Unify OpenStage M3 Bedienungsanleitung

Unify Telefon OpenStage M3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Unify OpenStage M3 (113 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/113
OpenStage M3/M3 Plus
OpenStage M3 Ex/M3 Ex Plus
on HiPath Cordless Enterprise 
HiPath 4000
Operating Instructions
A31003-M2000-U103-2-7619
Our Quality and Environmental Management Systems are
implemented according to the requirements of the ISO9001 and
ISO14001 standards and are certified by an external certification
company.

Copyright © Unify GmbH & Co. KG <06/2014>

Hofmannstr. 51, 81379 Munich/Germany
All rights reserved.
Reference No.: A31003-M2000-U103-2-7619
The information provided in this document contains merely general descriptions or
characteristics of performance which in case of actual use do not always apply as

described or which may change as a result of further development of the products.

An obligation to provide the respective characteristics shall only exist if expressly agreed in
the terms of contract.
Availability and technical specifications are subject to change without notice.
Unify, OpenScape, OpenStage and HiPath are registered trademarks of Unify GmbH & Co. KG.
All other company, brand, product and service names are trademarks or registered trademarks
of their respective holders.
unify.com
2 Safety notes
Safety notes
Using the OpenStage M3 Ex and
OpenStage M3 Ex Plus handsets in potentially
explosive working environments
This handset fulfils the requirements of the ATEX Directive and meets the required EN and IEC
standards (see the appendix in the operating manual). See also the notes in the declaration of con-
formity.
OpenStage M3 Ex and OpenStage M3 Ex Plus were designed for use in potentially explosive
working environments (Ex zones) and in compliance with fire prevention regulations. Local and
operational factors may lead to an explosive atmosphere in an Ex zone. Therefore, please observe
the following Ex safety notes:
Handset:
• The handset may only be operated in Ex zones where it is certified. Refer to the appendix
in the operating manual, the device identification and the EC type examination certificate.
A copy of the prototype verification certificate ZELM 08 ATEX 0379 X can be found in the
appendix of this operating manual.
• Users must check the handset for damage and verify that it is operating correctly before
using it in the Ex zone. A damaged handset or a handset that is not fully functional may
not be brought into or used in the Ex zone.
• The following requirements must be met to satisfy the Ex protection and IP rating IP 65
(casing protection) in an Ex zone:
– The battery compartment seal must not be damaged.
– The cover of the battery compartment must be tightly screwed on.
• Deactivate the handset immediately and remove it from the Ex zone if the following situa-
tions occur:
– You notice damage to the handset.
– If liquids have seeped into the handset.
• Repair a damaged handset immediately.
• Only service employees with Ex zone training and authorisation should repair and service
the handset.
• When swapping out a malfunctioning device/battery, the technician must return the mal-
functioning device/battery to the manufacturer while specifying the customer data.
• Inappropriate use of the handset will result in revocation of its certification for use in Ex
zones.
Battery pack:
• Only use the approved battery pack, see  Seite 104. Ex authorisation is only valid and
the handset can only be operated if this battery pack is installed. Other battery packs are
strictly prohibited. If they are used, Ex protection is no longer valid.
• Never open the handset battery compartment in an Ex zone. Battery pack removal, charg-
ing or transportation is not permitted in these zones.
Charging the battery pack:
• The battery pack may only be charged:
– Outside the Ex zone
– While inside the handset
– Using the supplied charging unit
• The charging unit should only be used outside the Ex zone.

Produktspezifikationen

Marke: Unify
Kategorie: Telefon
Modell: OpenStage M3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Unify OpenStage M3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Telefon Unify

Unify

Unify OpenStage M3 Bedienungsanleitung

7 August 2024
Unify

Unify OpenStage 40 HFA V3 Bedienungsanleitung

9 Mai 2023
Unify

Unify OpenStage 15 G HFA V3 Bedienungsanleitung

9 Mai 2023
Unify

Unify OpenStage 40 SIP Bedienungsanleitung

9 Mai 2023
Unify

Unify OpenStage M3 Ex Plus Bedienungsanleitung

9 Mai 2023
Unify

Unify OpenStage 40 G HFA V3 Bedienungsanleitung

9 Mai 2023
Unify

Unify OpenStage 20 T Bedienungsanleitung

9 Mai 2023
Unify

Unify OpenStage 60 SIP Bedienungsanleitung

9 Mai 2023
Unify

Unify OpenScape IP 35G Eco Bedienungsanleitung

9 Mai 2023
Unify

Unify OpenStage 15 Bedienungsanleitung

27 April 2023

Bedienungsanleitung Telefon

Neueste Bedienungsanleitung für -Kategorien-

Gigaset

Gigaset SL370 Bedienungsanleitung

15 Oktober 2024
Profoon

Profoon PDX-7020 Bedienungsanleitung

15 Oktober 2024
Profoon

Profoon PDX-100 Bedienungsanleitung

14 Oktober 2024
Uniden

Uniden XS 1415 Bedienungsanleitung

13 Oktober 2024
Uniden

Uniden XDECT 6105BTU Bedienungsanleitung

11 Oktober 2024
OnePlus

OnePlus 9RT 5G Bedienungsanleitung

9 Oktober 2024
Profoon

Profoon PDX-1520 Bedienungsanleitung

7 Oktober 2024
MT Logic

MT Logic TE-5740MTWG Bedienungsanleitung

7 Oktober 2024
D-Link

D-Link DI-102 Bedienungsanleitung

6 Oktober 2024
Belgacom

Belgacom Specifics 100 Bedienungsanleitung

5 Oktober 2024