Vitek VTD-TTAD30R2V Bedienungsanleitung

Vitek Nicht kategorisiert VTD-TTAD30R2V

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Vitek VTD-TTAD30R2V (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
VITEK
VITEK
FEATURES
• 1/3” 2.1 MegaPixel CMOS Sensor
• HD-TVI & AHD/CVBS Video Output
• 3.6mm Fixed Iris Lens (VTD-TTAD24R2F) / 2.8~12mm
Varifocal Lens (VTD-TTAD30R2V)
• 24 Infrared LED’s with 70’ IR Range (VTD-TTAD24R2F) /
30 Infrared LED’s with 100’ IR Range (VTD-TTAD30R2V)
• Digital Wide Dynamic Range (D-WDR)
• True Mechanical Day/Night function by ICR
• 3D-DNR Noise Reduction
• IP66 Weather Resistance
• Supports Up The COAX Control
• Over 1500’ HD Video Transmission (Depending on cable
characteristics and integrity)
• 12VDC Operation
VTD-TTAD24R2F
VTD-TTAD30R2V
2.1 Megapixel Outdoor HD-TVI/
AHD/CVBS IR Dome Cameras
2
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source..
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
3
7
8
9
10
1
2
Components and Accessories
Overview
Camera
User Manual
Drill Template
Screws
Hex Wrench
Lower Dome
Lens
HD-TVI Output
AHD/CVBS Output
Power Cable
Focus
Zoom
Lock Screw
1
2
3
4
5
6
7
8
3
4
5
6


Produktspezifikationen

Marke: Vitek
Kategorie: Nicht kategorisiert
Modell: VTD-TTAD30R2V

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vitek VTD-TTAD30R2V benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Vitek

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-