Vitek VTC-C544 Bedienungsanleitung
Vitek
Not categorized
VTC-C544
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Vitek VTC-C544 (4 Seiten) in der Kategorie Not categorized. Dieser Bedienungsanleitung war fĂĽr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
1
VTC-C544
1/3" “DSP” Color CCD Camera
INSTRUCTION MANUAL
1 General
This color video camera employs a 1/3” SONY solid-state, charge coupled imaging
device, and is equipped with a newly developed DSP (Digital Signal Processor) for
video signal processing to provide high color fidelity and a sharp, stable picture.
2 Features
1. 380 lines of horizontal resolution and high quality video utilizing digital processing
2. 0.5lux Minimum illumination and signal- -to noise ratio of 48 dB is achieved by
employing a highly sensitive image sensor with micro lenses and low noise circuit
design.
3. High quality picture –A digital signal processor performs digital horizontal and
vertical aperture enhancement to produce high quality picture.
4. A newly developed intelligent wide range Auto Tracing White Balance (ATW) that
automatically adjusts the tone according to the color temperature of the light
source.
5. Smart digital control Auto BLC, the combination of Histogram equalizer and
Central windows weighting BLC functions ensure for use against any unusual
lighting conditions.
6. Advanced Auto Exposure System for both fixed iris and auto iris lenses controls
the amount of light to ensure optimum video signal.
7. Built- -in Line lock sync.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside.
Contact a qualified service person if necessary.
Warning:
To prevent fire or electric shock hazard, do not expose
the appliance to rain or moisture
2
3 Name of parts and functions
A. Power input block terminal
AC 24V model for external Vertical phase input as Line lock
B. Dip-switch
1.CCD IRIS (AES) / AUTO IRIS SW(DD Drive)
2.NORMAL / BACKLIGHT SW
3.ATW / FIX SW
4.Normal / Mirror SW
C. Video output terminal(BNC)
D. Holder screw hole
E. Flange focal lock screw
F. C (CS) mount adapter
If a CS mount lens is to be used, remove the C mount ring.
G. Auto iris lens connector(MINI JACK)
For use with auto iris lens without EE amp, set the lens selector switch to “DD”
position.
A
B
C
D
E
F
H
I
G
3
Note: This camera does not support “Video” Type auto iris lenses.
Connector cable leads
1. Damping coil (-) 3. Driving coil (+)
2. Damping coil (+) 4. Driving coil (-)
H. DC lever Adjuster (VR)
For DC drive auto iris lens driving level adjustment; in order to obtain
optimum exposure in varying lighting conditions.
I. Power pilot LED
4 Auto Tracing White Balance
4.1 ATW—Auto tracking white balance
This camera is equipped with an digital auto tracing white balance function,
This ensures white balance control based on the absolute color temperature of
the object and adjusts automatically.
Auto color temperature tracing white balance is a feedback system, that
aligns the white balance by detecting the R- -Y and B Y signal. After performing
white detection, the convergence shift processing is judged and accurately
operated by internal micro-controller.
The operating color temp. range is from 3200 °K to 7500°K approximately.
4.2 FIX—fixed white balance
Point the camera at a white object and bring it into focus. Move dip switch to
the FIX mode.
5 AE Mode
5.1 AES (CCD IRIS) mode
AES mode is performed by the CCD iris and AGC, the range of the electronic
shutter is from 1/50(1/60) to 1/100,00 second; the AGC range is from 0 to 36
dB.
5.2 Auto Iris DD Mode
In this mode, the shutter speed is fixed at 1/60 sec. NTSC. Auto exposure
operation is performed by AGC through the microcontroller and mechanical iris
of external lens. The back light compensation amount is calculated by internal
microcontroller, then output and supplied to the governor inside the auto iris
lens.
6 Auto Back-light Compensation
This auto BLC function consists of two methods of Backlight compensation; one is
Central Windows weighted average BLC, the other is Histogram calculating BLC.
Microprocessor (dip switch ON position)
The combination of two types of backlight compensation makes it easier to arrange
2
1
4
3
Produktspezifikationen
Marke: | Vitek |
Kategorie: | Not categorized |
Modell: | VTC-C544 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Vitek VTC-C544 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Not categorized Vitek
10 August 2024
Bedienungsanleitung Not categorized
- Not categorized Gigabyte
- Not categorized Audio-Technica
- Not categorized Tefal
- Not categorized Cuisinart
- Not categorized Shure
- Not categorized Arçelik
- Not categorized Icy Box
- Not categorized Musway
- Not categorized Stihl
- Not categorized Hager
- Not categorized Iiyama
- Not categorized Bestway
- Not categorized Shimano
- Not categorized Dormakaba
- Not categorized Playtive
- Not categorized Mean Well
- Not categorized Vimar
- Not categorized StarTech.com
- Not categorized Livarno Lux
- Not categorized Panduit
- Not categorized Fluance
- Not categorized Conair
- Not categorized Lincoln Electric
- Not categorized Cypress
Neueste Bedienungsanleitung fĂĽr -Kategorien-
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
20 August 2024
20 August 2024
20 August 2024
18 August 2024
17 August 2024