Vitek VTD-HOCMD2CH Bedienungsanleitung

Vitek Überwachungskamera VTD-HOCMD2CH

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vitek VTD-HOCMD2CH (4 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
VITEK
VTD-HOCMD2CH
HD-SDI Vandal Resistant
Mini Dome 2.1 Megapixel
FEATURES:
• 1/3” 2.1Megapixel CMOS Sensor
•1080(1920x1080)@30fps
• 3.6mm Fixed Lens Included
• 2D-DNR - Two Dimensional Motion Adaptive Noise
Reduction
• Can be Semi-Flush or Surface Mounted
• IP-66 Rated Weather Resistant Aluminum Enclosure w/
Polished Chrome Finish
• 12VDC Operation
1
INSTALLATION
1) Align the camera unit with the
surface of the ceiling, make marks
on the ceiling in the places where
the screw holes are to be drilled,
and then drill the three holes.
2) Cut a hole (diameter:50mm) in the
ceiling for routing the cables.
3) Pass the power cable (B) and video
cable (A) from the camera unit
through the cable hole in the ceiling.
4) Align the three screw holes in the
camera unit (C) with the screw holes
in the ceiling, and then secure the
camera in place by tightening the
three tapping screws.
5) Use the supplied four screws (E) to
secure the middle base (D) to the
bottom base (C)
6) Tighten the guide ring (G), then
adjustment the camera (F).
7) Attach the bubble (H) to the middle
base (D).
8) Attach the top cover (I) to the middle
base (D).
9) Use the supplied star-shaded
L-wrench to tighten the set screw on
the top cover.
Open Close
2
SPECIFICATIONS
Image Device
Resolution
Effective Pixels
Minimum Illumination
Included Lens
Day/Night
Noise Reduction
Synchronization
S/N Ratio
Video Output
Electronic Iris
Construction
Water Resistance
Power Source
Power Consumption
Operating condition
Dimensions
Weight
1/3” 2.1Megapixel CMOS
1920x1080p(1080p/30fps)
1944(H)x1092(V) (2,122,848 Pixels)
0.1LuX / F2.0
3.6mm Fixed Megapixel lens
Auto
2D-DNR
Internal
More than 50dB
VBS 1Vpp +/-10%, 75ohm
1/60 ~ 1/100,000sec
Aluminum Housing with Polished Chrome Finish
IP-66
12VDC
150mA
14F ~ 122F (-10C ~ +50C) / 95% RH Max
3.15” x 1.69”/2.47” (80mm x 42.8mm/62.8mm)
14.11 Oz. (400g)
SPECIFICATIONS VT-HOCMD2CH


Produktspezifikationen

Marke: Vitek
Kategorie: Überwachungskamera
Modell: VTD-HOCMD2CH

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vitek VTD-HOCMD2CH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Überwachungskamera Vitek

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-