Uniden BP-100 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Uniden BP-100 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
1
BP-100
Accessory Battery Pack
For more exciting new products please visit our website:
Australia: w.uniden.com.auww
New Zealand: w.uniden.co.nzww
2
â—† If any items are missing or damaged, contact your place of purchase
immediately. Never use damaged products!
â—† Need help? Get answers at our website:
www.uniden.com.au for Australian model
www.uniden.co.nz for New Zealand model.
â—† Do not expose the device to flames or dispose of it in a fire: the battery
may explode.
â—† Do not disassemble, modify, or attempt to repair any component of this
product.
â—† This unit is waterproof. expose this unit to rain or NOT DO NOT
moisture.
â—† Use only the batteries indicated in this manual.
What’s in the Box?
â—† 2 Rechargeable Battery (BT-694)
â—† Battery Box
Install Battery
1. Remove the battery from any protective packaging and discard the
packaging accordingly. To remove the cover of the battery box, press in
on the notch and slide the cover down and off.
2. Line up the battery connector with the jack inside the battery box; the
connector only fits one way.
3. Push the connector in until it clicks into place; tug gently on the wires to
make sure the battery is securely connected.
4. Replace the cover and slide it into place.
IMPORTANT SAFETY INSTRUCTIONS
GETTING STARTED
#
You can install up to 3 battery packs.
3
Connect AC Adaptor to base
1. Use the AC Adaptor of a compatible base to connect the power jack on
the Battery Box to a regular indoor power outlet.
2. Use the power cable to connect to the DC IN port of a compatible base.
Test the Connection
Pick the handset (of a compatible unit) and press the relevant button (to
start a call - eg, HOME/FLASH). If you don’t hear a dial tone, check the
connection between the base and the Battery box.
Power LED
LED What it indicates
OFF No AC adaptor, No charged battery.
ON AC adaptor powered, one or more battery is charging, or
powered.
With AC Adaptor
Without AC Adaptor (During a Black Out)
Pick the handset (of a compatible unit) and press the relevant button (to
start a call - eg, HOME/FLASH). If you don’t hear a dial tone, check the
connection between the base and the Battery box.
#Battery box will charge under this condition.
#
Charge completely (about 24 hours) before using.
The BP-100 battery box is connected in-line between the base and AC
adaptor of a compatible telephone.


Produktspezifikationen

Marke: Uniden
Kategorie: Nicht kategorisiert
Modell: BP-100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Uniden BP-100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Uniden

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-