Velleman MML6R Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Velleman MML6R (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
MML6R
LED BADGE - 7 x 23 DOT - USB
LEDNAAMKAARTJE/-BADGE 7 x 23 DOT- USB
BADGE LED 7 x 23 DOT - USB
INSIGNIA LED 7 x 23 DOT - USB
LED-NAMENSSCHILD 7 x 23 PUNKT - USB
USER MANUAL
GEBRUIKERSHANDLEIDING
NOTICE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSHANDLEITUNG
MML6R_v2 VELLEMAN
2
MML6R – LED BADGE - 7 x 23 DOT - USB
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the
environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a
specialized company for recycling. This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was
damaged in transit, do not install or use it and contact your dealer.
2. General Guidelines
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not
accept responsibility for any ensuing defects or problems.
• Keep this device away from rain, moisture, direct sunlight and extreme heat.
• Use this badge with ambient temperatures between 0°C ~ 40°.
• Do not use the device immediately after it has been exposed to changes in temperature. Protect the device against
damage by leaving it switched off until it has reached room temperature.
• Protect this device from shocks and abuse. Avoid brute force when installing or operating the device.
• Clean this badge using a soft and lightly damp cloth. Avoid using solvents or aggressive detergents.
• Use the original packaging if the device is to be transported.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• There are no user-serviceable parts. Contact your dealer for spare parts if necessary.
• Keep the device away from children and unauthorised users.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks, crash, etc.
Using the device in an unauthorised way will void the warranty.
The badge will hold your jacket lapel or other garment by means of the magnet at the back. Loosen the plate by
gently sliding it away from the magnets from. Make sure not to pull the plate off the magnets to avoid damage.
3. Preparation
• Charging the Battery
Connect the badge to your PC using the included USB cable. The charging indicator flashes while charging and will stop
when the battery is fully charged.
• Installing the Software
Place the included CD-ROM into your CD-ROM drive and run setup.exe. Follow the instructions to complete the installation.
4. Programming
• Programming a Message
Make sure the battery level is sufficient. Charge the badge if necessary. When fully charged, connect the badge to the PC
using the included USB cable. Double click the badge icon on your PC desktop. Type your message in the message window.
Select a font, a scrolling speed, a scrolling mode and display luminance (see below). Finally click [Send] button to load the
message onto the badge.
MML6R_v2 VELLEMAN
3
• Editing a Message
Right click on one of the image icons, below the message windows, and select [Manual Edit]. An edit window will pop up.
You can now draw or edit your own characters: left click the box to draw and right click the box to erase. When finished,
select [Paste Text] or [Paste Bitmap] to paste it at the end of the message.
• Editing a Font
Right click on one of the image icons, below the message windows, and select [Font]. An edit window will pop up. Select
[Custom Font] to edit. Edit the font like you would edit a character (see above).
• Functions
The badge can store up to 6 messages, each containing up to 140 characters. The badge supports Latin 1 MML6R
characters for texts in French, Spanish, German…
Press [On/Off] to switch on the badge. Press [Enter] to enter the setup menu. Enter the submenu by pressing [Enter] Select
and select your message with [Up] or [Down]. Press [Enter] to confirm. Now, press [Enter] and select a submenu (Speed,
Lum Move Flash then Move Scroll Up Scroll Down Flash, , , , , or ) with [Up] or [Down]. Press [Enter] to enter the Freeze
submenu. Adjust the function with [Up] or [Down] and press [Enter] to confirm. Hold [On/Off] pressed to switch off the badge.
5. Technical Specifications
Display Pixels 7 x 23
Storage Capacity max. 140 characters x 6 messages
Display Language English, German, French, Spanish, Italian, etc.
Available Characters Latin 1
Scrolling Speed 8 steps adjustable
Display Mode 6 steps
Luminance 8 steps
Power Supply 1 x rechargeable lithium battery
Battery Life 7 ~ 10h
Charge Time 3h
Interface USB
Dimensions 73.5 x 31.5 x 9.5mm
Dimensions Display 18 x 61mm
Weight 30g
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or
injury resulted from (incorrect) use of this device. For more info concerning this product, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior notice.


Produktspezifikationen

Marke: Velleman
Kategorie: Nicht kategorisiert
Modell: MML6R

Brauchst du Hilfe?

Wenn Sie Hilfe mit Velleman MML6R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Velleman

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-