Tripp Lite T040-001-DP Bedienungsanleitung

Tripp Lite Kabel für Computer und Peripheriegeräte T040-001-DP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite T040-001-DP (32 Seiten) in der Kategorie Kabel für Computer und Peripheriegeräte. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/32

Owner’s Manual

DisplayPort/Mini

DisplayPort Cable Tester

Model: T040-001-DP

Espanol 9 • Français 17 • Русский 25

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

04-226-933798.indb 1 4/30/2018 3:39:37 PM

Package Contents

Product Features

• Master Unit

• Remote Unit

• Carrying Case

• Owner’s Manual

• All-in-one unit combines a Main Tester with a removable Remote Identiﬁer

• Compatible with DisplayPort versions 1.0 through 1.4

• Fast and accurate veriﬁcation of DisplayPort and Mini DisplayPort cables

• Displays 19 pin-to-pin wire map and shield connection status to ensure

mapping continuity and proper conﬁguration

• Two adjustable test modes available: Continuity and Sweep

04-226-933798.indb 2 4/30/2018 3:39:37 PM

Operation

Notes:

• Before testing, insert a 9V battery (not included) and ensure the cable being tested

is not yet connected to the tester.

• Do not test live cables or any cable connected to an active device. Cables should be

directly connected to the Master Unit, and then to the Remote Unit.

Testing

Simply connect the desired cable to the unit, then switch the Sweep/OFF/

Continuity button to “Continuity” for sync testing, or “Sweep” for step-by-

step testing.

Note: During sync testing, all LEDs illuminate on the wire map at once. During step-by-

step testing, the LEDs will illuminate one at a time.

When testing uninstalled patch cable, you can leave the Main Tester and

Remote Identiﬁer connected.

When testing installed cable, you will need to remove the Remote

Identiﬁer from the Main Tester. Connect one end of the cable to the

appropriate connector on the Main Tester, and the other end of the cable to

the appropriate connector on the Remote Identiﬁer.

Note: Upon switching to the desired testing mode, the LEDs on the Main Tester and

Remote Identiﬁer will illuminate to indicate the results.

If testing DisplayPort-to-DisplayPort cables, use “A pin” side numbers

found on both the Main Tester and Remote Identiﬁer. For DisplayPort-to-Mini

DisplayPort and Mini DisplayPort-to-Mini DisplayPort cables, use “C pin” side

numbers found on both the Main Tester and Remote Identiﬁer.

04-226-933798.indb 3 4/30/2018 3:39:37 PM

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Kabel für Computer und Peripheriegeräte
Modell:	T040-001-DP
Produktfarbe:	Schwarz
Eingebautes Display:	Nein
Verpackungsbreite:	150.1 mm
Verpackungstiefe:	119.9 mm
Verpackungshöhe:	41.9 mm
Paketgewicht:	160 g
Ursprungsland:	China
Einfach zu bedienen:	Ja
Betriebsanleitung:	Ja
Anzahl Produkte pro Versandkarton:	10 Stück(e)
Gewicht Versandkarton:	1620 g
Länge des Versandkartons:	199.9 mm
Breite des Versandkartons:	480.1 mm
Höhe des Versandkartons:	130 mm
Aufbewahrungstasche:	Ja
Nachhaltigkeitszertifikate:	RoHS
Hauptkarton GTIN (EAN/UPC):	10037332206449
Kabeltyp:	DisplayPort
Testtyp:	Kurzschlussprüfung