Vitek VTD-TND24R4F2 Bedienungsanleitung

Vitek Nicht kategorisiert VTD-TND24R4F2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vitek VTD-TND24R4F2 (48 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/48
VITEK
VITEK
FEATURES
• 3, 4, or 5 Megapixel Progressive Scan CMOS image sensors
• Up to 30fps live viewing
• Fixed, Varifocal, and Motorized Lens
• Infrared LED’s with up to 150’ IR Range
• Optional Advanced Starlight Technology Offers Dramatically Higher
Sensitivity to Light Producing Color Images in Very Dark & Night
Scenes (5 MegaPixel Versions)
• Digital Wide Dynamic Range (D-WDR)
• True Mechanical Day/Night function by ICR
• XD-DNR (2D-DNR & 3D-DNR) Noise Reduction
• On Board Motion Detection
• H.265/H.264/MJPEG Triple Streaming
• Secondary Video Output (CVBS)
• Remote Viewing via CMS, Internet Explorer, and iOS & Android
Apps
• Minimal Latency with up to 10 simultaneous user connections
• IP66 Weather Resistance
• MicroSD memory card slot for Local recording supporting up to
128GB MicroSDXC cards (Select Models)
• ONVIF Compliant
• Optional Mounts Available
• 12VDC & PoE (Power over Ethernet) Operation
IP Camera Series
Transcendent Series 3, 4, and 5
Megapixel H.265 WDR IP Cameras
with IR LED Illumination
PLEASE NOTE:
Documentation, Software, Tools, and Updates are available online.
Scan the QR Code or visit:
http://www.vitekcctv.com/Downloads
2
Please read this manual carefully for correct use of the product.
Notes
! Please use the specified power supply to connect.
! Do not attempt to disassemble the camera; in order to prevent electric
shock, do not remove screws or covers.
! -There are no user serviceable parts inside. Please contact the nearest
service center as soon as possible if there is any failure.
! Avoid incorrect operation, shock vibration, heavy loads which can cause
damage to the camera.
! Do not use corrosive detergent to clean body of the camera. If
necessary, please use soft dry cloth to wipe dirt; for hard contamination,
use neutral detergent. Any cleanser for high grade furniture is
applicable.
! Avoid aiming the camera directly towards extremely bright objects, such
as the sun, this may damage the image sensor.
! Please follow the instructions to install the camera.
! Do not operate it incase temperature; humidity and power supply are
beyond the limited stipulations.
! Keep away from heat sources such as radiators, heat registers, stove,
etc.
! Do not expose the product to the direct airflow from an air conditioner.
! We may reserve the rights to amend typographical errors,
inconsistencies with the latest version, software upgrades and product
improvements, interpretation and modification. These changes will be
published in the latest version without special notification.
! The pictures and screenshots in this manual are only used to explain
the usage of our product. The ownerships of trademarks, logos and
other intellectual properties related to Microsoft, Apple and Google
belong to the above-mentioned companies.
! This manual is suitable for IR weather-proof network camera. All
pictures and examples used in the manual are for reference only. .
3
Table of Contents
1 IE Remote Access.................................................................................... 4
1.1 ............................................................................... LAN 4
1.1.1 Access through IP-Tool ............................................ 4
1.1.2 Directly Access through IE ....................................... 6
1.2 WAN .............................................................................. 7
2 Remote Preview ....................................................................................... 8
2.1 The Remote Preview Interface .................................... 8
2.2 Record Playback ........................................................ 10
2.3 Snap Pictures .............................................................. 11
3 Remote Configuration ........................................................................... 12
3.1 ............................................... System Configuration 12
3.1.1 Basic Information .................................................... 12
3.1.2 Date & Time Configuration ..................................... 12
3.1.3 SD Card .................................................................. 13
3.2 .................................................. Video Configuration 13
3.2.1 Camera Configuration ............................................ 14
3.2.2 Video Stream .......................................................... 14
3.2.3 OSD Configuration ................................................. 16
3.2.4 Video Mask ............................................................. 16
3.2.5 ROI Configuration ................................................... 17
3.3 Alarm Configuration .................................................. 18
3.3.1 Motion Detection Area ............................................ 18
3.3.2 Motion Detection Trigger ........................................ 19
3.3.3 Motion Detection Schedule .................................... 20
3.3.4 Alarm Input Trigger ................................................. 21
3.3.5 Alarm Input Schedule ............................................. 21
3.3.6 Alarm Out ............................................................... 22
3.3.7 .......................................................... Alarm Server 22
3.4 Network Configuration .............................................. 22
3.4.1 Port ......................................................................... 22
3.4.2 IP Address .............................................................. 23
3.4.3 Server Configuration .............................................. 23
3.4.4 IP Notify .................................................................. 24
3.4.5 DDNS Configuration ............................................... 24
3.4.6 RTSP ...................................................................... 26
3.4.7 UPnP ...................................................................... 26
3.4.8 Mail Setting ............................................................. 26


Produktspezifikationen

Marke: Vitek
Kategorie: Nicht kategorisiert
Modell: VTD-TND24R4F2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vitek VTD-TND24R4F2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Vitek

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-