Uniden DCX400 Bedienungsanleitung

Uniden Telefon DCX400

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Uniden DCX400 (8 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
Rechargeable battery
pack (BT-1018)
Charger AC adapter
(PS-0035) Battery cover
DCX400 accessory
handset and
charger
Belt clip
If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
Need Help? Get answers 24/7 at our website: .www.uniden.com
If You... Contact Uniden’s... Phone Number
have a question or problem Customer Care Line* 817-858-2929 or 800-297-1023
need a part or accessory Parts Department* 800-554-3988
need special assistance due
to a disability
Accessibility Help
Line
800-874-9314
(voice or TTY)
* During regular business hours, Central Standard Time. Visit our website for detailed
business hours.
Important Safety Precautions!
When using your telephone equipment, basic safety precautions should always be followed
to reduce the risk of re, electric shock and injury to persons, including the following:
Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or
laundry tub, in a wet basement or near a swimming pool.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a
remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a
re. They may explode. Check with local codes for possible special disposal instructions.
Do not place the handset in any charging cradle without the battery installed and the battery
cover securely in place.
SAVE THESE INSTRUCTIONS!
DCX400 Accessory Handset User's Guide
What's in the box?
2
Installing Your Handset
Charge the Battery
1. Unpack the handset, battery pack, and battery cover.
If the battery cover is already on the handset, press
in on the notch and slide the cover down and off.
2. Line up the battery pack connector with
the jack inside the handset. (The battery
connector will only fit one way.)
3. Push the battery pack connector in until it
clicks into place. Tug gently on the wires
to make sure the battery pack is securely
connected.
4. Place the cover over the battery
compartment and slide
it up into place.
5. Connect the AC adapter to the charger's
AC IN 8V
jack and set the plug into the
notch as shown. (This adapter might
already be connected.)
6. Plug the other end of the adapter into a
standard 120V AC power outlet.
7. Place the handset in the charger with
the display facing forward. The
ChArge
light should turn on.
If... Try...
the
ChArge
light does not
turn on
-reseating the handset.
-checking the AC adapter connection.
-seeing if the outlet is controlled by a wall switch.
Charge the handset completely (about 15 hours) before using it.
3
Registering to a Base
The accessory handset won't work until you register it to a base!
Compatible Bases
This handset is designed for use with Uniden's DECT4096, DECT4086 and DECT4066
bases. Other Uniden DECT6.0 bases might be compatible with this handset. For the
most up-to-date list of which bases this handset is compatible with, see our website.
Registration Methods
There are two different registration methods, but it's easy to figure out which one
applies to your handset and base. Answer the question to register the handset to
one of the compatible bases.
Does the handset fit in the base cradle?
Yes Place the handset in the base. The display should say
Handset Registering
.
No 1. On the base, open the menu and select
Register Handset
.
2. On the handset, press and hold
POUND #
until the handset display says
Handset Registering (
about 2 seconds).
After about 30 seconds, the handset display should say
Registration Complete
.
Test the connection
Pick up the handset and press
TALK
. Make sure you get a dial tone.
(Press
END
to hang up.)
If... Try...
-you don't hear a dial tone
-the display says
Registration Failed
Making sure the handset is fully
charged, then trying again.

Produktspezifikationen

Marke: Uniden
Kategorie: Telefon
Modell: DCX400

Brauchst du Hilfe?

Wenn Sie Hilfe mit Uniden DCX400 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Telefon Uniden

Uniden

Uniden XS 1415 Bedienungsanleitung

13 Oktober 2024
Uniden

Uniden XDECT 6105BTU Bedienungsanleitung

11 Oktober 2024
Uniden

Uniden EXA 7950 Bedienungsanleitung

2 Oktober 2024
Uniden

Uniden D1880 Bedienungsanleitung

28 September 2024
Uniden

Uniden EXI 7960 Bedienungsanleitung

21 September 2024
Uniden

Uniden EZAI 2997 Bedienungsanleitung

20 September 2024
Uniden

Uniden WDECT 2316 Bedienungsanleitung

20 September 2024
Uniden

Uniden XC 610 Bedienungsanleitung

18 September 2024
Uniden

Uniden EXI 8560 Bedienungsanleitung

14 September 2024
Uniden

Uniden D1483 Bedienungsanleitung

14 September 2024

Bedienungsanleitung Telefon

Neueste Bedienungsanleitung für -Kategorien-

Gigaset

Gigaset SL370 Bedienungsanleitung

15 Oktober 2024
Profoon

Profoon PDX-7020 Bedienungsanleitung

15 Oktober 2024
Profoon

Profoon PDX-100 Bedienungsanleitung

14 Oktober 2024
OnePlus

OnePlus 9RT 5G Bedienungsanleitung

9 Oktober 2024
Profoon

Profoon PDX-1520 Bedienungsanleitung

7 Oktober 2024
MT Logic

MT Logic TE-5740MTWG Bedienungsanleitung

7 Oktober 2024
D-Link

D-Link DI-102 Bedienungsanleitung

6 Oktober 2024
Belgacom

Belgacom Specifics 100 Bedienungsanleitung

5 Oktober 2024
Mitel

Mitel 5602 Bedienungsanleitung

5 Oktober 2024
Motorola

Motorola L703C Bedienungsanleitung

5 Oktober 2024