHT/HF3/HT, IB8382-EF3/ET/F3/T, IB9371-EHT/HT, IB9381-EHT/HT
AM-719 IB836BA-EHF3/EHT/HF3/HT, IB8382-EF3/ET/F3/T, IB9371-EHT/HT, IB9381-EHT/HT,
IB9365-EHT/HT, IB9367-EHT/HT/H, IB8377-EHT/HT
AM-218 (via AM-714/
AM-719)
Please refer to AM-218, AM-520, and AM-525 documents.
Directly attached Supported Cameras
* IB836BA-EHF3/EHT/HF3/HT, IB8382-EF3/ET/F3/T, IB9371-EHT/HT, IB9381-EHT/HT,
IB9365-EHT/HT, IB9367-EHT/HT/H, IB8377-EHT/HT, IB8367A, IB8369A, IB8377-H,
IB8379-H, MS8391-EV, MS9390-HV, IB9367-EHT-v2
* The directly-attached conguration is less recommended for the lack of waterproof and cabling
protection. If directly attached, you should properly wrap the rear-end cables and connectors with
waterproof protection such as putties.
Revision History:
Rev. 1.0: Initial release; Rev. 1.1: Added mounting holes for IB8367A, IB8369A, IB8377, and IB8379.
Rev. 1.2: Added MS9390-HV as the supported model. Rev. 1.3: Added IB9367-EHT-v2 as the supported model.
Corresponding ordering part numbers:
AM-312: 900034801G, AM-714: 100134800G
AM-218: 100146100G AM-719: 100184500G
VIVOTEK Mounting Accessories
AM-312 Pole mount
Installation Guide
Package Contents
Items 1. Pole mount bracket, 2. Stainless strap x2, 3. M6X20mm screws x4. 4. M5X20mm
screws x4, 5. Hex L wrench 5mm x1, 6. Hex L wrench 4mm x1, 7. M4x15 screws x4.
AM-312 Pole mount bracket
Mechanical DrawingsII
173,79
170
45
4- 6
102
2
55°
55°
70,05
86
4- 7
84,9
86
99
56,29
48,75
3- 4,5
68,75
4-OB 25.5X5.5mm
M6X20 X4
5mm X1
M5X20 X4
4mm X1
Stainless steeel strap X2
M4X15 X4
AM-312 Applications
Bullet camera
AM-312
AM-218
AM-714 / AM-719
Dome camera
AM-520 / AM-525, etc.
AM-312
AM-714 / AM-719
Installation
III
Below is a general, sample procedure using a Pole mount bracket:
1. Pass the stainless steel straps through the bracket and around the pole.
2. Tighten the straps using a pincer plier and a at blade screwdriver.
3. The 4 screw holes in the center are used for directly mounting the IB series bullet cameras.
The 4 screw holes at the edges are used for mounting the AM-714 conduit box.
For M6 socket screws
- for IB series bullet cameras
directly attached
Also applies to MS9390 using
the M4 screws
The pole mount bracket is designed to
accommodate a pole in a diameter ranging
from 90 ~ 152mm (3.5 ~ 6 inches)
• Make sure you have purchased the adequate accessories to be combined for your installation.
• Please do not install an indoor camera in an outdoor environment! Doing so will void our
warranty. This is determined by whether the camera housing is weather-proof.
• Direct sunlight can tremendously increase the temperature within the device.
Installation Torque:
35 lb-in(40kg-cm)
For M5 socket screws
- for AM-714/AM-719
conduit box
4. Secure the AM-714 / AM-719 conduit box to bracket using the M5 screws, washers, and hex heads. A hex
crescent wrench is required.
If you are installing a bullet camera directly to the bracket, use the M6 screws in the center. A hex crescent
wrench is required.
5. For the rest of the installation procedure, refer to the documentation that came with the AM-714, AM-719, AM-
218, and the other accessories.
The 3/4" cable glands and conduts for protecting cables are user-supplied.
Rev. 1.3
The 3 screw holes in the center are used for mounting
the IB8367A, IB8369A, IB8377-H, IB8379-H bullet
cameras.
For M4 screws
- for IB8367A, IB8369A
IB8377-H, IB8379-H
The installation of IB8367A, IB8369A, IB8377, and IB8379 is similar to the above, except using di󰀨erent
mounting holes and screws.
Below are the corresponding mount holes for the
MS9390-HV.
For the IB9367-EHT-v2, secure the adapter plate to the bracket using M6 x 20 socket screws. Tighten the hex
nuts to secure from the other side.
T20 anti-tamper
M4 x 18

Produktspezifikationen

Marke: Vivotek
Kategorie: Überwachungskamera
Modell: AM-312

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vivotek AM-312 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera Vivotek

Vivotek

Vivotek FE8171V Supreme Bedienungsanleitung

27 August 2024
Vivotek

Vivotek MD7530 Dome Bedienungsanleitung

27 August 2024
Vivotek

Vivotek IP8362 Supreme Bedienungsanleitung

27 August 2024
Vivotek

Vivotek NR8401 NVR Bedienungsanleitung

27 August 2024
Vivotek

Vivotek ST2403 Software Bedienungsanleitung

27 August 2024
Vivotek

Vivotek PZ8111W PTZ Bedienungsanleitung

27 August 2024
Vivotek

Vivotek ST3402 Bedienungsanleitung

27 August 2024
Vivotek

Vivotek SD8363E Supreme Bedienungsanleitung

27 August 2024
Vivotek

Vivotek RX7101 NVR Bedienungsanleitung

27 August 2024
Vivotek

Vivotek IP8162 Supreme Bedienungsanleitung

27 August 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024