Tripp Lite SmartRack SR12UBEXPNDKD Bedienungsanleitung

Tripp Lite Nicht kategorisiert SmartRack SR12UBEXPNDKD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite SmartRack SR12UBEXPNDKD (28 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/28
1
Owner’s Manual
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $50 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
SR12UBEXPNDKD
12U, 4-Post Open Frame Rackmount Kit with
Casters and Adjustable Rail
Important Safety Instructions 2
Parts List 2
Rack Assembly 3
Equipment Installation 6
Storage and Service 7
Warranty and Product Registration 7
Español 8
Français 15
Póññêèé 22
2
Important Safety Instructions
Parts List
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation of the product described
in this manual. Failure to comply may invalidate the warranty and cause property damage or personal injury.
Keep the rack in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants and dust.
Leave adequate space at the front of the rack for proper ventilation.
Inspect the rack for shipping damage. Do not use the rack if it is damaged.
Install the rack in a structurally sound area capable of handling the load, the weight of the rack, all equipment that will be installed in the rack
and any other equipment that will be installed nearby.
Do not attempt to install the rack unassisted.
Do not attempt to install equipment without first stabilizing the rack.
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a
ammable anesthetic mixture with air, oxygen or nitrous oxide.
Vertical Mounting Rail Side Bracket Base Bracket with Casters Top Bracket
x4x4
x2
x2
x16
x2
x12
Adjustable Side
Support/Mounting Rail
M6 x 12 mm
Phillips Screw
M8 x 12 mm
Acorn/Cap Nut
Rack Components and Assembly Hardware
3
Rack Assembly
Parts List
M6 Cage Nut PVC Cup Washer M6 Phillips Screw
Cable Management Hook Hook Mounting Screws
x20
x10
x20
x10
x20
1 Lay out a side bracket A. Insert the side bracket’s front threaded
M8 studs through the corresponding holes on the base bracket
and the corresponding holes on the vertical mounting rail B.
Fasten with two M8 acorn/cap nuts C and an M6 Screw D.
2 Repeat step 1 for the left side bracket.
1
2
A
B
CD
Equipment Mounting Hardware
Cable Management Hardware (Optional Installation)


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: SmartRack SR12UBEXPNDKD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite SmartRack SR12UBEXPNDKD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-