Tripp Lite SU180KMBPKX Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite SU180KMBPKX (36 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
1
Maintenance Bypass Panel
Models: SU100KMBPKX, SU120KMBPK, SU160KMBPKX,
SU180KMBPKX, SU210KMBPKX
Installation and Operation Manual
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All trademarks are the sole property of their respective owners.
Contents
1. Introduction 2
2. Important Information About This Manual 2
2.1 Manual Symbols 2
3. Safety Precautions 2
4. Inspection Upon Receipt of Goods 3
4.1 General 3
4.2 Visible Damage 3
4.3 Concealed Damage 3
4.4 Return of Damaged Goods 3
5. System Overview 3
6. System Specifications 3
6.1 Electrical 3
6.2 Environmental 3
6.3 General Specifications 4
7. Installation 4
7.1 Preparation 4
7.1.1 Equipment Inspection 4
7.1.2 Necessary Equipment and Tools 4
7.1.3 Installation Safety Precautions 4
7.1.4 Storage 4
7.2 Installation Steps 4
7.2.1 Equipment Location 4
7.2.2 Equipment Mounting 4
7.2.3 Equipment Connections 5
7.2.4 Pre-Energizing Inspection 5
7.2.5 Energizing 5
8. System Operation 6
9. Maintenance 7
9.1 Short Circuits and Overloads 7
10. Reference Materials 7
11. Warranty 9
Español 10
Français 19
Русский 28
2
Before installing or maintaining this equipment, it is extremely important to read this manual and be sure that all equipment drawings
and schematics are reviewed and clearly understood. If there are any questions concerning this manual or any of the installation or
maintenance procedures and/or requirements, please contact a Tripp Lite representative before proceeding.
Information in this manual is not intended for use as a training manual for nonqualied personnel.
When installing this equipment, always follow all applicable federal, state and local regulations to ensure safe and proper equipment
installation.
Only qualified persons should attempt to install or service this equipment. A qualied person is one who has skills and knowledge
related to the construction and operation of electrical equipment and installations and has received safety training on the hazards
involved.
Equipment installation and maintenance should always be performed with heavily insulated tools. It is also recommended to wear
rubber gloves and boots and to use insulating mats to stand on when working on this equipment.
Always wear eye protection when installing or maintaining power equipment.
To avoid personal injury, including electrical shock, severe burns and possible death, all jewelry, including bracelets, rings and
watches, must be removed prior to installing or servicing this equipment.
For the safety of others, never leave an open cabinet or panel unattended.
Any modifications to the equipment without authorization by Tripp Lite could result in equipment damage, personal injury or death.
Never work on power equipment while it is energized. De-energize equipment and lock off all power to the equipment before working
inside.
Inspection and maintenance should only be performed on equipment that has been de-energized and electrically isolated so that no
accidental contact can be made with energized parts.
SAVE THESE INSTRUCTIONS!
This manual contains important information that is needed during the installation and maintenance of the system.
3. Safety Precautions
1. Introduction
2. Important Information About This Manual
2.1 Manual Symbols
Warning:
Indicates information provided to protect the user against personal injury, safety hazards and/or possible equipment damage.
Electrical Hazard:
Indicates that an electrical hazard exists that will result in personal injury or death if instructions are not followed.
Important:
Indicates information provided as an installation or operating instruction or tip, as well as general important installation and system
information.
Tripp Lite would like to thank you for choosing our product for your equipment needs. We know there are a lot of choices and we appreciate
the opportunity to supply each of our customers with the highest-quality power products manufactured in the United States today. All of our
solutions are factory-tested to the highest standards.
Sales support for future equipment needs or upgrades is provided by our regional sales staff and qualied representatives. All technical
questions and service issues should be directed to our main office by visiting www.tripplite.com/support.
Tripp Lite
www.tripplite.com
Technical Support
www.tripplite.com/support
3
4. Inspection Upon Receipt of Goods
5. System Overview
4.1 General
Special precautions and care have been taken to ensure the system arrives safe and undamaged. However, upon receipt, you should inspect
the entire shipment, including the crate and any boxes, for evidence of damage that may have occurred during transit.
4.2 Visible Damage
It is the responsibility of the person receiving the shipment to inventory and fully inspect all materials against the bill of lading or waybill
IMMEDIATELY while the carrier representative is still present. Ensure that all items are accounted for, including number of skids and quantity
of boxes. Also note any visible external damage that may have occurred during transit. Make all applicable notations on the delivery receipt
before signing and file a damage report with the carrier.
4.3 Concealed Damage
Within 3 to 30 days of receipt (depending on courier), unpack the system and check for any concealed damage. Check the materials
received against the detailed packing list to verify the quantity and the condition as complete and satisfactory.
Note any damage to the internal packaging. Then request an inspection by the carrier andle a concealed damage claim. If there is a
material shortage, visit www.tripplite.com/support to file a claim.
Please contact your shipping company for all shipping damage. Tripp Lite is not responsible for any shipping damage.
4.4 Return of Damaged Goods
Should equipment be damaged and require return to Tripp Lite for repair, a representative will provide instructions along with an RMA number
to expedite the return.
An RMA number must be obtained before returning equipment to Tripp Lite.
The Tripp Lite Maintenance Bypass Panel (MBP) is used in conjunction with an Uninterruptible Power Supply (UPS) to maintain total
continuity of power to connected load circuits when bypass of the UPS equipment is required for performance of regular service and
maintenance.
These MBPs are available with current capacities ranging from 225-400 amperes with multiple input voltage options available. These MBP
models contain three 3-pole switches.
Always refer to the Ratings Label on the equipment for configuration-specific ratings. Equipment specifications and ratings in this
document represent typical equipment and may vary from the equipment provided.
6.1 Electrical
Voltage: 208Y/120VAC, 3-Phase, 4-Wire, plus ground
Frequency: 60 Hz
Current: 225A minimum; 400A maximum
Short Circuit Rating: 10kAIC
Neutral Bus Current Rating: 400A
6.2 Environmental
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Relative Humidity: 5% to 95% non-condensing
Altitude: 0 to 7400 ft. (0 to 2255 m) above sea level
6. System Specifications


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: SU180KMBPKX

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite SU180KMBPKX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-