Viking BLK-4 Bedienungsanleitung

Viking Effektmaschine BLK-4

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Viking BLK-4 (8 Seiten) in der Kategorie Effektmaschine. Dieser Bedienungsanleitung war fĂĽr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
C O M M U N I C AT I O N & S E C U R I T Y S O L U T I O N S
Provide LED Strobe / Beacon
Visual Indication of Line Status
Features
The BLK-4 provides high visibility indication of analog line
status through a high powered 360Âş LED strobe and/or
beacon visual indicator. The is the ideal solutionBLK-4
for the hearing impaired and can be used equally well in
loud warehouses or factories, where ringing phones can
not be heard. Alternatively, the can be used to addBLK-4
emergency notification to pre-existing emergency phones
by turning on the strobe light when the emergency phone
is in use.
The included control module has a disable input which is
ideal for two-button emergency phones, such as Viking’s
E-1600-20A, allowing “Info” button calls to be placed with-
out activating the relay (turning on the emergency strobe
light, camera, etc.) Four DIP switches are provided for
turning ring detection on or off, off-hook/loop detection on
or off, 12VDC or dry relay contact output and for selecting
a ring cadence mode which allows the relay to follow ring-
ing or to remain activated during the off time of standard
ring cadence. The control module can be installed on any
standard telephone line or analog PABX/KSU station. The
strobe can be interfaced to flash on ringing, off-hook or a
combination of ringing and off-hook (line in-use).
The BLK-4 is designed for indoor applications. The BLK-
4-EWP is equipped with Enhanced Weather Protection
(EWP) for outdoor installations where the unit is exposed
to precipitation or condensation. For more information,
see .DOD# 859
The kit includes: (1) control module, (1) SL-2/SL-2-EWP
blue LED strobe light, (1) 12V DC power adapter, (16) gel-
filled butt connectors and (1) single gang weatherproof
mounting box with gaskets and hardware.
• BLK-4-EWP’s control module and strobe light come
with Enhanced Weather Protection (EWP), EWP prod-
ucts are designed to meet IP66 Ingress Protection
Rating, see DOD# 859
• Durable polycarbonate lens
• High output long life LED technology
• Four programmable flash patterns:
- Single Flash - Double Flash
- Quad Flash - Flicker Flash
• 6 programmable beacon and strobe brightness set-
tings
• Immune to shock and vibration
• Flush mount or surface mount with weatherproof sin-
gle gang box (included)
• 3/4” knockouts for connecting conduit, etc.
• Strobe and control module may be installed separately
• Can be configured to signal: ringing, off-hook, a com-
bination of both ringing and off-hook (line in-use), or
triggered from a contact closure
• One set of (NO) normally open and (NC) normally
closed relay contacts provided
• Selectable ring cadence mode (strobe light will remain
flashing between rings)
• Switched 12V DC output (follows relay activation for
powering strobe lights, cameras, etc.)
• On/off switches for ring detection and off-hook/loop
detection
• Disable input, ideal for use with two-button emergency
phones like Viking’s ( ), will notE-1600-20A DOD# 215
activate strobe light on “Info” calls
• Ringing Phone or TTY indication for the hearing impaired
• Ringing phone indication in loud warehouses and factories
• Emergency illumination for emergency phones in elevators,
campuses, hallways, parking ramps, etc.
• Alarm indication for security systems or alarm panels with
phone dialers
Power: 120V AC to 12V DC adapter provided
Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft,
2 pair = 225 ft, 3 pair = 325 ft, 4 pair = 475 ft
Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft, 6
wires = 300 ft
Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")
Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x 2.1"
x 1.0”)
Shipping Weight: 1.5 kg (3.3 lbs)
Operating Temperature: -26° to 54°C (-15° to 130° F)
Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC
Minimum Loop Current: 15 mA
Minimum Ring Voltage: 25V RMS
Ringer Equivalence: 0.5 A REN
Disable/Info Switch Input: 50mA/80mW maximum
Strobe Flash Rate: 60 flashes per minute (default) see Strobe
Flash Patterns page 6
Maximum Strobe Light Output @ 15VDC: Clear lens: 323 lu-
mens, Amber lens: 242 lumens, Blue lens: 116 lumens, Red lens:
66 lumens
Humidity BLK-4- : 5% to 95% non-condensing
Humidity BLK-4-EWP- : up to 100% condensing
Mounting: Fasten to wall, post, etc. with complete surface mount-
ing hardware included
Connections: Color coded wires with gel-filled butt connectors
BLK-4/EWP
Line Status LED Strobe/
Beacon Light Kit
September 29, 2014
Applications
Specifications
VIKING
* Gel-Filled Butt
Connectors (included)
Note: Polarity Sensitive!
(-) Black with
Red stripe
120V AC
(+) Red with
Black stripe
Black w/Red stripe
Red with Black stripe
Red
Black
green
Orange
Purple
Yellow
White
White
Blue
Blue
Gray
Brown
Green w/ Yellow Stripe
Red w/ Yellow Stripe
Normally Closed
Common
Normally Open
4.60
2.50
2.84
1.50
0.6
1.05
2.0
2.75
4.4
4.0
12V DC
adapter
(included)
Control Module
12VDC Output
(Strobe Light Power)
Auxiliary
Relay
Contacts
Switched 12VDC Output
(to green SL-2 control lead)
Trigger Input
Disable/Info Switch Input
To Terminal Device/Phone
To C.O. Line or Analog
PABX/KSU Station
12VDC Input
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
Internal View of the
Weatherproof Single
Gang Box (included)
Side View of the
Strobe Light (included)
Back View of the
Weatherproof Single Gang
Box (included)
Negative
Positive
* Note: The gel-filled (water tight)
butt connectors are designed for
insulation displacement. Do not strip
wires prior to terminating.
Wiring
IMPORTANT: Electronic devices are susceptible to lightning and power
station electrical surges from both the AC outlet and the telephone line.
It is recommended that a surge protector be installed to protect against
such surges.
2
Installation
* Gel-Filled Butt
Connectors (included)
*** SL-2/SL-2-EWP
Blue Strobe Light
Foam
Gasket
Strobe
Mounting Ring
1/2" Close Nipple
Faceplate
Foam
Gasket
(2) 10-32 x 3/8" self
tapping screws
(2) 6-32 x 3/4"
screws
** Nipple
1/2" x close
(2) Knockout
Plugs
Control
Module
(2) 7/8" Nylon
spacers
Red
Green Green
Black Black
Red
Internal View of the
Weatherproof Single
Gang Box (included)
A. Installing the Strobe Light Using the Included Weatherproof Box
* Note: The gel-filled (water tight) butt connectors are designed for insulation displacement. Do not strip wires
prior to terminating.
** Important: First fully tighten the nipple into the faceplate. Next add the (2) nylon spacers, then fasten the strobe
mounting ring.
*** Note: For outdoor applications, orient the blue strobe light with the screws at the top and bottom. Use a bead
of silicone to fill any gaps or spaces to prevent water from entering the strobe light.
The BLK-4 Strobe Light Kit may be
mounted without using the included
weatherproof box. To mount the
strobe light from the front, use the
diagram shown to the right.
RED
GREEN
BLAC
K
SL-2/SL-2-EWP
Strobe Light
(included)
To BLK-4
Control
Module
(included)
2.75”
(2) #8-32 x 2 1/2 Phillips
Head Self Tapping Screws (included)
Wall, post, etc.
C. Rear Mounting Without Weatherproof Box
To mount the strobe light from the rear,
use the diagram shown to the right.
B. Front Mounting Without Weatherproof Box
(2) #10-32 x 5/8
Phillips Head Self
Tapping Screws
(included)
SL-2/SL-2-EWP
Strobe Light
(included)
To BLK-4 Control
Module (included)
RED
GREEN
BLACK
3

Produktspezifikationen

Marke: Viking
Kategorie: Effektmaschine
Modell: BLK-4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Viking BLK-4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Effektmaschine Viking

Viking

Viking BLK-4 Bedienungsanleitung

28 Juli 2024

Bedienungsanleitung Effektmaschine

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Velleman

Velleman vdl660rl Bedienungsanleitung

10 Oktober 2024
BeamZ

BeamZ SparkleWall 151.201 Bedienungsanleitung

8 Oktober 2024
Elation

Elation Sixbar 1000 IP Bedienungsanleitung

6 Oktober 2024
Valueline

Valueline VLLINKLED10 Bedienungsanleitung

2 Oktober 2024
BeamZ

BeamZ LUCID 1.2 150.462 Bedienungsanleitung

2 Oktober 2024
Behringer

Behringer V-verb Pro REV2496 Bedienungsanleitung

2 Oktober 2024
BeamZ

BeamZ BPP200 151.231 Bedienungsanleitung

30 September 2024
BeamZ

BeamZ Mini 153.325 Bedienungsanleitung

30 September 2024
BeamZ

BeamZ Apollo Bedienungsanleitung

28 September 2024
Elation

Elation Sixpar 300IP Bedienungsanleitung

25 September 2024