Uniden 1260 Bedienungsanleitung

Uniden Telefon 1260

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Uniden 1260 (1 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

Setting Up the Caller ID Menu

IMPORTANT: Do not plug the telephone into the wall jack

while setting up the Caller ID menu because an incoming call

may invalidate the information not yet saved.

1. Place the handset in the cradle on the base.

2. Press the menu button. appears in the display. SET OR 

3. Press either (+) or (-) button to scroll among the 7 menu  

screens, which are:

• SET   OR

• Local Area Code (default - - -)

• Regional AC’s-1 (default - - - - - - - - -)

• CID LANGUAGE (default English)

• SELECT CONTRAST (default 3)

• T/P DIAL MODE (default tone)

• EXIT SETUP

NOTE: You may press dial anytime to exit the Caller

ID Set Up menu. If no buttons are pressed within 10

seconds, the phone automatically exits the Caller ID

Set Up menu and returns to

the NO CALLS summary screen.

Local Area Code

The telephone uses the programmed area code to determine

the number format to display when a valid Caller ID signal is

received. It is also used for the Dialback feature.

1. Press the button. appears in the display. menu SET OR 

2. Press the (+) button until LOCAL AREA CODE:_ _ _ appears in

the display.

3. To enter or change the area code, press the button. The menu

display shows the area code stored in memory. The left-most

digit, or a minus sign (-)  ashes, indicating the unit is ready to

accept the area code entry.

4. Press the  (+) button and select a number from 0-9 in

ascending order.

Or press the  (-) button to select numbers from 9-0 in

descending order.

5. Press the menu button to advance to the next digit.

6. After the 3rd and last digits entered, press the menu button to

store the area code and go to the next setting.

NOTE: If you make a mistake, you can simply repeat

the previous steps until your area code is set.

Regional Area Codes for 10-Digit Dialing

Like the Local Area Code, the telephone uses the programmed

area codes to determine the number format to display when

a valid Caller ID signal is received. Calls that match any of the

programmed regional area codes are displayed as 10 digits. This

is helpful in areas that have multiple or overlapping area codes

and require 10-digit dialing.

1. Press the menu button. appears in the display. SET OR 

2. Press the  (+) button until REGIONAL AC’S-1: _ _ _ _ _ _ _

shows in the display.

3. To enter or change the area code, press the button. The menu

display shows the area code stored in memory. The left-most

digit, or minus sign (-),  ashes, indicating the unit is ready to

accept the area code entry.

4. Press the  (-) button, and select a number from 9-0 for the

 rst digit of the are code.

5. When the desired digit is  ashing, press the (+) button to 

advance to the next digit.

6. Press the menu button again to enter the next three-digit

regional area code and repeat steps 4 and 5 until all the

REGIONAL AC’S-1 (RAC#1) and REGIONAL AC’S-2 (RAC#1)

are entered. A total of 6 sets of Regional Area Codes may be

entered.

7. Press the button to store the setting and return to the menu

REGIONAL AREA CODE display.

8. Press dial to exit.

CID Language

This setting allows you to display Caller ID display prompt

messages in English, French or Spanish.

1. Press the button. appears in the display. menu SET OR 

2. Press the (+) button until CID LANGUAGE appears in the

display.

3. Press the button to show the current language setting. menu

The default is English.

4. Press the (+) or (-) button to change the language.  

5. Press the menu button to store the language and return to the

CID LANGUAGE display.

Select Contrast

This adjustment allows you to select the contrast of the display.

1. Press the menu button until appears. SET OR 

2. Press the (+) button until SELECT CONTRAST appears in the

display.

3. Press the button to show the current contrast setting. menu

There are 5 levels of contrast, with the default set to 3.

4. To decrease the contrast, press (-). To increase the contrast, 

press (+). 

5. Press the button to store the contrast setting and return menu

to the SELECT CONTRAST display.

T/P Dial Mode

This adjustment allows you to select Tone (touch-tone) or Pulse

(rotary) dialing.

1. Press the button until appears. menu SET OR 

2. Press the (+) button until appears in the T/P DIAL MODE

display.

3. Press the menu button to show the current dial mode. The

default is set to tone.

4. To change the dialing mode, press the   (+) or (-) button.

The display will alternate between the two dialing modes.

5. Press the button to store the dialing mode and return to the menu

T/P DIAL MODE display.

Exit Setup

To immediately exit the setup mode, select the EXIT SETUP menu

and press the button. menu

REMINDER: The time and date is programmed

automatically when the  rst Caller ID record is

successfully received after the unit is setup.

Hearing Aid Compatibility (HAC)

This telephone system meets FCC standards for Hearing Aid

Compatibility.

Licensing

Licensed under US Patent 6,427,009.

Introduction

CAUTION: When using telephone equipment,

there are basic safety instructions that should

always be followed. Refer to the IMPORTANT

SAFETY INSTRUCTIONS provided with this

product and save them for future reference.

Before You Begin

Parts Checklist

Make sure your package includes the following items:

1. Press button while the handset is still in the cradle. dial

2. Press the (+) or   (-) buttons for the desired memory

location, lift the handset and the number dials automatically.

Reviewing Numbers Stored in Memory

1. Press the button. store

2. Press 0-9 for the memory location. The number shows on the

display.

Copy Caller ID Memory to User Memory

1. Pickup the handset.

2. Press the (+) or (-) buttons to display the number you  

want to copy.

3. Press the button. store

4. Press 0-9 for the memory location. The display  ashes if the

memory location is occupied.

5. Press the store button twice to replace the new information

with the old, or press the (+) or (-) buttons to select an  

empty location. The number is automatically stored.

6. Press the hook switch to exit.

Copy Redial Memory to User Memory

1. Pickup the handset.

2. Press store.

3. Press 0-9 for the memory location. Press the   (+) or (-)

buttons to select a diﬀ erent location. The display  ashes if the

memory location is occupied.

4. Press the store button again to con rm.

5. Press the redial store button, and then press the button again.

6. Press the  ash button or the hook switch to exit.

Storing a Pause in Memory

The redial button has dual functionality. It becomes a pause but-

ton if the store button is pressed  rst. It is valid only when storing

a number into memory. Use the redial button to insert a pause

when a delay is needed in an automatic dialing sequence. For

example, when you must dial a 9 to get an outside line, or when

you enter codes to access your long distance company. You may

need to adjust the length of the pause. It can be adjusted from 1

to 9 seconds. The default setting is 4 seconds.

1. Pickup the handset.

2. Press the button. store

3. Press the button. redial

4. Press 1-9 (1 = 1 second, 2 = 2 seconds, etc.)

5. Press again. store

6. Press the  ash button or the hook switch to exit.

Chain Dialing

This process allows you to dial a succession of stored numbers

from separate memory locations. This is useful when you must

dial several sequences of numbers, such as with frequent calls via

a telephone company long distance provider.

For example Memory location

Local access number of long distance company 6

Authorization code (ID) 7

Long distance phone number 8

1. Pick up the handset.

2. Press the button and then press 6. mem

3. When you hear the access tone, press the button and mem

then press 7.

4. At the next access tone, press the mem button and then 8.

TIP: Wait for the access tones before pressing the next

mem button, or your call may not go through.

Using Flash

This feature is used to activate customer calling services available

through your local phone company, such as Call Waiting. These

services generally require an extra monthly fee. If you subscribe

to any of these services, please refer to the phone company’s

instructions on how to use  ash.

To answer an incoming call while having a conversation:

• After you hear the Call Waiting tone, press and release the

 ash button. The  rst call is placed on hold while the second

call can be answered.

To return to your  rst call and put the second call on hold:

• Press and release  ash again. The  rst call can continue while

the second call is put on hold.

Using Temporary Tone Dialing

If you have pulse service, you can temporarily change from pulse

to tone service. After dialing the telephone number, press and

release the *tone button on the telephone. This allows access to

phone services that require a tone, such as banking and long-

distance services. After you hang up the handset, the telephone

automatically returns to pulse service.

Caller ID Display Messages

The following special messages indicate the status of a message

or the unit:

NO CALLS The caller memory is empty.

UNKNOWN NAME The incoming call does not have Caller ID

service or their service area is not linked

to yours. If the screen displays UNKNOWN

NAME along with a calling number, the

name information for that number was not

available.

Battery power level is low. Please replace

the batteries as soon as possible in order to

maintain Caller ID operation.

PRIVATE NAME The incoming caller is registered as “Private

Number” and Caller ID information is

withheld.

START/END You are at the beginning or the end of the

Caller ID memory log.

REPT Repeat call message, indicates that a new

call from the same number was received

more than once.

Equipment Approval Information

Your telephone equipment is approved for connection to the Public

Switched Telephone Network and is in compliance with parts 15 and 68,

FCC Rules and Regulations and the Technical Requirements for

Telephone Terminal Equipment published by ACTA.

1. Noti cation to the Local Telephone Company

On the bottom of this equipment is a label indicating, among other

information, the US number and Ringer Equivalence Number (REN) for

the equipment. You must, upon request, provide this information to

your telephone company.

The REN is useful in determining the number of devices you may

connect to your telephone line and still have all of these devices ring

when your telephone number is called. In most (but not all) areas,

the sum of the RENs of all devices connected to one line should not

exceed 5. To be certain of the number of devices you may connect

to your line as determined by the REN, you should contact your local

telephone company.

A plug and jack used to connect this equipment to the premises wiring

and telephone network must comply with the applicable FCC Part 68

rules and requirements adopted by the ACTA. A compliant telephone

cord and modular plug is provided with this product. It is designed to

be connected to a compatible modular jack that is also compliant. See

installation instructions for details.

Notes

• This equipment may not be used on coin service provided by the

telephone company.

• Party lines are subject to state tariﬀ s, and therefore, you may not be able

to use your own telephone equipment if you are on a party line. Check

with your local telephone company.

• Notice must be given to the telephone company upon permanent

disconnection of your telephone from your line.

• If your home has specially wired alarm equipment connected to the

telephone line, ensure the installation of this product does not disable

your alarm equipment. If you have questions about what will disable

alarm equipment, consult your telephone company or a quali ed

installer.

US Number is located on the cabinet bottom.

REN Number is located on the cabinet bottom.

2. Rights of the Telephone Company

Should your equipment cause trouble on your line which may

harm the telephone network, the telephone company shall, where

practicable, notify you that temporary discontinuance of service

may be required. Where prior notice is not practicable and the

circumstances warrant such action, the telephone company may

temporarily discontinue service immediately. In case of such

temporary discontinuance, the telephone company must: (1)

promptly notify you of such temporary discontinuance; (2) aﬀ ord you

the opportunity to correct the situation; and (3) inform you of your

right to bring a complaint to the Commission pursuant to procedures

set forth in Subpart E of Part 68, FCC Rules and Regulations.

The telephone company may make changes in its communications

facilities, equipment, operations or procedures where such action is

required in the operation of its business and not inconsistent with

FCC Rules and Regulations. If these changes are expected to aﬀ ect

the use or performance of your telephone equipment, the telephone

company must give you adequate notice, in writing, to allow you to

maintain uninterrupted service.

Interference information

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference; and (2) This device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation.

Privacy of Communications may not be ensured when using this product.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment o and

on, the user is encouraged to try to correct the interference by one or

more of the following measures: • Reorient or relocate the receiving

antenna (that is, the antenna for radio or television that is “receiving” the

interference).

• Reorient or relocate and increase the separation between the

telecommunications equipment and receiving antenna.

• Connect the telecommunications equipment into an outlet on a circuit

diﬀ erent from that to which the receiving antenna is connected.

If these measures do not eliminate the interference, please consult your

dealer or an experienced radio/television technician for additional

suggestions. Also, the Federal Communications Commission has

prepared a helpful booklet, “How To Identify and Resolve Radio/TV

Interference Problems.” This booklet is available from the U.S.

Government Printing Oﬃ ce, Washington, D.C. 20402. Please specify stock

number 004-000-00345-4 when ordering copies.

Notice: The changes or modi cations not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

Telephone Basics

Connecting the Telephone Line

1. Plug the long straight line cord into a modular wall telephone

jack.

2. Place the handset in the cradle.

NOTE: The unit is properly installed if you pick up the

handset and hear the dial tone. Otherwise, recheck all

the installation steps.

Wall Mount Installation

Your telephone may also be mounted on a wall plate (not in-

cluded).

NOTE: To prevent the handset from falling out of the

cradle while the phone is hanging on the wall, you

must reverse the handset hook (located on the base).

1. Push the handset hook up and out of the slot on the base with

your thumb, rotate the hook 180°, and replace it back in the

slot.

2. Feed the line cord through the groove and wrap the cord

around the track on the bottom of the base.

3. Feed the line cord through the groove on the opposite side of

the track, and plug the end into the modular telephone jack.

4. Slip the mounting holes (on the bottom of the base) over the

wall plate posts and  rmly slide the unit down into place.

Adjusting the Ringer Volume

You may control the ringer volume level with the switch located

on the side of the base.

Adjusting the Volume

You may control the listening level with the VOLUME switch,

which has three levels. It remains at the last level set until you

change it.

Redialing a Number

If you want to call the last number you dialed again (up to 32

digits), use the redial feature.

1. Pick up the handset.

2. Press the button. redial

3. The last number called is automatically redialed.

Using One Touch Redial

If the last call you dialed was busy, you can redial it immediately

by just pressing the redial button and without hanging up the

handset.

Caller ID (CID)

IMPORTANT: In order to use this unit’s Caller ID

features, you must subscribe to either the standard

Name/Number Caller ID Service or Call Waiting Caller

ID Service. To know who is calling while you are on the

phone, you must subscribe to Call Waiting Caller ID

Service.

This unit receives and displays information transmitted by your

local phone company. This information can include the phone

number, date, and time; or the name, phone number, date, and

time.

Call Waiting Caller ID

Provided you subscribe to Call Waiting Caller ID service form

your phone company; if you receive an incoming call and you

are using Uniden’s multi handset system, a beep indicates the

presence of a Call Waiting call on the line. The Call Waiting Caller

ID information will be displayed and stored in the history of all

handsets in the system.

• When you hear the call waiting beep in the handset receiver,

press the  ash button to put the current call on hold and

answer the incoming call. Press  ash again to return to the

original call.

Receiving CID Records

When you receive a call, the Caller ID information is transmitted

between the  rst and second ring. The Caller ID information

appears on the display while the phone rings, giving you a

chance to monitor the information and decide wheather or not to

answer the call.

Storing CID Records (In CID Memory)

If you are not at home or cannot answer, your telephone’s Caller

ID memory stores the data for the 50 most recent calls you

received so you can see who called while you were unavailable.

When the 51st call is received, the oldest Caller ID record (1st call)

is automatically deleted.

You may review the stored information at any time. Calls received

since your last review show as NEW in the display. Calls that have

not been previously reviewed but were received from the same

number more than once show as REPT in the display.

Reviewing CID Records

As calls are received and stored, the display is updated to let you

know how many calls have been received. To scroll CID records:

1. Press either the (+) or   (-) down button to view the

newest call record.

2. Press the  (-) button to scroll through the call records from

the most recent to the oldest.

3. Press the  (+) button to scroll through the call records from the

oldest to the newest.

4. When all of the messages have been viewed, START/END

appears in the display.

Deleting CID Records

• To delete the record showing in the display, press the delete

button once.

• To delete all records while reviewing, press and hold the

delete button until shows in the display, then ERASE ALL?

press the button again to con rm. delete

Dialing Back

When reviewing Caller ID records, you may dialback the phone

numbers

shown on the display by pressing the dial button.

NOTE: Depending on (a) how the incoming caller’s

phone number is formatted when it is received, and

(b) whether or not you previously pre-programmed

your local area code into the set up menu, you may

need to adjust the format of the incoming caller’s

stored phone number before making the call, press

the dial button to adjust the number, and try again.

If you programmed your local area code in the setup menu

1. Use the   (+) and (-) buttons to scroll to the number you

want to dial.

• If you see a number with 7 digits (i.e. 555-1234), then the call

was received from within your area code. However, this does

not guarantee the call is a local call.

• If you see a number with 11 digits (i.e. 1-234-555-1234), then

the call received was not from your area code.

2. Press the button and the display shows or dial PICKUP ADJUST.

A 10 second timer also starts in the upper right side of the

display, letting you know the time remaining until the unit

returns to the Summary Screen. If you adjust the number to be

dialed, the timer automatically resets itself.

3. To adjust the phone number, press the dial button. For

instance, a 7-digit local number sometimes cannot be dialed

because it requires a 10-digit or 11-digit format. Press the dial

button repeatedly to scroll through the 7, 10, and 11-digit

numbers.

7-digits: 7-digit telephone number (i.e.

555-5555)10-digits:

3-digit area code + 7-digit telephone number

(i.e. 425-555-5555)

11-digits: long distance code 1 + 3-digit area code +

7-digit telephone number

(i.e. 1-425-555-5555)

4. To dial the displayed number, pick up the handset before the

timer reaches 0. NOW DIALING shows in the display and the

number is dialed.

If you did not program your local area code in the setup menu

1. Use the   (+) and (-) buttons to display the number you

want to dial.

You will only see 10-digit numbers (i.e. 234-555-1234).

2. See steps 2 through 4 in the above section to complete the

dialback sequence.

NOTE: If PICKUP PHONE shows on the display, no other

changes to the number can be made. The information

sent from the telephone company is known to be a

valid number to dial back (available only in limited

areas). Once you pickup the phone, the number is

automatically dialed.

Memory

Before you store a telephone number in memory, make sure the

dialing mode is correctly set for the type of service you have. The

default dialing mode is tone (touch-tone), so if you have pulse

(rotary) service, you must  rst change the dialing mode. See “T/P

Dial Mode.”

Storing Frequently Called Numbers

1. Pick up the handset.

2. Press the store button.

3. Push the desired memory location button (0-9).

4. Press the store button.

5. Use the handset number keys to enter the telephone number

(up to 16- digits) and press the store button.

6. Hang up the handset.

NOTE: If you make a mistake, use the delete button to

delete wrong digits.

Changing a Stored Number

Repeat the storage sequence above. The new number replaces

the old number at the memory location.

Erasing a Stored Number

1. Pick up the handset.

2. Press the button. mem

3. Press the (+) or   (-) buttons for the desired memory loca-

tion to be erased.

4. Press and hold delete for three seconds until the number in

the display is erased.

5. Hang up the handset.

NOTE: If you want to erase more than one location,

use the (+) or arrow buttons to scroll to each   (-)

memory location you want to erase.

Dialing Frequently Called Numbers

1. Pick up the handset and press the mem button.

2. Press 0-9 for the memory location. The number dials

automatically.

1. Pick up the handset and press the dial button.

2. Press the (+) or   (-) buttons for the desired memory

location.

3. Press the button to dial the number. dial

Model 1260

Printed in China

Uniden America Corporation

Ft. Worth, TX

Model 1260 Slimline

Memory phone

User’s guide

Modular

telephone

line jack

Wall plate

Telephone Jack Requirements

To use this phone, you need an RJ11C type

modular telephone jack, which might look like

the one pictured here, installed in your home.

If you don’t have a modular jack, call your

local phone company to  nd out how to get

one installed.

Important Installation Information

• Never install telephone wiring during a lightning storm.

• Never install telephone jacks in wet locations unless the jack is

speci cally designed for wet locations.

• Never touch non-insulated telephone wires or terminals,

unless the telephone line has been disconnected at the

network interface.

• Use caution when installing or modifying telephone lines.

Handset Layout

SE E M ARKIN G ON BOTTOM / B A CK OF PR ODU CT

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO

PREVENT FIRE OR

ELECTRICAL SHOCK

HAZARD, DO NOT

EXPOSE THIS

PRODUCT TO RAIN

OR MOISTURE.

THE LIGHTNING

FLASH AND ARROW

HEAD WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

“DANGEROUS

VO AGE” INSIDELT

THE PRODUCT.

CAUTION: TO REDUCE THE

RISK ELECTRIC HOCK, OF S DO

NOT REMOVE COVER (OR

BACK). NO USER

SERVICEABLE ARTS NSIDE.P I

REFER SERVICING TO

QUALIFIED SERVICE

PERSONNEL.

THE EXCLAMATION

POINT WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

IMPORTANT

INSTRUCTIONS

ACCOMPANYING

THE PRODUCT.

CAUTION:

Visit our Website at : www.uniden.com

= ringer tone will be loud

= ringer tone will be low

= telephone will not ring

Name of Store

Purchase Date

CALL WAITING

If you subscribe to Call Waiting

Caller ID Service, this icon

 ashes when you receive a call while you

are on the phone.

Installing and Replacing the Batteries

IMPORTANT: You will have approximately 60 seconds

to replace the batteries before the memories stored

in the handset are lost. Please read the instructions

before replacing the batteries and have the batteries

ready to be inserted beforehand. As a precaution, you

may want to write down any stored information you

do not want erased.

Your Caller ID phone uses 3 AA-size alkaline batteries for

receiving and storing Caller ID records and for the numbers you

use for memory dialing.

1. If the telephone line cord is connected, disconnect it from the

wall.

2. Open the battery compartment door with your  nger or

thumb.

3. Insert 3 AA-size alkaline batteries (not included) as shown on

the diagram inside the compartment.

4. Replace the battery compartment door.

5. Re-attach the line cord to the wall and check your memory

locations. If installation takes longer than 60 seconds, you

should re-set your memory locations.

IMPORTANT: If you’re not going to use the telephone

for more than 30 days, remove the batteries because

they can leak and damage the unit.

NEW Indicates call of calls have not been

reviewed.

Troubleshooting Tips

No Dial Tone

• Check all cabling to make sure that all connections are secure

and not damaged.

• Check hook switch: Does it fully extend when handset is lifted

from cradle?

No Display

• Replace the batteries.

• Make sure the batteries are properly installed.

No Information is shown after the phone rings

• In order to receive Caller ID records, you must subscribe to the

standard name and number Caller ID service available through

your local telephone company.

• Be sure to wait until the second ring before answering.

Phone does not ring

• Make sure ringer switch is set tothe or .

• You may have too many extension phones on your line. Try

unplugging some extension phones.

• Check for dial tone. See Troubleshooting Tips for No Dial Tone.

Other parties cannot hear you

• Make sure phone cord is securely plugged in.

• Make sure extension phones are on the hook at the same time

you’re using the phone. It’s normal for the volume o drop t

when additional extension phones are used at the same time.

Cannot dial out

• Make sure the T/P dialing mode is set to the type of phone

service you are subsc ed to.rib

Service

If trouble is experienced with this equipment, for repair or

warranty information, please contact customer service at 1-800-

297-1023. If the equipment is causing harm to the telephone

network, the telephone company may request that you

disconnect the equipment until the problem is resolved.

This product may be serviced only by the manufacturer or

its authorized service agents. Changes or modi cations not

expressly approved by Uniden America Corporation could void

the user’s authority to operate this product. For instructions on

how to obtain service, refer to the warranty included in this guide

or call customer service at 1-800-297-1023.

Or refer inquiries to:

Uniden America Service

4700 Amon Carter Blvd.

Forth Worth, TX 76155

Attach your sales receipt to the booklet for future reference or jot

down the date this product was purchased or received as a gift.

This information will be valuable if service should be required

during the warranty period.

Industry Canada (I.C.) Notice

Terminal equipment

NOTICE: This equipment meets the applicable Industry Canada

Terminal Equipment Technical Speci cations. This is con rmed

by the registration number. The abbreviation, IC, before the

registration number signi es that registration was performed

based on a Declaration of Conformity indicating that Industry

Canada technical speci cations were met. It does not imply that

Industry Canada approved the equipment.

NOTICE: The Ringer Equivalence Number (REN) for this terminal

equipment is marked on the equipment itself. The REN assigned

to each terminal equipment provides an indication of the

maximum number of terminals allowed to be connected to a

telephone interface. The termination on an interface may consist

of any combination of devices subject only to the requirement

that the sum of the Ringer Equivalence Numbers of all the

devices does not exceed  ve.

One-year limited warranty

IMPORTANT: Evidence of original purchase is required for

warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION

(“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one

year, to the original retail owner, this Uniden Product to be

free from defects in materials and craftsmanship with only the

limitations or exclusions set out below.

WARRANTY DURATION: This warranty to the original user shall

terminate and be of no further eﬀ ect 12 months after the date

of original retail sale. The warranty is invalid if the Product is

(A) damaged or not maintained as reasonable or necessary,

(B) modi ed, altered, or used as part of any conversion kits,

subassemblies, or any con gurations not sold by Uniden, (C)

improperly installed, (D) serviced or repaired by someone

other than an authorized Uniden service center for a defect

or malfunction covered by this warranty, (E) used in any

conjunction with equipment or parts or as part of any system

not manufactured by Uniden, or (F) installed or programmed

by anyone other than as detailed by the owner’s manual for this

product.

STATEMENT OF REMEDY: In the event that the product does

not conform to this warranty at any time while this warranty

is in e ect, warrantor will either, at its option, repair or replace

the defective unit and return it to you without charge for parts,

service, or any other cost (except shipping and handling)

incurred by warrantor or its representatives in connection with

the performance of this warranty. Warrantor, at its option, may

replace the unit with a new or refurbished unit. THE LIMITED

WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE

WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF

AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE

WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY

OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY

IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR

PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES.

Some states do not allow this exclusion or limitation of incidental

or consequential damages so the above limitation or exclusion

may not apply to you.

LEGAL REMEDIES: This warranty gives you speci c legal rights,

and you may also have other rights which vary from state to

state. This warranty is void outside the United States of America

and Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF

WARRANTY: If, after following the instructions in the owner’s

manual you are certain that the Product is defective, pack the

Product carefully (preferably in its original packaging). The

Product should include all parts and accessories originally

packaged with the Product. Include evidence of original purchase

and a note describing the defect that has caused you to return

it. The Product should be shipped freight prepaid, by traceable

means, to warrantor at:

Uniden America Service

4700 Amon Carter Blvd.

Fort Worth, TX 76155

Handset Back volume

switch

display

(button)

delete

(button)

dial (button)

*tone

(button)

mem

(memory button)

 (+)/ (-)

(buttons)

store

(button)

 ash

(button)

redial (button)

Ringer

Volume

Battery compartiment

New calls

Current time Current date

Caller ID

number

Caller ID

name

Produktspezifikationen

Marke:	Uniden
Kategorie:	Telefon
Modell:	1260
Anzahl der Farben des Displays:	Monochrom
Freisprecheinrichtung:	Ja
Anrufer-Identifikation:	Ja
Gewicht:	453 g
Produktfarbe:	Weiß
Befestigungstyp:	Wand
Gleichstrom-Anschluss (DC):	Ja
Lautstärkeregler:	Digital
Telefonbuch Kapazität:	- Eintragungen
Anrufbeantworter:	Nein
Typ:	DECT-Telefon
Betriebsanleitung:	Ja
Abmessungen (BxTxH):	101 x 76 x 228 mm
Wandmontage:	Ja
Drahtlose Verbindung:	Ja