Velleman VTBAL2 Bedienungsanleitung

Velleman Waage VTBAL2

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Velleman VTBAL2 (7 Seiten) in der Kategorie Waage. Dieser Bedienungsanleitung war fĂĽr 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/7
VTBAL2
MINI SCALES (500g / 0.1g)
MINIATUUR WEEGSCHAAL (500g / 01g)
BALANCE DE POCHE (500g / 0.1g)
BALANZA EN MINIATURA (500g / 0.1g)
MINI-WAAGE (500g / 0.1g)
USER MANUAL
GEBRUIKERSHANDLEIDING
NOTICE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSANLEITUNG
VTBAL2 VELLEMAN
2
VTBAL2 VELLEMAN
3
VTBAL2 – MINI SCALES (500g / 0.1g)
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VTBAL2! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Use
a. Preparation
• Open the battery compartment at the back of your scales and insert both batteries. Mind the polarity. Make
sure the cover is placed on the scales.
b. Calibration
• Remove the lid and press the ON / TARE button. The will display “0.0” and “g” meaning the VTBAL2
weighing unit is grams. If not, press the CAL / MODE button until it does.
• Hold the CAL / MODE button pressed for 3 seconds until “CAL 0” flashes onto the display.
• Put one of the standard calibration weights (20g, 40g or 100g) onto the weighing platform.
• Wait a couple of seconds until “CAL F” is displayed. The scales are now calibrated and ready for use. “CAL
E” is displayed when an error has occurred. In that case, repeat steps 2 to 4.
c. Other Functions
• Press the CAL / MODE button to choose the weighing unit: g (grams), oz (ounces), dwt (pennyweight), ozt
(troy ounces), grain and Ct (carats).
• “LO- -”: low battery indication. Replace the batteries with of the same type and specifications.
• “O- -Ld”: weight overload.
3. Technical Specifications
Power Supply 2 x 3.0V batteries (incl.) CR2032C
Capacity 500g
Resolution 0.1g
Tare Range 0 ~ 500g
Operation Temperature 15°C ~ 35°C
The information in this manual is subject to change without prior notice.

Produktspezifikationen

Marke: Velleman
Kategorie: Waage
Modell: VTBAL2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Velleman VTBAL2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Waage Velleman

Velleman

Velleman VTBAL5 Bedienungsanleitung

5 August 2024
Velleman

Velleman VTBAL2 Bedienungsanleitung

10 Juli 2024

Bedienungsanleitung Waage

Neueste Bedienungsanleitung fĂĽr -Kategorien-

PCE Instruments

PCE Instruments PCE-ABT 220L Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-BSW 3 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-BT 200 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-BS 300 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments MPC-3 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-CS 10000N Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-CS 300 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-PB 75N Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-PB 200N Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-WS 30 Bedienungsanleitung

16 Oktober 2024