Vitek VTM-142C Bedienungsanleitung

Vitek Nicht kategorisiert VTM-142C

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Vitek VTM-142C (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
8
9970 GLENOAKS BLVD. UNIT B SUN VALLEY, CA 91352
PHONE: 888-VITEK-70 / 818-771-0300 FAX: 818-771-0400
WWW.VITEKCCTV.COM | SALES@VITEKCCTV.COM
LIMITED LIABILITY WARRANTY
VITEK products carry a two (2) year limited warranty FOB VITEK warehouse,
except for monitor CRTs which carry a ninety (90) day warranty due to potential
misuse of contrast controls. The analog video recorders (vcrs) carry a one (1)
year warranty and our Digital products are also warranted for 2 years except for
the hard drives which carry their own factory warranty. VITEK warrants to the
purchaser that products manufactured by VITEK are free of any rightful claim of
infringement or the like, and when used in the manner intended, will be free of
defects in materials and workmanship for a period of two (2) years, or as
otherwise stated above, from the date of purchase.
VITEKS obligation under this warranty shall be limited to the repair, including all
necessary parts and cost of labor connected therewith, or at its option, the
exchange or a credit issued towards the purchase price of any video equipment
which shows evidence of a manufacturing defect within the warranty period.
Replacement parts furnished in connection with this warranty shall be warranted
for a period equal to the UN-expired portion of the original equipment warranty.
This warranty shall not apply to repairs or replacements necessitated by any
cause beyond the control of VITEK, including but not limited to, acts of nature,
improper installation, misuse, lack of proper maintenance, accident, voltage
fluctuations, and unauthorized repairs or modifications. This warranty becomes
VOID in the event serial numbers are altered, defaced, or removed. Shipping
charges, if any, must be prepaid. A copy of the bill of sale (or invoice of
purchase), together with a complete explanation of the problem must accompany
all returns.
A return authorization number or ìRAî number must be obtained prior to the
return of any item for repair, replacement, or credit. VITEK requires that this ìRAî
number be printed clearly on the outside of the shipping carton to avoid refusal
of said shipment. The Return Authorization number expires after 30 days.
Products returned after (30) days are subject to refusal of returned merchandise.
BLACK
VITEK
VTM-142C
14” Color Monitor With
420 TVL & Audio
420 TV Lines At Center on a 14” Diagonal Screen
Attractive Black Metal Cabinet
Digital Front Panel Controls For: Sharp / Bright / Tint /
Color / Contrast & Volume / A/B Switching
Front Panel A/B Switch
2 Looping Video Inputs & Dual Audio In / Out
Rack Kit Available: VI-141CRM
•
•
•
•
•
•
2
1) Read Instructions
All the safety and operating instructions should be
read before the appliance is operated.
2) Retain Instructions
The safety and operating instructions should be
retained for future reference.
3) Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
4) Follow Instructions
All operating and use instructions should be followed.
5) Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning the unit.
Exception: A product that is meant for uninterrupted
service and that for some specific reason, such as the
possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by
the user for cleaning or any other purpose, may
exclude the reference to unplugging the product in the
cleaning description otherwise required in 5).
6) Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7) Water and Moisture
Do not use this product near water, for example near
a bath tub, wash bowl, kitchen sink, or laundry tube in
a wet basement or near a swimming pool and the like.
8) Accessories
Do not place this product on an unstable cart, stand,
tripod, bracket or table. The product may fall, causing
serious injury to a child or adult, and serious damage
to the product. Use only with a cart, stand, tripod,
bracket or table recommended by the manufacturer, or
sold with the product. Any mounting of the product
should follow the manufacturer’s instructions, and
should use a mounting accessory recommended by
the manufacturer.
9) An product and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination
to overturn.
10) Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating and these
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
11) Power Sources
This product should be operated only from the type of
power resource indicated on the marking label. If you
are not sure of the type of power supply to your home,
consult your appliance dealer or local power company.
For products intended to operate from battery power
or other sources, refer to the operating instructions.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER, NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference with radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference with radio or television reception, which
can be determined by turning the equipment off and on, the user should correct the interference by taking one or
more of the following actions:
- Re-orient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced Radio/TV technician for help.
The user may find the following booklet prepared by the Federal Communications Commission helpful:
HOW TO IDENTIFY AND RESOLVE RADIO-TV INTERFERENCE PROBLEMS.
This booklet is available from the US Government Printing Office, Washington, DC 20402, Stock Number 004-
000-00345-4
BLACK
3
12) Grounding or Polarization
This product is equipped with a three-wire grounding-
type plug a plug having a third (grounding) pin. This
plug will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose
of the grounding-type plug.
13) Power-Cord Protection
Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them paying particular attention to
cords at plugs, convenience receptacles, and the
point where they exit from the product.
14) Protective Attachment Plug
The product is equipped with an attachment plug
having overload protection. This is a safety feature.
See instruction Manual for replacement or resetting of
protective device. If replacement of the plug is
required, be sure the service technician has used a
replacement plug specified by the manufacturer that
has the same overload protection as the original plug.
15) Outdoor Antenna Grounding
If an outside antenna or cable system is connected to
the product, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810
of the National Electrical Code. ANSI/NFPA 70,
provides information with regard to proper grounding
of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrodes. See Figure
1-1.
16) Lightning
For added protection for this product during a lightning
storm, or when it is left unattended and unused for
long periods of time, unplug the product from the wall
outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to
lightning and power line surges.
17) Power Lines
An outside antenna should not be located in the
vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with
them may be fatal.
18) Overloading
Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in
a risk of fire or electric shock.
19) Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the receiver.
20) Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous volt-age or other hazards. Refer all
servicing to qualified service personnel.
21) Damage Requiring Service
Unplug the product from the wall outlet and refer
service opening to qualified service personnel under
the following conditions:
a) when the power-supply cord or plug is damaged,
b) if liquid has been spilled, or objects have fallen into
the product,
c) if the product has been exposed to rain or water.
d) if the product does not operate normally by
following the operating instructions. Adjust only the
controls that are covered by the operating instructions
as an improper adjustment of other controls may
result in dam-age and will often require extensive
work by a qualified technician to restore the video
product to its nor-mal operation.
e) If the product has been dropped or damaged in
any way, and
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
22) Replacement Parts
When replacements parts are required, be sure the
service technician has used replacements parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may results in fire, electric shock or other
hazards.
23) Safety Check
Upon completion of any service or repairs to this
receiver, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
24) Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
25) Heat
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
4
VIDEO INPUT
The Video button changes to A and B and it changes input mode. The input turns on
LED.
SHARP
The Sharp button controls the frame of the screen. Select the Sharp button to control
the frame of the screen with the Volume (Data) button. (50 is the normal size)
BRIGHT
The Bright button controls the brightness of the screen. Select the Bright button to
control the brightness of the screen with the Volume (Data) button. (50 is the normal
brightness)
TINT
The Tint button controls colors close to the natural one. To get the most optimal color,
target one of the skin colors and change it close to the primary color. Select the Tint
button to control colors with the Volume (Data) button. (50 is the normal color)
COLOR
The Color button controls the density of the colors. Select the Color button to control the
density of colors with the Volume (Data) button. (50 is the normal density)
CONTRAST
The Contrast button controls the light and shade between brightness and darkness.
Select the Contrast button to control the brightness with the Volume (Data) button. (100
is the normal contrast)
VOLUME (DATA ADJUST)
The Volume button has two functions. Controlling volume: This button controls the
volume of the sound without pressing other buttons
POWER
This button is to turn on and off the Monitor. The Power button connects to the
electricity and the LED is turned on.
1
2
3
4
5
6
7
8
FRONT PANEL CONTROLS
B
B
B
B
BBL
L
L
L
LLA
A
A
A
AAC
C
C
C
CCK
K
K
K
KK
5
REAR PANEL CONNECTIONS
VIDEO INPUT/OUTPUT Connectors
Video input/output connectors are for video signals.
Video A and B are input/output connectors for composite signal.
AUDIO INPUT/OUTPUT Connectors
Audio in/output connectors are for audio signals.
Audio A is selected with Video A, and Audio B is selected with Video B.
After installing a camera, use a cable to connect the video/audio output connectors of the
camera to the each “A” video/audio input connector on the back of the monitor.
Use a cable to connect the video/audio input connectors of the VCR to the each “A”
video/audio output connector of the monitor.
It is same for connecting to the “B” output connectors. You can connect a monitor instead
of VCR.
To compose Video and Audio, connect Video A to Audio A and connect Video B to Audio B.
(See page 4)

Produktspezifikationen

Marke: Vitek
Kategorie: Nicht kategorisiert
Modell: VTM-142C

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vitek VTM-142C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Vitek

Vitek

Vitek VT-TPTZ10HR-2T Bedienungsanleitung

7 Oktober 2024
Vitek

Vitek VTM-LCD155P Bedienungsanleitung

7 Oktober 2024
Vitek

Vitek VTC-T4T3HR2MD Bedienungsanleitung

6 Oktober 2024
Vitek

Vitek VT-1205A-D4B Bedienungsanleitung

17 September 2024
Vitek

Vitek VTD-VH412VP4 Bedienungsanleitung

13 September 2024
Vitek

Vitek VTD-THMD2RF-2 Bedienungsanleitung

9 September 2024
Vitek

Vitek VTC-C960WS Bedienungsanleitung

9 September 2024
Vitek

Vitek VTD-TND4RFS Bedienungsanleitung

8 September 2024
Vitek

Vitek VT-EH4 Bedienungsanleitung

5 September 2024
Vitek

Vitek VT-EH8 Bedienungsanleitung

4 September 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024