Vaddio Device Controller Bedienungsanleitung

Vaddio Nicht kategorisiert Device Controller

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vaddio Device Controller (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Document 411-0046-30 Rev B
April 2020
Installation and User Guide
Vaddio Device Controller
Color Touch-Panel
999-42300-000 (Worldwide)
The Vaddio Device Controller is designed to easily access and control Vaddio devices through their web-
based user interfaces. It is compatible with any Vaddio device that has a modern web interface.
Unpacking
Be sure you receive the following items:
nVaddio Device Controller
nTabletop mount with feet and mounting hardware
Installation
In this connection diagram, the Vaddio Device Controller touch-panel is connected to the same PoE+
switch that powers an EasyIP Decoder and EasyIP 10 camera. The touch-panel will locate the camera and
decoder when it scans the subnet.
1. Connect the Cat-5e cable to the touch-panel's network/PoE port.
2. Secure the mount to the touch-panel using the four screws.
3. Optional: Place the self-adhesive feet on the mount.
4. Connect the cable to a data and power source, such as the PoE+ switch that powers the devices to be
controlled.
Setting Up the Touch-Panel
You will need to set up the touch-panel. Select Configuration, then enter and save a PIN for the tablet. You
will need to enter the PIN whenever you return to the Configuration page.
2
Vaddio Device Controller Tablet Installation and User Guide
Locating a Device to Control
If you don't know the IP address of the device you need to control, select Scan. The touch-panel
searches the subnet where it's connected, and displays the Vaddio devices it finds.
If you know the IP address of the device you need to control, enter it in the Vaddio Device IP box and
select Save.
Opening the Selected Device's Web Interface
When you have selected the device to control, select Exit (upper right corner of the screen) to go to the
selected device's web interface. You will need to log in to the device if guest access is not enabled.
The first time you access a device at a specific IP address, the screen may remain blank for 20 seconds or
more.
3
Vaddio Device Controller Tablet Installation and User Guide

Produktspezifikationen

Marke: Vaddio
Kategorie: Nicht kategorisiert
Modell: Device Controller
Touchscreen: Ja
Bildschirmdiagonale: 10 Zoll
Breite: 260.4 mm
Tiefe: 177.8 mm
Produkttyp: Besprechungsraumkonsole
Produktfarbe: Schwarz
Höhe: 28.6 mm
Energiequelle: PoE
Eingebauter Ethernet-Anschluss: Ja
Zertifizierung: CE, TAA
Anzahl: 1
Unterstützung von Positionierung: Tisch/Bank
Kompatible Produkte: EasyIP Ecosystem
Markenkompatibilität: Vaddio
Display-Auflösung: 1280 x 800 Pixel

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vaddio Device Controller benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Vaddio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-