Tripp Lite SmartRack SRWF6U36 Bedienungsanleitung

Tripp Lite Nicht kategorisiert SmartRack SRWF6U36

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Tripp Lite SmartRack SRWF6U36 (16 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 51 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
Table of Contents
1. Important Safety Instructions 2
2. Overview 2
3. Feature Identification 3
4. Enclosure Installation 4
4.1 Preparation 4
4.2 Unpacking 4
5. Enclosure Configuration 5
5.1 Door Locks 5
5.2 Cable Access & Management 5
5.3 Reversing the Front Door 5
5.4 Mounting Rails 6
5.5 Adjusting Mounting Rail Depth 6
6. Wall Mounting the Enclosure 6
6.1 Mounting 6
7. Equipment Installation 7
8. Optional Patch Panel Installation 7
9. Specifications 7
10. Storage & Service 8
11. Warranty & Product Registration 8
Español 9
Low-Profile Wall-Mount
SmartRack® Enclosures
Models: SRWF2U, SRWF2U36, SRWF4U, SRWF4U36, SRWF5U,
SRWF5U36, SRWF6U, SRWF6U36
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All trademarks are the sole property of their respective owners.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
2
1. Important Safety Instructions
2. Overview
SAVE THESE INSTRUCTIONS
This Manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual. Failure to
comply may invalidate the warranty and cause property damage or personal injury.
• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants, dust and direct sunlight.
• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation
openings of the enclosure.
• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a
mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container.
• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.
• Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.
• Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible.
• Install the enclosure in a structurally sound area capable of handling the load, or on a level floor that is able to bear the weight of the enclosure, all
equipment that will be installed in the enclosure and any other enclosures and/or equipment that will be installed nearby.
• Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.
• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage
that will void the warranty.
• Do not reship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet (“SP1” models only). The
combined weight of the enclosure and installed equipment must not exceed the load capacity of the pallet. Tripp Lite is not responsible for any
damage that occurs during reshipment.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable
anesthetic mixture with air, oxygen or nitrous oxide.
These Low-Profile Wall-Mount SmartRack Enclosures provide convenient and secure vertical mounting for standard 19-inch rackmount equipment,
regardless of vendor, and ship fully assembled for quick and easy deployment.
3
3. Feature Identification
Features for all other models are similar, except the SRWF2U series does not have a top panel door.
1 Front Door
2 Top Panel Door
3 Horizontal Mounting Rails
4 Vertical Mounting Bracket
5 Patch Panel Mounting Bracket
6 Cable Access Holes
7 Vents
8 Wall-Mounting Slots
SRWF2U
SRWF5U
2
7
3
5
5
6
6
6
7
7
4
1
8
8

Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: SmartRack SRWF6U36
Breite: 650.2 mm
Tiefe: 292.1 mm
Gewicht: 39460 g
Produktfarbe: Schwarz
Höhe: 1092.2 mm
Höchstgewichtskapazität: 68 kg
Verpackungsbreite: 812.8 mm
Verpackungstiefe: 1244.6 mm
Verpackungshöhe: 457.2 mm
Paketgewicht: 39460 g
Zertifizierung: EIA-310-E
Warentarifnummer (HS): 8517.79.0000
Ursprungsland: China
Menge pro Packung: 1 StĂĽck(e)
Gehäusematerial: Stahl
Montageset: Ja
Anzahl Produkte pro Versandkarton: 1 StĂĽck(e)
Gewicht Versandkarton: 39460 g
Länge des Versandkartons: 1244.6 mm
Breite des Versandkartons: 812.8 mm
Höhe des Versandkartons: 457.2 mm
Größe (Imperial): 19 "
Nachhaltigkeitszertifikate: RoHS
Produkte pro Palette: 1 StĂĽck(e)
Schrauben enthalten: Ja
Rack-Kapazität: 6U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite SmartRack SRWF6U36 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-