Uniden EXAI8580 Bedienungsanleitung

Uniden Telefon EXAI8580

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Uniden EXAI8580 (17 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/17
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product.
If you have any questions or problems,
please do not return this product to the place of purchase.
Having Trouble?
Our customer care specialists are here to help you! Visit our website at www.
uniden.com or call our Customer Hotline at during 1-800-297-1023
regular business hours.*
Need a Part?
To order headsets, additional handsets, replacement batteries or other
accessories, visit our website at or call www.uniden.com 1-800-554-3988
during regular business hours.*
Help for our Special
Needs Customers
Uniden provides a customer service hotline for accessibility questions. If
you have disability and need customer service assistance or if you have any
questions about how Uniden's products can accommodate persons with
disabilities, please call the accessibility voice/TTY line:
1-800-874-9314 (voice or TTY).
Accessibility information can be found on our website, , www.uniden.com
under the "Accessibility" link. If your call is received outside of our business
hours, leave us a message and we will call you back.
* Central Standard Time. Detailed customer service hours are available at www.uniden.com.
©2007 Uniden America Corporation, Fort Worth, Texas.
Contains additional foreign articles.
Printed in China UCZZ01066BZ(0)
UNIDEN
CORDLESS
TELEPHONES
EXAI8580 Series
CUT
REMOTE OPERATION CARD
Remote access away from home
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press and enter your PIN code.[0]
The answering system announces the
number of messages stored in memory
and the voice prompts. The phone
stands by for you to enter a command.
3. To quit, hang up the phone.
Turn on the answering system
remotely
1. Call your phone and let it ring
10 times until it answers.
2. Press and enter your PIN code.[0]
3. Press then to stop the [0] [5]
announcement.
4. Press then to turn the [0] [6]
answering system on.
Remote Operation Card
1) Installing the Phone
1-1. Choosing the Best Location
To get the best performance out of your new phone, put it in the best location:
Near an AC outlet
and a telephone
wall jack.
• Microwave ovens
• Refrigerators
• Fluorescent
lighting
• Dust
• Excessive
moisture
• Other cordless
telephones
In a
centrally-located
open area.
PLACE YOUR BASE
• TVs
• Other electronics
• Direct sunlight
• Extreme temperatures
• Personal computers
• Wireless LAN
equipment
• Dust
• Excessive
moisture
• Areas with
a lot of
background
noise
• Shock
• Vibration
• Shock
• Vibration
TRY TO AVOID
Notes: For maximum range
Keep both the base and handset antennas free of obstruction.
When the handset is not in use, place the handset in an upright position.
Metal and reinforced concrete may aect cordless telephone performance.
•
•
•
1-2. Plug in the Battery
Use only the Uniden BT-905 rechargeable battery pack supplied with your phone.
1Locate the battery pack,
battery cover and handset. 2Line up the red and black wires
on the battery pack connector
with the sticker in the handset's
battery compartment.
3Place the cover over the
battery compartment and
slide it up into place.
Push the battery connector in firmly.
(You should hear it click into place.)
Red
Black
1Locate the battery pack,
battery cover and handset. 2Line up the red and black wires
on the battery pack connector
with the sticker in the handset's
battery compartment.
3Place the cover over the
battery compartment and
slide it up into place.
Push the battery connector in firmly.
(You should hear it click into place.)
Red
Black
1-3. Plug in the Base
Don’t put any power cord where it people might trip over it or step on it. If a power cord becomes chafed or
worn out, it can create a re or electrical hazard.
4Put the base's AC adapter cord through the hole in the stand
and connect the AC adapter to the jack.DC IN 9V
6
5
Connect the AC adapter to a standard 120V AC wall outlet.
DO NOT use an AC outlet controlled by a wall switch.
Route the cord
through the molded
wiring channel.
To AC outlet
AC adapter
(supplied)
To DC IN 9V
4Put the base's AC adapter cord through the hole in the stand
and connect the AC adapter to the jack.DC IN 9V
6
5
Connect the AC adapter to a standard 120V AC wall outlet.
DO NOT use an AC outlet controlled by a wall switch.
Route the cord
through the molded
wiring channel.
To AC outlet
AC adapter
(supplied)
To DC IN 9V
Note: For optimum battery life, charge your handset completely before you connect the telephone
cord. The rst time you charge a new battery, allow 15 to 20 hours.
1-4. Connect the Telephone Cord
Note: If the telephone cord does not t into your telephone wall jack, contact your local phone provider for
assistance.
If you receive high-speed internet service through your
telephone line (referred to as DSL), you should install
a DSL lter between the telephone base and the wall
jack. Standard telephones often can’t operate correctly
without a DSL lter.
Testing the connection
12 Make a quick test call, and then press to hang up.[END]
What if the call doesn't go through?
Try changing the dial mode (see below).
What if there is a lot of static?
Check the sources of interference described in section
1-1 on Choosing the best location: is the base near
any of those?
Changing from tone to pulse dialing (DIAL)
Your phone can communicate with the telephone network in two dierent ways: tone dialing or pulse dialing.
These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone
dialing.
If your phone company uses pulse dialing, you need to change your phone’s dial settings. If you don't get a dial
tone or can't connect to the telephone network, follow the steps below to modify your phone’s settings:
With the phone in standby, press and hold . [cid/menu]
Press to move the pointer to DIAL.[ ]
Press to set the phone to pulse dialing.[select/channel]
Press [END] put the handset back in the base and . The handset communicates the new setting to the
base.
Note: If you use pulse dialing and you need to send DTMF tones during a call (if you're using an automated
response system, for example), press to temporarily switch to tone dialing. When the call [ /tone/ ]
ends, the phone automatically returns to pulse dialing mode.
Now your phone is ready to use!
1)
2)
3)
4)
7
What if the charge LED doesn't
light up?
• Check AC adapter connection.
• Make sure you are not using
an outlet that's controlled by
a wall switch.
Place the handset in the base. Make sure that the
charge/in use LED
illuminates.
7
What if the charge LED doesn't
light up?
• Check AC adapter connection.
• Make sure you are not using
an outlet that's controlled by
a wall switch.
Place the handset in the base. Make sure that the
charge/in use LED
illuminates.
8Connect the telephone cord to the jack on the rear of the base.TEL LINE
10
9
Connect the telephone cord
to a telephone wall jack.
Route the cord through
the hole in the stand
and into the molded
wiring channel.
To telephone
wall jack
Telephone cord (supplied)
To TEL LINE
8Connect the telephone cord to the jack on the rear of the base.TEL LINE
10
9
Connect the telephone cord
to a telephone wall jack.
Route the cord through
the hole in the stand
and into the molded
wiring channel.
To telephone
wall jack
Telephone cord (supplied)
To TEL LINE
Telephone
wall jack
Telephone cord
DSL filter
Telephone
wall jack
Telephone cord
DSL filter
11 Pick up the handset from the base and press .[TALK/flash]
You should hear a dial tone, and the display should show TALK.
What if I can't hear a dial tone?
Check the telephone cord connection on the base.
What if the display doesn't show TALK?
Put the handset back in the base for at least five seconds.
Make sure the LED flashes.charge/in use
Talk 0:01
11 Pick up the handset from the base and press .[TALK/flash]
You should hear a dial tone, and the display should show TALK.
What if I can't hear a dial tone?
Check the telephone cord connection on the base.
What if the display doesn't show TALK?
Put the handset back in the base for at least five seconds.
Make sure the LED flashes.charge/in use
Talk 0:01

Produktspezifikationen

Marke: Uniden
Kategorie: Telefon
Modell: EXAI8580

Brauchst du Hilfe?

Wenn Sie Hilfe mit Uniden EXAI8580 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Telefon Uniden

Uniden

Uniden XS 1415 Bedienungsanleitung

13 Oktober 2024
Uniden

Uniden XDECT 6105BTU Bedienungsanleitung

11 Oktober 2024
Uniden

Uniden EXA 7950 Bedienungsanleitung

2 Oktober 2024
Uniden

Uniden D1880 Bedienungsanleitung

28 September 2024
Uniden

Uniden EXI 7960 Bedienungsanleitung

21 September 2024
Uniden

Uniden EZAI 2997 Bedienungsanleitung

20 September 2024
Uniden

Uniden WDECT 2316 Bedienungsanleitung

20 September 2024
Uniden

Uniden XC 610 Bedienungsanleitung

18 September 2024
Uniden

Uniden EXI 8560 Bedienungsanleitung

14 September 2024
Uniden

Uniden D1483 Bedienungsanleitung

14 September 2024

Bedienungsanleitung Telefon

Neueste Bedienungsanleitung für -Kategorien-

Gigaset

Gigaset SL370 Bedienungsanleitung

15 Oktober 2024
Profoon

Profoon PDX-7020 Bedienungsanleitung

15 Oktober 2024
Profoon

Profoon PDX-100 Bedienungsanleitung

14 Oktober 2024
OnePlus

OnePlus 9RT 5G Bedienungsanleitung

9 Oktober 2024
Profoon

Profoon PDX-1520 Bedienungsanleitung

7 Oktober 2024
MT Logic

MT Logic TE-5740MTWG Bedienungsanleitung

7 Oktober 2024
D-Link

D-Link DI-102 Bedienungsanleitung

6 Oktober 2024
Belgacom

Belgacom Specifics 100 Bedienungsanleitung

5 Oktober 2024
Mitel

Mitel 5602 Bedienungsanleitung

5 Oktober 2024
Motorola

Motorola L703C Bedienungsanleitung

5 Oktober 2024