Tripp Lite T100-001 Bedienungsanleitung

Tripp Lite Nicht kategorisiert T100-001

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite T100-001 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Quick Start Guide

Package Includes

Opening / Closing the Tool

RJ11/RJ12/RJ45 Crimping Tool with Cable Stripper

Model: T100-001

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

• T100-001 • Quick Start Guide

To open the tool handles, simply squeeze them

together and release. To lock the handles in

place, squeeze them together slightly (one or two

clicks only) and release. You can also release

the handles by turning the knob in-between the

handles counterclockwise.

Optional Accessories

• N020-Series Cat5e Stranded Conductor Bulk

Cable – 1,000 ft.

• N022-01K-GY Cat5e Solid Conductor Bulk

Cable, Gray – 1,000 ft.

• N024-01K Cat5e Solid Conductor

Plenum-Rated Bulk Cable, Gray – 1,000 ft.

• N028-01K-GY Cat5e Solid Conductor

Outdoor-Rated Bulk Cable, Gray – 1,000 ft.

• N030-010 Cat5e RJ45 Plugs for Solid /

Stranded Conductor Cable – 10 Pack

• N030-100 Cat5e RJ45 Plugs for Solid /

Stranded Conductor Cable – 100 Pack

• N030-100-FL Cat5e RJ45 Plugs for Solid /

Stranded Conductor Flat Cable – 100 Pack

• N031-050 Cat5e RJ45 Plugs for Stranded

Conductor Cable – 100 Pack

• N222-Series Cat6 Solid Conductor

Bulk Cable – 1,000 ft.

• N224-01K-GY Cat6 Solid Conductor

Plenum-Rated Bulk Cable, Gray – 1,000 ft.

• N230-100 Cat6 RJ45 Plugs for Solid /

Stranded Conductor Cable – 100 Pack

Cutting Cable

On one side of the tool is a single blade for cutting

cable. Insert the cable to the desired length into

the slot underneath the blade. Then cut the cable

by squeezing the handles together until the cable

cleanly separates.

15-09-328-9334FE.indd 1 10/1/2015 3:46:50 PM

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects

in materials and workmanship for a period of one (1) year

from the date of initial purchase. TRIPP LITE’s obligation

under this warranty is limited to repairing or replacing (at its

sole option) any such defective products. To obtain service

under this warranty, you must obtain a Returned Material

Authorization (RMA) number from TRIPP LITE or an authorized

TRIPP LITE service center. Products must be returned to

TRIPP LITE or an authorized TRIPP LITE service center with

transportation charges prepaid and must be accompanied by

a brief description of the problem encountered and proof of

date and place of purchase. This warranty does not apply to

equipment, which has been damaged by accident, negligence

or misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES

NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of

implied warranties; therefore, the aforesaid limitation(s) or

exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE

BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF

THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not liable for any

costs, such as lost proﬁts or revenue, loss of equipment, loss

of use of equipment, loss of software, loss of data, costs of

substitutes, claims by third parties, or otherwise.

Use of this equipment in life support applications where

failure of this equipment can reasonably be expected to cause

the failure of the life support equipment or to signiﬁcantly

affect its safety or effectiveness is not recommended. Do not

use this equipment in the presence of a ﬂammable anesthetic

mixture with air, oxygen or nitrous oxide.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

15-09-328 93-34FE_RevA

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for

a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice.

Stripping Round Cable

Crimping Connectors

Stripping Flat Cable

Insert the cable into the slot located in front of the

lower scoring cable. Squeeze the tool’s handles

and rotate the tool around the cable to score the

jacket. Pull off the jacket.

Once jacket has been stripped from the cable,

insert the cable wires into an appropriate plug.

Follow by inserting the plug into the tool’s

corresponding 6-Pin or 8-Pin slot, then squeeze

the handles to crimp.

4-Pin/6-Pin – On the same side of the tool as

the double blades, insert the cable in-between

the blades until it hits the rectangular stopper.

Squeeze the tool’s handles to score each side of

the cable, then pull off the jacket.

8-Pin – On the same side of the tool as the

double blades, insert the cable in-between the

blades until the cable comes out just past the

cutting blade on the other end. Squeeze the tool’s

handles to score each side of the cable, then pull

off the jacket.

15-09-328-9334FE.indd 2 10/1/2015 3:46:50 PM

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Nicht kategorisiert
Modell:	T100-001
Produktfarbe:	Black, Blue
Verpackungsbreite:	80 mm
Verpackungstiefe:	46 mm
Verpackungshöhe:	209.8 mm
Paketgewicht:	340 g
Ursprungsland:	China
Anzahl Produkte pro Versandkarton:	10 Stück(e)
Gewicht Versandkarton:	3600 g
Länge des Versandkartons:	85.1 mm
Breite des Versandkartons:	214.9 mm
Höhe des Versandkartons:	309.9 mm
Hauptkarton GTIN (EAN/UPC):	10037332190335
Ablösungskapazität (min):	- mm
Ablösungskapazität (max):	- mm