Tripp Lite SmartPro SMART1500RM2UL Bedienungsanleitung

Tripp Lite UPS SmartPro SMART1500RM2UL

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite SmartPro SMART1500RM2UL (60 Seiten) in der Kategorie UPS. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/60
1
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved. SmartPro
® is a registered trademark of Tripp Lite.
Español 21
Français 41
SmartPro® 2U Rackmount
Intelligent, Line-Interactive UPS System
(with Lithium Iron Phosphate Battery)
120V Sine Wave Output • 1500VA - 2200VA Capacity
Models: SMART1500RM2UL, SMART2200RM2UL
(Series Numbers: AG-8897, AG-0163)
Not suitable for mobile applications.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
18-01-271-933440.indb 1 1/25/2018 3:23:13 PM
2
EMI Filter
Surge Protec on
Inverter
Reinforced
Insulaon
Charger
Control
Transformer
Line Cuto Relay Boost2 Relayff
Boost1 Relay
Cut Relay
ACin
ACout
N
L
L
N
USB Com port*
Serial Com port*
+
Interna l
Ba ery
EPO por t*
Display & Switches
Master Load Relay
Switched Load Relay(s)
ACout Switched*
SNMP port*
*if equipped
PE
PE
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation,
operation and storage of this product. Failure to heed these warnings may affect the warranty.
UPS Location Warnings
• Use caution when lifting the UPS. Because of the considerable weight of all rackmount UPS
systems, at least two people should assist in lifting and installing them.
• Install the UPS indoors, in an area free from excess moisture, heat, dust, conductive
contaminants, and direct sunlight.
• The UPS operating temperature is 32° to 104°F (0° to 40°C). For optimum battery performance,
the ambient temperature should be maintained between 68° and 77°F (20° and 25°C).
• Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its vents
or fan openings.
• When mounting the UPS system in tower orientation, make sure the LCD Screen panel is at the
top of the UPS, not at the bottom.
• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner
will seriously inhibit the unit’s internal cooling, eventually causing product damage not covered
under warranty.
• The UPS must be returned to Tripp Lite for battery replacement. Visit www.tripplite.com/support
and click the product returns link to request a Returned Material Authorization (RMA) number
(an RMA number is required for servce). Once the product request information is completed, an
assigned RMA number and shipping instructions will be sent to your email account. See Storage
and Service for more information.
UPS Connection Warnings
• The UPS contains its own energy source (battery). The output terminals may be live even when
the UPS is not connected to an AC supply.
• Connect the UPS to a properly grounded AC power outlet. Do not modify the UPS system’s plug
in a way that would eliminate its connection to ground. Do not use adapters that eliminate the
UPS system’s connection to ground.
• This UPS is designed to be used on a power distribution system in accordance with the plug
configuration. The basic circuit operation is as follows:
18-01-271-933440.indb 2 1/25/2018 3:23:14 PM
3
UPS Connection Warnings continued
• Do not plug the UPS into itself; this will damage the UPS and void the warranty.
• If connecting the UPS to a motor-powered AC generator, the generator must provide filtered,
frequency-regulated computer-grade output. Connecting the UPS to a generator will void its
Ultimate Lifetime Insurance.
Equipment Connection Warnings
• Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended.
• Do not connect surge protectors or extension cords to the output of the UPS. This might damage
the UPS and may affect the surge protector and UPS warranties.
Battery Warnings
• Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe
proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries.
Do not short or bridge the battery terminals with any object. There are no user-serviceable parts
inside the UPS. At the end of the UPS unit’s life, follow best practice by discharging the battery
prior to disposal. Refer to local codes for disposal requirements. Do not connect or disconnect
battery packs when the UPS is operating on battery power.
• Do not operate the UPS without batteries.
Fan Replacement Warning
• The cooling fan installed in the UPS can be replaced by qualified service personnel. Always
unplug and turn off the UPS before performing fan replacement. Use tools with insulated
handles. Refer to the Fan Replacement section for step-by-step instructions.
Important Safety Instructions
18-01-271-933440.indb 3 1/25/2018 3:23:14 PM


Produktspezifikationen

Marke: Tripp Lite
Kategorie: UPS
Modell: SmartPro SMART1500RM2UL

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite SmartPro SMART1500RM2UL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung UPS Tripp Lite

Bedienungsanleitung UPS

Neueste Bedienungsanleitung für -Kategorien-