Vitek VT-PIRC2H Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Vitek VT-PIRC2H (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
VITEK
• 1/3” Sony High Density CCD (960H) with 700 TV Lines
• Minimum Illumination of 0.2 Lux / 0.1 Lux
• Pinhole 3.7mm / F2.0 Lens Included
• NC/N/NO Alarm Output
• Working 100’ Motion Detection Using 58 Beams Within 3
layers (35’ x 35’ Coverage Area)
VT-PIRC2/H
Color PIR Cameras
2
PIR BOARD LAYOUT
1. LED: When an intrusion is detected, the LED will activate.
2. JP1: Pulse count setting.
1-2 short: Relay will activate when an intrusion is detected once. (For stable
environments or high risk operating environments)
2-3 short: Relay will activate when an intrusion is detected twice within 15 seconds.
(For harsh environments)
3. JP2: Relay output select.
Short: For outer control used in area where DC12V is requested (Limited at 200mA).
Normal: N.C. = DC12V out
Activate: N.O. = DC12V out
Open: Normal relay connector (1.5A at DC24V/1.5A at AC120V/1A at AC240V)
Normal: C & N.C. short / C & N.O. open.
Activate: C & N.C. open / C & N.O. short.
Caution! Risk of electric shock. Set-up and operation should be performed by
Authorized Service Person only.
4. VR1: Sensitivity adjustment.
Turn clockwise for high sensitivity, turn counter-clockwise for low.
5. VR2: Relay activation time adjustment (range about 2 ~ 30 seconds).
Turn clockwise for short time, turn counter-clockwise for long.
6. NC/C/NO Wiring:
YELLOWC: BLACK WHITE NO: NC:
CN1 Connector:
1. DC 12V IN
2. GND
3. AUDIO OUT (option)
4. GND
5. VIDEO OUT
6. RELAY C. (common)
7. RELAY N.O. (normal open)
8. RELAY N.C. (normal close)
CN2 Connector:
1. AUDIO IN (Not Available In US)
2. VIDEO IN (from CCD MODULE)
3. GND
4. DC 12V/120mA OUT (for CCD MODULE)
3
Image Device
Effective Pixels
Resolution
Minimum Illumination
S/N Ratio
Electronic Shutter
AGC
Sync. Mode
Scanning System
Gamma Correction
Sync. Frequency
Video Output
Power Source
Power Consumption
Operation Temp.
Standard Lens
Dimensions
1/3” Sony High Density CCD (960H)
1020 x 508
700 TV Lines
0.1 Lux
More Than 48dB
1/60 to 1/100,000 sec.
>18Db
Internal Sync.
2:1 Interlace
0.45
15.734KHz (H) / 60Hz (V)
Composite: 1.0 Vp-p / 75 Ohm
12VDC
100mA
-10° ~ 60°C (14° ~ 140°F) Less Than 80% RH
3.7mm/F2.0
2.75” x 4.72” x 1.69” (70mm x 120mm x 43mm)
SPECIFICATIONS VT-PIRC2/H
• Use a professional CCTV monitor only to achieve best resolution and performance.
• Camera may also be connected to other devices such as a DVR .
• Use copper braid RG59U coax for best video performance. Video may also be transmitted via
CAT5E cable with the use of video baluns .
• 12VDC Regulated power adapter 12V must be used otherwise the device will be damaged
and un-repairable.
Application Note:


Produktspezifikationen

Marke: Vitek
Kategorie: Nicht kategorisiert
Modell: VT-PIRC2H

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vitek VT-PIRC2H benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Vitek

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-