Uniden EXP 2800 Bedienungsanleitung

Uniden Telefon EXP 2800

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Uniden EXP 2800 (12 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

Introduction

Controls and Functions

1. Handset earpiece

2. talk/batt LED - indicates when phone is in

use or the battery is low

3. talk - answers or places calls

4. */tone - switches to tone dialing in pulse

dial mode

5. redial - redials the last number

6. pause - adds a timed pause in a memory

dialing sequence

7. One-Touch Priority Keys

8. Handset Microphone

9. m - enters or recalls numbers in memory

10. flash - accesses call waiting (if available)

11. volume - sets both the ringer and earpiece

volumes

12. chan - selects another channel for clearer

reception

13. Battery Charging Contacts

14. Handset Retainer- holds handset in base for

wall mounting.

15. Status LED

16. page/find - locates the handset

The Uniden EXP2800 900 MHz cordless phones are designed and engineered to exacting standards for

reliability, long life, and outstanding performance.

▼ Features

• 900 MHz Extended Range Technology • Page/Find

• 10-Number Memory Dialing • AutoTalk™

• 40 Channel Autoscan • AutoStandby™

• Tone/Pulse Dialing • 7 Hours Talk Time

• Handset Volume Control • 14 days Standby Time

• 32 Digit Redial • Hearing Aid Compatible

The EXP2800 features include AutoTalk AutoStandbyand . AutoTalk allows you to answer a call by

just removing the handset from the base so you don’t have to waste time pushing buttons or flipping

switches. AutoStandby allows you to hang up by simply returning the handset to the base.

The UltraClear Plus™ true compander circuitry virtually eliminates background noise. This innovative

technology provides you with the best possible reception during all your conversations.

To protect you against misbilled calls which might result from your phone being activated by other

equipment, the EXP2800 has digital security which automatically selects one ofRandom Code™

approx. 65,000 digital security codes for the handset and base. Also, the AutoSecure™ feature

electronically locks your phone when the handset is in the base.

Be sure to visit our web site: www.uniden.com

Uniden®is a registered trademark of Uniden America Corporation.

AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of

Uniden America Corporation.

4) Place the handset on the base.

NOTE: Use only the Uniden Battery (BT-905) supplied with your phone. Replacement batteries are also

available through the Uniden Parts Department.

Battery use time (per charge)

From fully charged

• Seven hours continuous use

• Fourteen days when the handset is in the standby mode

Low Battery Alert

When the battery pack is very low and needs to be charged, the phone is programmed to eliminate

functions in order to save power. If the phone is not in use, the LED flashes when the batterytalk/batt

pack is low.

If the phone is in use, the LED flashes and the handset beeps. Complete your conversation astalk/batt

quickly as possible and return the handset to the base for charging.

NOTE: The last number dialed in the redial memory and the numbers stored in the memory locations

are retained for up to 1 minute while you replace the battery pack.

Cleaning the Battery Charging Contacts

To maintain a good charge, it is important to clean the battery

contacts on the handset and base unit with a dry cloth or a pencil

eraser about once a month.

Do not use any liquids or solvents.

NOTES:•Even when the battery pack is not being used, it will gradually discharge over a long period

of time. For optimum performance, be sure to return the handset to the base unit after each

telephone call.

• If you must replace the battery pack during a telephone call, complete the replacement within

30 seconds, and you can return to the original call.

C. Connect the base unit

1) Connect the AC adapter to the jack and aDC IN 9V

standard 120V AC wall outlet.

2) Set the base unit on a desk or tabletop, and place the

handset on the base unit as shown.

3) Then raise the antenna to a vertical position.

4) Make sure the LED lights. If the LED does not light,status

check to see that the AC adapter is plugged in and the

handset makes good contact with the base charging contacts.

NOTICE: Place the power cord so it does not create a trip hazard or where it

could become chafed and create a fire or electrical hazard.

NOTES:•Use only the supplied AD-310 AC adapter. Do not use any other

AC adapter.

• Connect the AC adapter to a continuous power supply.

• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

• The handset can be placed face up or face down in the base for charging.

Produktspezifikationen

Marke:	Uniden
Kategorie:	Telefon
Modell:	EXP 2800

Brauchst du Hilfe?

Wenn Sie Hilfe mit Uniden EXP 2800 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Telefon Uniden

Uniden XS 1415 Bedienungsanleitung

13 Oktober 2024

Uniden XDECT 6105BTU Bedienungsanleitung

11 Oktober 2024

Uniden EXA 7950 Bedienungsanleitung

2 Oktober 2024

Uniden D1880 Bedienungsanleitung

28 September 2024

Uniden EXI 7960 Bedienungsanleitung

21 September 2024

Uniden EZAI 2997 Bedienungsanleitung

20 September 2024

Uniden WDECT 2316 Bedienungsanleitung

20 September 2024

Uniden XC 610 Bedienungsanleitung

18 September 2024

Uniden EXI 8560 Bedienungsanleitung

14 September 2024

Uniden D1483 Bedienungsanleitung

14 September 2024

Bedienungsanleitung Telefon

Neueste Bedienungsanleitung für -Kategorien-

Gigaset SL370 Bedienungsanleitung

15 Oktober 2024

Profoon PDX-7020 Bedienungsanleitung

15 Oktober 2024

Profoon PDX-100 Bedienungsanleitung

14 Oktober 2024

OnePlus 9RT 5G Bedienungsanleitung

9 Oktober 2024

Profoon PDX-1520 Bedienungsanleitung

7 Oktober 2024

MT Logic TE-5740MTWG Bedienungsanleitung

7 Oktober 2024

D-Link DI-102 Bedienungsanleitung

6 Oktober 2024

Belgacom Specifics 100 Bedienungsanleitung

5 Oktober 2024

Mitel 5602 Bedienungsanleitung

5 Oktober 2024

Motorola L703C Bedienungsanleitung

5 Oktober 2024