Vimar 01896.M Bedienungsanleitung

Vimar Detektor 01896.M

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vimar 01896.M (4 Seiten) in der Kategorie Detektor. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

U ’ GSER S UIDE

•IMPORTANT•

SAVE THIS BOOKLET!

Includes:

• Warranty

• Safety Warnings

• Parts List

• Operating Instructions

• Accessories List

• Trouble Diagnosis

S I M P L Y A M A Z I N G

XLPRO6

BackPack

Vacuum

BEFORE OPERATING, READ ALL

INSTRUCTIONS IN THIS MANUAL

CAREFULLY.

Table of Contents

Warranty, Important Safety Instructions . . . . . . . . . . . . . . . . . . page 2

Maintenance & Customer Service, Vacuum Cleaner Care,

Operation & Assembly, Grounding Instructions,

Adjustment Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3

Troubleshooting Guide, Parts Listing, Parts Diagram,

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4

Warranty

ORECK MANUFACTURING COMPANY: (Oreck gives you the following

limited warranty for this product only if it was originally purchased for use,

not resale, from Oreck or an Oreck Authorized Retail Dealer.)

Oreck will repair or replace, free of charge, to the original purchaser, any

part which is found to be defective in material or workmanship within one

(1) year of the date of purchase.

This limited warranty does not apply to any part subjected to accident,

abuse, or alteration, misuse, damage caused by fire or act of God, the use

of voltages other than indicated on the serial number plate of this product

or service of this product by other than Oreck or an Oreck Factory

Authorized Service Center.

Oreck does not authorize any person or representative to assume or grant

any other warranty obligation with the sale of this product.

Oreck’s limited warranty is valid only if you retain proof of purchase from

Oreck or an Oreck Authorized Retail Dealer for this product. If you

purchase this product from any other source, your purchase is "AS IS,"

which means Oreck grants you no warranty, and that you, not Oreck,

assume the entire risk of the quality and performance of this product,

including the entire cost of any necessary servicing or repairs of any

defects.

Oreck’s liability for damages to you for any costs whatsoever arising out

of this statement of limited warranty shall be limited to the amount paid for

this product at the time of original purchase, and Oreck shall not be liable

for any direct, indirect, consequential or incidental damages arising out of

the use or inability to use this product.

Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or exclusion may not

apply to you.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT,

INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION

TO THE WARRANTY PERIOD, AND NO WARRANTIES, WHETHER

EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.

Some states do not allow limitations on the duration of implied warranties,

so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

When using an electrical appliance, basic

precautions should always be followed,

including the following:

READ ALL INSTRUCTIONS BEFORE

USING THIS VACUUM

WARNING

To reduce the risk of fire,

electric shock, or injury:

IMPORTANT SAFETY

INSTRUCTIONS

• DO NOT leave the vacuum when plugged in. Unplug from the

outlet when not in use and before servicing.

• To avoid electric shock, DO NOT expose to rain. Store

indoors. DO NOT use on wet surfaces.

• This is NOT a toy. Close attention is necessary when used

around or near children.

• Use only as described in this safety manual. Use only

manufacturer's recommended attachments and accessories.

• DO NOT use this vacuum with damaged cord or plug. If the

vacuum is not working as it should, because it has been

dropped, damaged, left outdoors or dropped into water, return

to a service center or call customer service at:

1-800-989-3535

• DO NOT pull or carry by the cord, use cord as a handle, close

a door on cord or pull cord around sharp edges and corners.

Keep cord away from heated surfaces.

• DO NOT unplug the vacuum by pulling on the cord. To unplug,

grasp the plug, not the cord.

• DO NOT handle the plug of the vacuum with wet hands.

• DO NOT put any objects into openings. DO NOT use with any

opening blocked; keep free of dust, lint, hair and anything that

may reduce air flow.

• Keep hair, loose clothing, fingers, and all parts of body away

from openings and moving parts.

• DO NOT pick up anything that is burning or smoking, such as

cigarettes, matches, or hot ashes.

• DO NOT use without dust bag and/or filters in place.

• DO NOT use the vacuum to pick up flammable or combustible

liquids such as gasoline or use in areas where they may be

present.

• Use extra care when cleaning stairs.

• DO NOT use where oxygen or anesthetics are used.

• Turn off all controls before unplugging

• The extension cord provided with this unit is 50 feet, #16, 3

wire and MUST be used with this unit to insure grounding

protection.

• Replace damaged or worn parts immediately with genuine

original equipment parts to maintain safety and to protect your

limited warranty.

• BackPack Vacuum can become heavy during use. To avoid

injury, DO NOT bend over while the BackPack Vaccum is on

your back.

SAVE THESE INSTRUCTIONS

Maintenance and Customer Service

Your XLPro is a product of precise engineering. If you require additional

information or have problems with your Oreck appliance, you may call

ORECK customer service at: 1-800-989-3535

Please specify the model number and serial/code number which can be

found on the data plate on the back of the vacuum.

Save your sales or purchase slip. Should your Oreck appliance require

warranty service in the U.S.A., present this slip to the Authorized Service

Center as your proof of purchase date or, in Canada, call customer service.

Vacuum Cleaner Care

Treat your vacuum cleaner as you would any other high grade precision

made product. Dropping and other misuses may result in a damaged

unit which will not be covered by warranty.

When not in use, the power cord should be wrapped around the molded-in

cord wrap for storage. After each use, wipe the vacuum body,

accessories and power cord with a damp cloth.

Read this manual completely before operating this vacuum. It is

important to follow the instructions in the manual to prevent the

possibility of injury or damage to the user and/or machine.

Operation & Assembly

This vacuum is equipped with an air-thru motor and is designed for dry

pickup only. Unpack the carton and remove the vacuum and

attachments. The backpack comes assembled; you will need to install

the hose and attachments.

NOTE: Some accessories are packed inside the units.

To Change Paper Filter Bag

1. Turn top lid of vacuum a half turn counterclockwise

and remove from the body.

2. Remove full paper bag from the tank and dispose

of properly.

3. Expand paper filter bag and set inside the cloth

filter.

4. Reinstall top lid and turn a half turn clockwise to

tighten.

CAUTION: Always exercise caution when handling the vacuum.

Dropping the vacuum could cause permanent damage to the internal

components.

Cloth Filter Maintenance

The cloth filter should be cleaned each time you empty the tank. DO

NOT WASH the cloth filter because shrinkage of the cloth and damage

to the gasket can occur. To clean the cloth filter, shake off loose particles

and brush exposed surface with a soft bristle brush.

To Connect Hose

1. Connect the non-swivel end of the hose into the inlet on top of

vacuum.

2. Connect the swivel end of hose to the wand or tool you are

planning to use.

Wand Assembly

The two piece wand requires some assembly.

1. Align the button lock of the upper wand section

with the opening for button lock in the lower

wand section.

2. Push sections together; unit lock is

accomplished.

To Assemble Tools

1. Turn wand nut counterclockwise approximately four

complete turns.

2. Insert the tool into wand and coupling.

3. While holding tool in place, turn nut clockwise until

wand nut is fully locked.

Grounding Instructions

DANGER: Improper use of the grounding plug can result in a risk of

electric shock.

Electrical equipment must be grounded. If it should malfunction or break,

grounding provides a path of least resistance for electrical current to

reduce the risk of electric shock. The vacuum is equipped with a cord

having an equipment-grounding conductor and grounding plug. The

plug must be inserted into an appropriate outlet that is properly installed

and grounded in accordance with all local codes and ordinances.

If repair or replacement of the cord or plug is necessary, bring unit to an

authorized service center. This electric equipment is for use on a

nominal 120 volt circuit, and has a grounded plug that looks like the plug

illustrated in (Fig A).

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or service person if you

are in doubt as to whether the outlet is properly grounded.

DO NOT modify the plug provided with the equipment. If it will not fit the

outlet, have a proper outlet installed by a qualified electrician.

NOTE: In Canada, the use of a temporary adaptor is not permitted by

the Canadian Electrical Code.

Adjustment Instructions

Proper fitting and adjustment of the straps is necessary to ensure fatigue

free use. item to remember when adjusting theThe most important

shoulder straps and the hip belt is that it is the hip belt that supports

the BackPack, not the shoulder straps. The shoulder straps are there

to provide stability to balance the load, to bear the weight.NOT

Hip Belt

Loosen the shoulder straps and the hip belt and place

the BackPack on your back with your arms through the

shoulder straps. Position the belt on your hips. This

should be about 2” below where you would wear a

normal belt. Connect the male and female connectors

together. Grasp the adjustment strap on each side of

the hip belt connector and pull out, parallel to the

ground, until the hip belt is firmly cinched to your hips.

Shoulder Straps

Now that you have the hip belt in place and tightened

you may adjust the shoulder straps. Grasp the

adjustment strap at the bottom of each shoulder pad and

pull the straps downward until the straps are fitted to

your body. When properly adjusted you should be able

to slide two fingers under the strap on top of your

shoulder. Any irritation around the shoulder area

indicates your shoulder straps are too tight.

TO OPEN

TO LOCK



Produktspezifikationen

Marke:	Vimar
Kategorie:	Detektor
Modell:	01896.M

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vimar 01896.M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Detektor Vimar

Vimar 01895.G Bedienungsanleitung

17 August 2024

Vimar 19421 Bedienungsanleitung

16 August 2024

Vimar 20421.N Bedienungsanleitung

16 August 2024

Vimar 19486.B Bedienungsanleitung

15 August 2024

Vimar 19420.M Bedienungsanleitung

14 August 2024

Vimar 16592.B Bedienungsanleitung

13 August 2024

Vimar 01896 Bedienungsanleitung

13 August 2024

Vimar 01895 Bedienungsanleitung

13 August 2024

Vimar 19421.M Bedienungsanleitung

11 August 2024

Vimar 20486.B Bedienungsanleitung

10 August 2024

Bedienungsanleitung Detektor

Neueste Bedienungsanleitung für -Kategorien-

Alecto HA-58 Bedienungsanleitung

4 Oktober 2024

Amprobe ULD-400-T Bedienungsanleitung

1 Oktober 2024

Hager EE809 Bedienungsanleitung

22 September 2024

DSC RM-2 Bedienungsanleitung

14 September 2024

K40 Platinum200 Expert Bedienungsanleitung

12 September 2024

K40 Platinum360 Expert Bedienungsanleitung

12 September 2024

K40 RL200di Bedienungsanleitung

12 September 2024

Noyafa NF-820 Bedienungsanleitung

6 September 2024

STI BIO-7505 Bedienungsanleitung

6 September 2024

Soler & Palau CPTA Bedienungsanleitung

6 September 2024