Tripp Lite RELAYCARDSV Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite RELAYCARDSV (28 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/28
1
Owner’s Manual
Relay I/O Card
Model: RELAYCARDSV
1 Introduction 2
1.1 Product Features 2
1.2 Package Contents 2
2 Installation and Setup 2
2.1 System Requirements 2
2.2 Installation 2
3 Specifications 3
3.1 Internal Circuit 3
3.2 Electric Specifications 3
3.3 Pin Assignment 3
3.4 Function Description 4
3.5 Application Example 4
4 Internal Logic Connection 5
4.1 Pin Definition and 5
Internal Logic Connection
4.2 Connection for Normally Closed 5
4.3 Connection for Normally Open 5
5. Jumper Configuration 6
5.1 Jumper Setup 6
5.2 Jumper Function Description 6
6. Warranty and Product Registration 7
Español 8
Français 15
Русский 22
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
2
1.1 Product Features
The RELAYCARDSV communication card provides contact closures for remote
UPS monitoring. To meet different application requirements, the RELAYCARDSV
allows the user to select status of the dry-contact signal (normally closed or
open) by setting the jumper. Typical applications include:
IBM Server, PC and workstation equipment
Auto-controlled industrial equipment
and communication applications
1.2 Package Contents
RELAYCARDSV
Owner’s Manual
9-Pin Communication Cable
2.1 System Requirements
The RELAYCARDSV supports Tripp Lite SmartOnline® SVTX 400V Non-Modular, SVX 400V Modular, and SV 208V Modular UPS systems.
2.2 Installation
1. Introduction
2. Installation and Setup
Step 2: Insert RELAYCARDSV into the ACC Slot.
Step 3: Using a screwdriver and screws provided from removing
the ACC Slot cover in Step 1, secure the RELAYCARDSV to the UPS
chassis.
Step 1: Using a screwdriver, remove the ACC Slot cover located on
the rear panel (SVTX Series) or front panel for Modular systems (SVX-
and SV-Series).
Step 4: Use the 9-pin communication cable to connect UPS and
equipment for remote monitoring and control.
3
3.1 Internal Circuit
DB9 Internal Circuit Diagram
3. Specifications
3.2 Electric Specifications
DB9 Port Electric Specifications
Parameter Symbol Max. Min. Unit
Resistor* DC Current IR 6 1 mA
Diode Reverse Voltage VR 6 - V
Forward Current IF 50 - mA
Peak Forward Current IF (Peak) 1 - A
Relay DC Voltage VDC 24 - V
DC Current IDC 1.0 - A
Note: DC current should be lower than 6mA. When the DC current exceeds 6mA, a resistor within DC current limitation should be added within the Remote
Shutdown/Common loop (e.g. a 2K resistor with at least 0.1W rating power). For more information, refer to diagrams A and B in .3.5 Application Example
3.3 Pin Assignment
Pin Assignment Function I/O
Pin 1 UPS Failure O/P
Pin 2 UPS Audible Alarm O/P
Pin 3 GND (Common for Pin 4) Power Ground
Pin 4 Remote Shutdown I/P
Pin 5 Common for Relays Power Supply
Pin 6 Bypass Active O/P
Pin 7 Low Battery O/P
Pin 8 UPS On O/P
Pin 9 Utility Failure O/P
Note: The shutdown pin (pin 3 and pin 4) only accepts 3-10s high level signal to perform the UPS shutdown.


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: RELAYCARDSV
Breite: 67.1 mm
Tiefe: 129 mm
Gewicht: 80 g
Produktfarbe: Green, Silver
Höhe: 33 mm
Verpackungsbreite: 166.1 mm
Verpackungstiefe: 124.2 mm
Verpackungshöhe: 48 mm
Paketgewicht: 200 g
Ursprungsland: China
Anzahl Kanäle: - Kanäle
Anzahl Produkte pro Versandkarton: 20 Stück(e)
Gewicht Versandkarton: 4500 g
Länge des Versandkartons: 297.9 mm
Breite des Versandkartons: 341.9 mm
Höhe des Versandkartons: 240 mm
Abmessungen (BxTxH): 33 x 67 x 129 mm
Kompatible Produkte: Tripp Lite SVTX 400V, SVX 400V,
Hauptkarton GTIN (EAN/UPC): 10037332199772
Signalentdeckung: Eingang
Kanaltyp: Relaiskanal

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite RELAYCARDSV benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-