Tripp Lite RBC58-3US Bedienungsanleitung

Tripp Lite Nicht kategorisiert RBC58-3US

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite RBC58-3US (32 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/32

Owner’s Manual

Replacement Battery

Cartridge (R.B.C.) for Select

SmartOnline® UPS Systems

& External Battery Packs

Model: RBC58-3US

Not suitable for mobile applications.

Introduction 2

Important Safety Instructions 2

Battery Removal 3

UPS System – Internal Battery Removal 3

External Battery Pack – Internal Battery Removal 4

R.B.C. Installation 5

UPS System – R.B.C. Internal Battery Installation 5

External Battery Pack – R.B.C. Internal Battery Installation 6

Maintenance 7

Warranty and Product Registration 8

Español 9

Français 17

Русский 25

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

Introduction

Important Safety Instructions

Tripp Lite’s RBC58-3US Replacement Battery Cartridge (R.B.C.) is designed for use with the following UPS systems and

external battery packs:

UPS Models with Built-In Receptacles: SU5KRT3UHV, SU5KRT3UX, SU5KRT3UG, SU5KRT3UHW, SU5KRT3UTF,

SU6KRT3UHV, SU6KRT3UTF, SU6KRT3UX, SU6KRT3UG, SU6KRT3UHW

UPS Models with a Detachable Bypass Power Distribution Module: SU5KRT3UHVMB, SU5KRT3UTFMB,

SU5KRT3UGMB, SU5KRT3UHWMB, SU6KRT3UHVMB, SU6KRT3UHVMB, SU6KRT3UTFMB, SU6KRT3UGMB,

SU6KRT3UHWMB, SU6KRT3UXMB

External Battery Packs: BP192V12RT3US

IMPORTANT SAFETY INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

CAUTION: Only qualified professional electrical service personnel should perform installation.

• Use caution when lifting R.B.C.s.

• Make certain the R.B.C.s for the UPS and/or External Battery Pack use the same DC voltage before connecting them.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected

to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not

recommended.

• Use only Tripp Lite R.B.C.s.

• When installing multiple R.B.C.s in a UPS and/or External Battery Pack, all R.B.C.s should be approximately the same age.

• It is normal for sparks to occur when connecting R.B.C.s.

• Due to the possibility of dangerous arcing, do not disconnect internal batteries or unplug external batteries from the UPS

while the UPS is operating on battery power.

• Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not

dispose of the batteries in a fire. Do not open the R.B.C.s or batteries. Do not short or bridge the battery terminals with

any object. Use tools with insulated handles. Battery replacement should be performed only by authorized service personnel

using the same number and type of batteries (Sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for

disposal requirements or visit tripplite.com/support/recycling-program for recycling information.

Battery Removal

UPS System – Internal Battery Removal

1 Remove the six front screws from the front bezel, then

remove the bezel from the UPS. Hang the bezel on the

available hook.

Note: The front panel display has an attached ribbon cable

that extends from the UPS to the front bezel. Make sure to

keep this cable out of the way when opening and closing the

battery door, or use a screwdriver to detach the display from

the bezel.

2 Loosen the two captive screws securing the battery door.

3 Open the battery door. Ensure the Smart battery

communications cable is safely out of the way when

opening the battery door and removing the battery

trays.

4 Using the handles attached to each tray, slightly pull out

the old battery pack trays and disconnect the

communication cable.

5 Once the communication cables have been

disconnected. Remove both old battery trays from the

UPS. Proceed to section if no R.B.C Installation

external battery packs are being used.

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Nicht kategorisiert
Modell:	RBC58-3US
Breite:	119.4 mm
Tiefe:	572.5 mm
Gewicht:	32380 g
Produktfarbe:	Grau
Höhe:	95 mm
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Verpackungsbreite:	296.9 mm
Verpackungstiefe:	676.9 mm
Verpackungshöhe:	225 mm
Paketgewicht:	33510 g
Ursprungsland:	Taiwan
Akku-/Batteriespannung:	12 V
Anzahl Produkte pro Versandkarton:	1 Stück(e)
Batteriekapazität:	5 Ah
Nachhaltigkeitszertifikate:	RoHS
Anzahl enthaltener Akkus/Batterien:	16 Stück(e)