Velleman KSR6 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Velleman KSR6 (19 Seiten) in der Kategorie Spielzeug. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/19
KSR6 – "LADYBUG" ROBOT KIT
1. Introduction & Characteristics
Thank you for buying the KSR6! Read this manual carefully before bringing the device into use.
The KSR6 uses infrared emitting diodes as "eyes" to avoid obstacles in its path. The Ladybug automatically makes a
left turn when it detects an object. It continues to move forward as long as there's no detection.
The Kit comes complete with 2 sets of differently designed legs, which move in their own distinct way. Fun and
excitement are guaranteed.
The KSR6 requires four 1.5Vdc AAA-batteries (not included).
Apart from the batteries, y rs, a soldering iron, a diagonal cutter, a ou will also need a pair of long-nose plie
screwdriver, a soldering iron and a length of solder wire.
2. Electronic Parts List Fig. 1
1. resistor: 1x 10 (brown/black/black/gold) Ω
2x 15Ω (brown/green/black/gold)
2x 100Ω (brown/black/brown/gold)
1x 1K (brown/black/red/gold)
4x 4K7 (yellow/purple/red/gold)
3x 10K (brown/black/orange/gold)
3x 120K (brown/red/yellow/gold)
1x 1.8M (brown/grey/green/gold)
2. ceramic capacitor: 1x type 331, 4x type 104
3. electrolytic capacitor: 1x 4.7µf, 2x 100µf
4. IR emitting diode 5mm, clear (1x)
5. photo transistor, black (1x)
6. black tube (1x)
7. diode 1N4148 (1x)
8. pin header 4 pins (1x)
9. female pin header 4 pins (1x)
10. transistor: 3x C945, 1x A733, 2x 8050, 2x 8550
11. LED holder (2x)
12. IC: 1x type LM324 (14 pins)
13. IC socket 14 pins (1x)
14. battery connector (1x)
15. pin (4x)
16. variable resistor 50K (1x)
17. slide switch (1x)
18. connector with wire: 1 x yellow, 1 x green,
1 x orange, 1 x blue
19. battery holder (1x)
20. PCB (1x)
3. Mechanical Parts List
1. 2x screw 3x6mm (P13)
Fig. 2
2. 9x screw 3x6mm (P14)
3. 3x nut M3 (P15)
4. 4x hex post 10mm (P16)
5. 1x body (P17)
6. 2x antenna (P18)
KSR6 1 VELLEMAN
4. Assembly
a) PCB Assembly
Start the assembly by mounting the resistors. The names of all components have been printed on the PCB:
Part ID Description Colour Code Quantity
R11 10Ω brown/black/black/gold 1
R12/17 15Ω brown/green/black/gold 2
R13/16 100Ω brown/black/brown/gold 2
R1 1K brown/black/red/gold 1
R4/9/10/15 4K7 yellow/purple/red/gold 4
R2/3/5 120K brown/red/yellow/gold 3
R6~8 10K brown/black/orange/gold 3
R14 1.8M brown/grey/green/gold 1
Mount the capacitors, the transistors and the diode next:
Part ID Description Quant.
C1 ceramic capacitor 331 1
C2/3 ceramic capacitor 104 2
EC3 electrolytic capacitor 0.47µf 1
EC1/2 electrolytic capacitor 100µf 2
Q1/2/7 transistor C945 3
Q8 transistor A733 1
Q4/5 transistor 8050 2
Q3/6 transistor 8550 2
D1 diode 1N4148 1
Mount the IC socket, the battery connector, the slide switch, the variable resistor, the pins, the IC and the pin header.
Part ID Description Quant.
IC1 IC socket (fig.1 #13) 1
BAT. battery connector (fig.1 #14) 1
SW. slide switch (fig.1 #17) 1
VR1 variable resistor (fig.1 #16) 1
M1 (+/-)
M2 (+/-) pins (fig.1 #15) 4
IC1 type LM324
1
To IR_PCB pin header (fig. 1 #8)
1
Mount the IR emitting diode, the photo transistor and the female header:
Part ID Description Quantity
TX_IR IR emitting diode (fig. 1 #4) 1
RX_IR photo transistor (fig. 1 #5) 1
From Main_Board female header (fig. 1 #9) 1
Fig. 3a
Fig. 3b
KSR6 2 VELLEMAN
b) Gearbox Assembly
Parts
P1: motor x 2
P2: motor holder x 2
Fig. 4
P3: screw (2x10mm) x 4
P4: nut (M2) x 4
P5: tapping screw (3x7mm) x 34
P6: eyelet x 6
P7: gear (44T+0) with shaft (green) x 2
P8: gear (44T+0) with shaft (orange) x 4
P9: pinion gear 8T (white) x 2
P10: gear 48/18T (white) x 2
P11: gear 44/18T (blue) x 4
P12: clear tube x 2
Fig. 5
A: gear protection plates (2)
B: motor protection plates (2)
C: protection plates (4) for corner wheel/leg gears
D: gear brackets (2) for corner wheel/leg gears
E: gear brackets (2) for corner wheel/leg gears
F: motor mounting bracket (1)
G: top plate (1)
H: wheels (6)
I: legs (6)
J: rubber feet for legs (6)
KSR6 3 VELLEMAN


Produktspezifikationen

Marke: Velleman
Kategorie: Spielzeug
Modell: KSR6

Brauchst du Hilfe?

Wenn Sie Hilfe mit Velleman KSR6 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Spielzeug Velleman

Bedienungsanleitung Spielzeug

Neueste Bedienungsanleitung für -Kategorien-