Velleman VTSSC50N Bedienungsanleitung
Velleman
Lötmaschine
VTSSC50N
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Velleman VTSSC50N (27 Seiten) in der Kategorie Lötmaschine. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/27
VTSSC50N
SOLDERING STATION WITH CERAMIC HEATER
SOLDEERSTATION MET KERAMISCH VERWARMINGSELEMENT
STATION DE SOUDAGE AVEC ÉLÉMENT D'ÉCHAUFFEMENT
CÉRAMIQUE
ESTACIÓN DE SOLDADURA CON ELEMENTO CALENTADOR CERÁMICO
LÖTSTATION MIT KERAMISCHEM HEIZELEMENT
ESTAÇÃO DE SOLDADURA COM ELEMENTO DE AQUECIMENTO
CERÂMICO
STACJA LUTOWNICZA Z GRZAŁKĄ CERAMICZNĄ
USER MANUAL 2
HANDLEIDING 5
MODE D'EMPLOI 8
MANUAL DEL USUARIO 12
BEDIENUNGSANLEITUNG 15
INSTRUKCJA OBSŁUGI 18
MANUAL DO UTILIZADOR 22
VTSSC50N
V. 09 29/01/2021 2 ©Velleman nv –
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
This device can be used by children aged from 8 years and above,
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning the use of the device in a
safe way and understand the hazards involved. Children shall not
play with the device. Cleaning and user maintenance shall not be
made by children without supervision.
Read and understand this manual and all safety signs before
using this appliance.
Indoor use only. Keep this device away from rain, moisture,
splashing and dripping liquids. Never put objects filled with liquids
on top of or close to the device.
Always disconnect mains power when the device is not in use or
when servicing or maintenance activities are performed. Handle
the power cord by the plug only.
Caution! leave the power cord plugged in After switching off,
for a few minutes. When you switch off the unit, the automatic
cooling function blows cooling air through the heater pipe for a
short period. This protects the heater from damage and extends
its lifetime. Do not disconnect the mains plug during this cooling
process.
Do not crimp the power cord and protect it against damage.
Warning! If the power cord is damaged, it must be replaced by
the manufacturer, its service agent, or similarly qualified persons
in order to avoid any hazard.
Make sure that the available voltage does not exceed the voltage
stated in the specifications of this manual.
Plug the power cord into a suitable, mains outlet. earthed
Risk of electroshock when opening the cover. Touching live
wires can cause life-threatening electroshocks. Do not
disassemble or open the housing yourself. Have the device
repaired by qualified personnel.
Do not operate the device with wet hands.
VTSSC50N
V. 09 29/01/2021 3 ©Velleman nv –
Never use the device on live electronic circuits. Make sure power
to the work piece is cut and capacitors are discharged.
Do not use near inflammable products or in explosive
atmospheres. Heat can cause fire to inflammable products even
when they are not in sight. Only use in properly ventilated rooms.
Incorrect use may cause fire.
Do not touch the shafts, tips, or hot air gun as this can cause
serious burns. Keep the tips and hot air away from the body,
clothes, or other flammable material. Do not aim the hot air gun
at the eyes. Use gloves and/or heat-resistant tools to pick up the
PCB assembly to prevent burns. Always return the irons and gun
to their stands between uses; always let the device cool down
after use and before storage.
Place the device on a level, stable, and fire resistant working
surface.
WARNING! - This tool must be placed on its stand when not in
use; do not leave the tool unattended when switched on.
Do not inhale solder fumes. The vapours that are released during
soldering are harmful. Therefore, you shall only use the soldering
station in well-ventilated areas or under an exhaust hood (solder
fume extractor). Dispose of fume filters and solder residue in
accordance with local regulations.
• Use the soldering iron on a heatproof workbench.
• Place the soldering iron in its holder after use.
• Let a hot soldering iron cool down naturally and do not immerse in water.
3. Features
• manual temperature setting
• power-on LED indication
• with on/off switch
• ceramic heating element
• with stand for left- or right-handed use
• standard tip (incl.): BITC50N2 (1.0 mm).
4. Operation
• Verify whether the operating voltage of the unit is compatible with the mains voltage prior to plugging in
this device.
• Make sure that the device was not damaged in transit.
• Use the rotary control on the front panel to set the desired temperature.
5. Common Causes for Tip Failure
• The tip is not sufficiently tinned.
• Wiping the tip on a surface with high sulphur content or on a dirty or dry sponge or rag.
• Contact between the tip and organic or chemical substances such as plastic, silicone, grease, etc.
• Impurities in the solder and/or solder with a low tin content.
Note: The heating element may be damaged when its temperature reaches 430 (806 °C °F).
Produktspezifikationen
| Marke: | Velleman |
| Kategorie: | Lötmaschine |
| Modell: | VTSSC50N |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Velleman VTSSC50N benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lötmaschine Velleman
10 August 2024
4 August 2024
4 August 2024
30 Juli 2024
29 Juli 2024
28 Juli 2024
27 Juli 2024
26 Juli 2024
25 Juli 2024
23 Juli 2024
Bedienungsanleitung Lötmaschine
- Lötmaschine CFH
- Lötmaschine Basetech
- Lötmaschine Nedis
- Lötmaschine Parkside
- Lötmaschine Cocraft
- Lötmaschine FERM
- Lötmaschine Ryobi
- Lötmaschine Trotec
- Lötmaschine Maestro
- Lötmaschine Einhell
- Lötmaschine Güde
- Lötmaschine Fieldmann
- Lötmaschine Weller
- Lötmaschine Silverline
- Lötmaschine Holzmann
- Lötmaschine GYS
- Lötmaschine Telwin
- Lötmaschine Toolcraft
- Lötmaschine Craftsman
- Lötmaschine Powerplus
- Lötmaschine Ozito
- Lötmaschine Ridgid
- Lötmaschine Mercury
- Lötmaschine Steren
- Lötmaschine Epcom
- Lötmaschine Truper
- Lötmaschine Cigweld
- Lötmaschine Edsyn
- Lötmaschine Ersa
- Lötmaschine UNIMIG
- Lötmaschine Uten
- Lötmaschine Portasol
- Lötmaschine JBC
- Lötmaschine Hakko
- Lötmaschine Stamos
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024