Trust Gamer Network Kit PCI Bedienungsanleitung

Trust Netzwerkkarte/Adapter Gamer Network Kit PCI

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Trust Gamer Network Kit PCI (5 Seiten) in der Kategorie Netzwerkkarte/Adapter. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/5
Trust Gamer Kit PCI
1
GB
TRUST GAMER KIT PCI
Quick Installation Manual
Version 1.0
Trust Gamer Kit PCI
2
1. Introduction
The instruction manual is intended for users of the Trust Gamer Kit PCI. Some knowledge of
computers is necessary to install this product. If you have any questions, please consult one of
the Trust Customer Care Centers. You can find more information at the back of this instruction
manual.
This instruction manual describes how to install the software and how to solve problems that may
be encountered during the installation.
A detailed instruction manual for this product is contained on the CD-ROM. See chapter 3 for
instructions on how to read this manual.
2. Installation
Note: Files will be copied from the original Windows CD-ROM during installation.
Make sure that you use the same Windows CD-ROM that you used to install
Windows, otherwise Windows may no longer work.
2.1 Installing the network card
Note: Do not carry out any maintenance on your computer whilst it is switched on.
Prevent personal injury and damage to the device by removing the
computer's power plug from the wall socket.
Note: Install the drivers for the network card before connecting it to the network.
See chapter 2.2.
1. Turn off your PC.
2. Remove the plug from the wall socket.
3. Remove the computer casing (if necessary, read your computer's instruction manual).
4. Remove the metal cover plate from the PCI slot.
5. Insert the network card into the free PCI slot and screw the card firmly into place.
6. Close the PC.
7. Turn on the computer.
2.2 Installing the driver
Operating system 10MB network card
(RTL8029x)
100MB network card
(RTL8139x)
Windows 95 D:\RTL8029\WIN95 D:\RTL8139\WIN95
Windows 98 D:\RTL8029\WIN98 D:\RTL8139\WIN98
Windows NT 4 D:\RTL8029\WINNT D:\RTL8139\WINNT4
Windows 2000 Standard Windows 2000 driver D:\RTL8139\WIN2000
Table 1: Summary of drivers
2.2.1 Windows 95, 98 and 2000
1. Start Windows.
2. A network card will be detected automatically. Click on 'Next'.
3. Insert the CD-ROM containing the drivers into your CD-ROM drive.
Trust Gamer Kit PCI
3
GB
4. Select Windows to search in a specific location. Give the location as shown in table 1.
Click on <Enter>.
5. The driver will be found. Follow the on-screen instructions to complete the installation.
6. Restart your computer.
A more detailed description of the installation and use of this product and how to set protocols
can be found in the instruction manual included on the CD-ROM. See chapters 7 to 10 for more
information. If necessary, also refer to your computer's instruction manual.
2.2.2 Windows NT 4.0
1. Start Windows NT and log on as ‘Administrator’.
2. Insert the CD-ROM containing the drivers into your CD-ROM drive.
3. Double click on the ‘Network’ icon in the ‘Control Panel’.
4. Select the 'Adapters' tab and click on 'Add'.
5. Click on 'Have Disk...'.
6. Give the location as shown in table 1. Click on 'OK'.
7. Select the adapter and click on 'OK' to continue. Click on 'Next' to continue.
8. Follow the on-screen instructions to complete the installation.
9. Restart Windows NT4 after completing the installation.
A more detailed description of the installation and use of this product and how to set protocols
can be found in the instruction manual included on the CD-ROM. See chapters 7 and 9 for more
information. If necessary, also refer to your computer's instruction manual.
2.3 Connecting to a network
1. Remove the network cable from the packaging.
2. Connect one end to the network card of computer 1.
3. Connect the other end to the network card of computer 2.
3. Acrobat Reader
3.1 Reading the electronic manual
1. Start the Trust Software Installer (Start – Run – [D:\Setup.exe]).
2. Select 'Read manual'.
3. Select the language you wish to use to read the manual.
4. The manual will be displayed on the monitor.
3.2 Printing the manual
1. Click on ‘Print’ in the ‘File’ menu (see figure 1).

Produktspezifikationen

Marke: Trust
Kategorie: Netzwerkkarte/Adapter
Modell: Gamer Network Kit PCI

Brauchst du Hilfe?

Wenn Sie Hilfe mit Trust Gamer Network Kit PCI benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Netzwerkkarte/Adapter Trust

Trust

Trust 18187 Bedienungsanleitung

10 August 2024
Trust

Trust Gamer Network Kit PCI Bedienungsanleitung

20 Juli 2024
Trust

Trust eeWave Wireless Bluetooth Audio Link Bedienungsanleitung

19 Juli 2024

Bedienungsanleitung Netzwerkkarte/Adapter

Neueste Bedienungsanleitung für -Kategorien-

Devolo

Devolo MicroLink dLAN duo Bedienungsanleitung

16 Oktober 2024
Edimax

Edimax HP-5001K Bedienungsanleitung

16 Oktober 2024
Edimax

Edimax EW-7822ULC Bedienungsanleitung

9 Oktober 2024
TRENDnet

TRENDnet TEW-624UB Bedienungsanleitung

5 Oktober 2024
NEC

NEC NP06LM Bedienungsanleitung

4 Oktober 2024
Alecto

Alecto HPD-142 Bedienungsanleitung

4 Oktober 2024
StarTech.com

StarTech.com ST1000SPEX2T Bedienungsanleitung

3 Oktober 2024
StarTech.com

StarTech.com ST1000SPEX2LT Bedienungsanleitung

3 Oktober 2024
LevelOne

LevelOne WUA-1610 Bedienungsanleitung

3 Oktober 2024
Tenda

Tenda W311MA Bedienungsanleitung

2 Oktober 2024