Vitek VT-PIRB2 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Vitek VT-PIRB2 (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
4
9970 GLENOAKS BLVD. UNIT B SUN VALLEY, CA 91352
PHONE: 888-VITEK-70 / 818-771-0300 FAX: 818-771-0400
WWW.VITEKCCTV.COM | SALES@VITEKCCTV.COM
LIMITED LIABILITY WARRANTY
Your new Camera is guaranteed to be free from defects in materials
and workmanship for a period of two years from the date of
purchase.
The product must have been used only for its intended purpose, and
not been subjected to damage by misuse, willful or accidental
damage, caused by excessive voltage or lightning.
The product must not have been tampered with in any way then the
guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact VITEK directly for all servicing.
B
B
B
B
BL
L
L
L
LA
A
A
A
AC
C
C
C
CK
K
K
K
K
VITEK
VTC-PIR2
B/W & Color PIR Cameras
Product Manual
The VT-PIR2 is a motion activated or continuous imaging
camera that incorporates a CCD camera with a PIR
motion sensor. It can be used as an accessory to an alarm
system or as a stand-alone monitoring device. Vitek PIR
cameras are an excellent choice for use in covert or
hidden camera applications.
2
PIR BOARD LAYOUT
1. LED: When an intrusion is detected, the LED will activate.
2. JP1: Pulse count setting.
1-2 short: Relay will activate when an intrusion is detected once. (For stable
environments or high risk operating environments)
2-3 short: Relay will activate when an intrusion is detected twice within 15 seconds.
(For harsh environments)
3. JP2: Relay output select.
Short: For outer control used in area where DC12V is requested (Limited at 200mA).
Normal: N.C. = DC12V out
Activate: N.O. = DC12V out
Open: Normal relay connector (1.5A at DC24V/1.5A at AC120V/1A at AC240V)
Normal: C & N.C. short / C & N.O. open.
Activate: C & N.C. open / C & N.O. short.
Caution! Risk of electric shock. Set-up and operation should be
performed by authorized service person only.
4. VR1: Sensitivity adjustment.
Turn clockwise for high sensitivity, turn counter-clockwise for low.
5. VR2: Relay activation time adjustment (range about 2 ~ 30 seconds).
Turn clockwise for short time, turn counter-clockwise for long.
6. NC/C/NO Wiring:
C: BLACK NO: WHITE NC: RED
CN1 Connector:
1. DC 12V IN
2. GND
3. AUDIO OUT (option)
4. GND
5. VIDEO OUT
6. RELAY C. (common)
7. RELAY N.O. (normal open)
8. RELAY N.C. (normal close)
CN2 Connector:
1. AUDIO IN (Not Available In US)
2. VIDEO IN (from CCD MODULE)
3. GND
4. DC 12V/500mA OUT (for CCD MODULE)
B
B
B
B
BL
L
L
L
LA
A
A
A
AC
C
C
C
CK
K
K
K
K
3
Image Device
Effective Pixels
Resolution
Minimum Illumination
PIR Detection Range
PIR Alarm Output
AGC
S/N Ratio
Video Output
Auto Electronic Shutter
Standard Pinhole Lens
Power Source
Power Consumption
Operation Temperature
Humidity
Dimensions (WxHxD)
1/3” B/W CCD 1/3” Color CCD
510 x 492 537 x 505
420 TV Lines 380 TV Lines
0.3 Lux / F1.2 1.0 Lux / F1.2
100° / 35' x 35' Coverage Area
NC/N/NO
>18db
More Than 48dB
Composite: 1.0 Vp-p / 75 Ohm
1/60 to 1/100,000 sec.
3.8mm / F2.0
12VDC (200mA Regulated) 12VDC (300mA Regulated)
1.2W
14 (-10ËšF ËšF ~ 140 ËšC ~ 60ËšC)
0-95%
2.75” x 4.72” x 1.69” / 70mm x 120mm x 43mm
VTC-PIRB2 VTC-PIRC2
SPECIFICATIONS
Use a professional CCTV monitor only to achieve best resolution
and performance.
Camera may also be connected to other devices such as a VCR or
Digital Recorder.
Use copper braid RG59U coax for best video performance.
Video may also be transmitted via CAT5E cable with the use of
video baluns model VT-TR1M.
**12VDC Regulated power adapter 12V must be used otherwise
the device will be damaged and un-repairable.


Produktspezifikationen

Marke: Vitek
Kategorie: Nicht kategorisiert
Modell: VT-PIRB2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vitek VT-PIRB2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Vitek

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-