Tripp Lite UPB-12K0-S2X2U Bedienungsanleitung

Tripp Lite powerbank UPB-12K0-S2X2U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite UPB-12K0-S2X2U (16 Seiten) in der Kategorie powerbank. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
Owner’s Manual
12,000mAh Dual Port
Mobile Power Bank with
Auto-Sensing Ports
Model: UPB-12K0-S2X2U
Español 5 • Français 9 • Русский 13
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
17-05-361-9336EC.indb 1 6/7/2017 1:39:19 PM
2
General Safety Instructions
Package Contents
Product Features
• Make sure the power bank is fully charged prior to use.
• Please use a cable suitable for your device when charging it with the power bank.
•
When charging the power bank, it is recommended you use the included USB Micro-B cable.
• Under a low-battery condition, the LEDs will turn off while charging a device. Recharge
the power bank as soon as possible to avoid shortening the battery life.
•
The battery should be charged at least every three months to avoid shortening the battery life.
• It is recommended to disconnect the charging device upon being fully charged to avoid
further use of battery.
• When the power bank enters protection mode (LEDs turn off and power bank will not
charge) caused by issues such as a short circuit, use an external charger to charge it and
bring it back to normal operation.
• Keep the power bank away from fire, and avoid temperatures above 113°F (45°C).
• Do not get the power bank wet or immerse it in water.
• Do not wash the power bank with corrosive cleaner.
• Do not squeeze or puncture the power bank so as to avoid electrolyte leakage of lithium-
ion battery.
• Do not attempt to disassemble, modify or fix this device on your own.
• Do not use a damaged cable or power charger to charge the power bank.
• Please recycle this device at an appointed disposal location for lithium-ion batteries.
• UPB-12K0-S2X2U
• 3 ft. USB Micro-B Cable
• Owner’s Manual
• Charge multiple phones, tablets or other mobile devices on the go, without the need for a
power outlet
• Dual USB ports provide up to 5V 2.4A of power for simultaneous charging of mobile
devices
• Built-in auto-sensing functionality for optimal compatibility with connected devices
• 12,000mAh capacity lets you charge at maximum power draw for hours
• 4 battery power LEDs show remaining battery capacity
• Automatic power-off turns off the LEDs when not in use
• Sleek, portable design is perfect for on-the-go use
• Short circuit, overvoltage, overcurrent, overcharge and overdischarge protection for safe,
reliable charging
17-05-361-9336EC.indb 2 6/7/2017 1:39:19 PM
3
System Requirements
Optional Accessories
USB Device Charging Instructions
Power Bank Charging Instructions
• Smartphone, tablet or other mobile USB device
• M100-Series USB to Lightning® Cables
• U030-Series USB 2.0 A to 5-Pin Mini-B Cables
• U038-Series USB 2.0 A to USB Type-C Cables
• UR05C-Series Micro-B Charge-Only Cables
• U326-Series USB 3.0 A to Micro-B Cables
• U420-003 USB 3.1 Gen 1 (5 Gbps) Type-C M/M Cable
Notes:
• Before charging your devices for the first time, you should first fully charge the power bank
• There is a power button located on top of the power bank. When pressed once, the LEDs will
illuminate to indicate how much battery capacity is left. When held down, this button turns off the
LEDs and stops any device charging.
• When charging a USB device, the LED indicators illuminate to indicate the level of battery capacity
LED Status Battery Capacity
100-75%
50-75%
25-50%
1-25%
0%
1. Connect your mobile devices to the USB-A ports on the power bank using the included
USB Micro-B cable or a USB cable suitable for your device.
2. The devices will begin charging, with the LEDs operating per the above notes.
Notes:
• There is a power button located on top of the power bank. When pressed once, the LEDs illuminate
to indicate how much battery capacity is left. When held down, this button turns off the LEDs and
stops any device charging.
• When charging the power bank, the LEDs will illuminate to indicate the level of battery capacity
LED Status Battery Capacity
100%
75-99%
50-75%
25-50%
1-25%
1. Using the included USB Micro-B cable, connect the Micro-B port on the power bank to
the USB-A port on a computer or USB charger.
2. The device will begin charging, with the LEDs operating per the above notes.
= lit; = unlit
= lit; = unlit; = flashing
17-05-361-9336EC.indb 3 6/7/2017 1:39:19 PM

Produktspezifikationen

Marke: Tripp Lite
Kategorie: powerbank
Modell: UPB-12K0-S2X2U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite UPB-12K0-S2X2U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung powerbank Tripp Lite

Tripp Lite

Tripp Lite UPB-10K4-S2U Bedienungsanleitung

30 Juli 2024
Tripp Lite

Tripp Lite UPB-12K0-S2X2U Bedienungsanleitung

21 Juli 2024
Tripp Lite

Tripp Lite UPB-12K0-2U Bedienungsanleitung

15 November 2022

Bedienungsanleitung powerbank

Neueste Bedienungsanleitung für -Kategorien-

Bauhn

Bauhn ATAPB-0224 Bedienungsanleitung

15 Oktober 2024
Aukey

Aukey PB-P17 Bedienungsanleitung

9 Oktober 2024
Einhell

Einhell TE-CP 18 Li USB-Solo Bedienungsanleitung

8 Oktober 2024
CyberPower

CyberPower CPBC10400 Bedienungsanleitung

8 Oktober 2024
Fresh 'n Rebel

Fresh 'n Rebel 2PB3000CC Bedienungsanleitung

8 Oktober 2024
Kogan

Kogan KAPBCMPN50A Bedienungsanleitung

1 Oktober 2024
Kogan

Kogan KAPB05L20WA Bedienungsanleitung

1 Oktober 2024
Voltcraft

Voltcraft VC-C909 Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory BCA31UF Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory BCA35UF Bedienungsanleitung

1 Oktober 2024