ViewSonic PX706HD Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ViewSonic PX706HD (76 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/76
PX706HD
DLP Projector
User Guide
Model No. VS17266
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specic languages using the Regional selection
box in the upper right corner of our website. Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”
i
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the follow-
ing two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy, and
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment o󰀨 and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment and receiver.
yConnect the equipment into an outlet on a circuit di󰀨erent from that to which the
receiver is connected.
yConsult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modications not expressly approved
by the party responsible for compliance could void your authority to operate the
equipment.
For Canada
CAN ICES-003(B) / NMB-003(B)
CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU and Low Voltage
Directive 2014/35/EU.
Following information is only for EU-member states:
The mark is in compliance with the Waste Electrical and Electronic
Equipment Directive 2012/19/EU (WEEE).
The mark indicates the requirement NOT to dispose the equipment
including any spent or discarded batteries or accumulators as unsorted
municipal waste, but use the return and collection systems available.
If the batteries, accumulators and button cells included with this equipment,
display the chemical symbol Hg, Cd, or Pb, then it means that the battery
has a heavy metal content of more than 0.0005% Mercury or more than,
0.002% Cadmium, or more than 0.004% Lead.
ii
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this unit near water.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install the unit in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other devices (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third
prong are provided for your safety. If the provided plug does not t into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs.
Convenience receptacles and the point where they exit from the unit. Be sure
that the power outlet is located near the unit so that it is easily accessible.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by
the manufacturer, or sold with the unit. When a cart is used, use
caution when moving the cart/unit combination to avoid injury from
tipping over.
13. Unplug this unit when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
unit has been damaged in any way, such as: if the power-supply cord or plug is
damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed
to rain or moisture, or if the unit does not operate normally or has been dropped.


Produktspezifikationen

Marke: ViewSonic
Kategorie: Videostrahl
Modell: PX706HD
Marktpositionierung: Präsentation
Eingebaute Lautsprecher: Ja
WLAN: Nein
Breite: 293 mm
Tiefe: 330 mm
Gewicht: 2700 g
Mitgelieferte Kabel: AC, VGA
Produkttyp: Short-Throw-Projektor
Produktfarbe: Weiß
Höhe: 115 mm
Energiequelle: AC
Platzierung: Desktop, Ceiling
RMS-Leistung: 5 W
AC Eingangsspannung: 100-240 V
AC Eingangsfrequenz: 50 - 60 Hz
Eingebautes Display: Nein
Anzahl USB 2.0 Anschlüsse: 1
On-Screen-Display (OSD): Ja
Menüsprachen: ARA, CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FIN, FRE, GRE, IND, ITA, JPN, KOR, POL, POR, RUS, SWE, THA, TUR, VIE
Betriebstemperatur: 0 - 40 °C
Verpackungsbreite: 365 mm
Verpackungstiefe: 300 mm
Verpackungshöhe: 188 mm
Paketgewicht: 3800 g
Fernbedienung enthalten: Ja
Eingebauter Ethernet-Anschluss: Ja
Stromverbrauch (Standardbetrieb): 310 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): 1
Warentarifnummer (HS): 85286200
Betriebsanleitung: Ja
Kontrastverhältnis: 22000:1
Anzahl HDMI-Anschlüsse: 2
Stromverbrauch (Standby): 0.5 W
Geräuschpegel: 32 dB
Analoges Signalformatsystem: NTSC, PAL, SECAM
Composite Video-Eingang: 1
PC Audio-Eingang: Ja
HDCP: Ja
Unterstützte Video-Modi: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Unterstützte Grafik-Auflösungen: 640 x 480 (VGA), 1920 x 1200 (WUXGA)
Smart-TV: Nein
DVI Anschluss: Nein
Full-HD: Ja
Zoom-Fähigkeit: Ja
Integrierter Kartenleser: Nein
Projektorhelligkeit: 3000 ANSI Lumen
Projektionstechnologie: DMD
native Auflösung des Projektors: 1080p (1920x1080)
Matrix Größe: 0.65 Zoll
Anzahl der Farben: 1,07 Milliarden Farben
Trapezkorrektur, vertikal: -40 - 40 °
Projektionsflächenkapazität: 30 - 300 Zoll
Projektionsabstand: 0.9 - 2.2 m
Fokus: Manuell
Anzahl VGA (D-Sub) Anschlüsse: 2
Serielle Schnittstelle: RS-232
HDMI-Version: 1.4
Anzahl OSD-Sprachen: 20
Anzahl Lampe(n): 1 Lampen
Lebensdauer der Lichtquelle: 4000 h
Lampenleistung: 240 W
Typ der Lichtquelle: Lampe
Brennweitenbereich: 10.2 - 12.24 mm
Anzahl S-Video-Eingänge: 1
Trapezkorrektur, horizontal: -40 - 40 °
Vertikaler Scanbereich: 23 - 120 Hz
Horizontaler Scanbereich: 15 - 102 kHz
Lebensdauer der Lichtquelle (ökonomischer Modus): 15000 h
Stromeingang: Ja
Geräuschpegel (Energiesparmodus): 27 dB
Zoomverhältnis: 2.0:1
Blendenbereich (F-F): 2.6 - 2.78
Offset: 105 %
Projektionsverhältnis: 0.69-0.83
HDMI-Steckverbindertyp: Volle Größe
PC Audio Ausgang: Ja
Interaktiv: Nein

Brauchst du Hilfe?

Wenn Sie Hilfe mit ViewSonic PX706HD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Videostrahl ViewSonic

Bedienungsanleitung Videostrahl

Neueste Bedienungsanleitung für -Kategorien-