ViewSonic SC-Z55 Bedienungsanleitung
ViewSonic
Thin Client
SC-Z55
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ViewSonic SC-Z55 (25 Seiten) in der Kategorie Thin Client. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/25
SC-Z55
Zero Client
User Guide
Model No. VS15168
i
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modiî‚¿cations not expressly approved by the
party responsible for compliance could void your authority to operate the equipment.
For Canada
• This Class B digital apparatus complies with Canadian CAN ICES-3 (B).
• Cet appareil numérique de la classe B est conforme à la norme NMB-3 (B) du Canada.
Following information is only for EU-member states:
The mark is in compliance with the Waste Electrical and Electronic Equipment
Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment including any
spent or discarded batteries or accumulators as unsorted municipal waste, but
use the return and collection systems available.
If the batteries, accumulators and button cells included with this equipment, display
the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy
metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or
more than 0.004% Lead.
ii
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of î‚¿re or electric
shock, do not expose this apparatus to rain or moisture.
6. Do not block any ventilation openings. Install the equipment in accordance with the
manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including ampliî‚¿ers) that produce heat.
8. Do not attempt to circumvent the safety provisions of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade and the third
prong are provided for your safety. If the plug does not î‚¿t into your outlet, consult an
electrician for replacement of the outlet.
9. Protect the power cord from being tread upon or pinched, particularly at the plug,
and the point where if emerges from the equipment. Be sure that the power outlet is
located near the equipment so that it is easily accessible.
10. Only use attachments/accessories speciî‚¿ed by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table speciî‚¿ed by the
manufacturer, or sold with the equipment. When a cart is used, use caution
when moving the cart/equipment combination to avoid injury from tipping over.
12. Unplug this equipment when it will be unused for long periods of time.
13. Refer all servicing to qualiî‚¿ed service personnel. Service is required when the unit
has been damaged in any way, such as: if the power-supply cord or plug is damaged,
if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or
moisture, or if the unit does not operate normally or has been dropped.
14. Do not remove equipment covers and access any of the components inside the
equipment. Any access inside the equipment without an authorized or certiî‚¿ed
technician may cause serious injuries and damage. For any problem, contact your
dealer for assistance.
15. Don’t use a keyboard and mouse that in total require more than 200 mA of rated
current during operation.
16. Use only power supplies listed in the user instructions.
Produktspezifikationen
| Marke: | ViewSonic |
| Kategorie: | Thin Client |
| Modell: | SC-Z55 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit ViewSonic SC-Z55 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Thin Client ViewSonic
5 September 2024
5 September 2024
6 August 2024
6 Juli 2024
8 November 2023
31 Oktober 2022
Bedienungsanleitung Thin Client
- Thin Client Samsung
- Thin Client Acer
- Thin Client Asus
- Thin Client HP
- Thin Client Optoma
- Thin Client Lindy
- Thin Client Dell
- Thin Client ELO
- Thin Client Black Box
- Thin Client Fujitsu
- Thin Client Akasa
- Thin Client Intellinet
- Thin Client Evga
- Thin Client Moxa
- Thin Client Mobotix
- Thin Client Advantech
- Thin Client Crestron
- Thin Client Foxconn
- Thin Client MCT
- Thin Client NComputing
- Thin Client Dell Wyse
Neueste Bedienungsanleitung für -Kategorien-
3 Oktober 2024
5 September 2024
1 September 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
27 August 2024
24 August 2024
24 August 2024