Tripp Lite PS3612RA Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite PS3612RA (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
1
Power Strips
Models: PS120406, PS120420, PS240406, PS2408RA,
PS240810, PS3612RA, PS361206, PS361220 and
PS480806
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright Š 2015 Tripp Lite. All rights reserved.
Este manual esta disponible en espaĂąol en la pĂĄgina de Tripp Lite: www.tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com
Owner’s Manual
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $50 value!
www.tripplite.com/warranty
PS-Series Power Strips are designed to provide convenient access to multiple AC outlets.
Note: The Power Strip models listed above DO NOT provide your connected equipment with surge or line-noise
protection.
Important Safety Instructions 2
Equipment Connection 2
Wall Mounting 2
Specications 3
Warranty and 4
Product Registration
15-02-179-933407-EN.indd 1 2/18/2015 10:34:43 AM
2
Equipment Connection
Plug your equipment into the Power Strip’s AC receptacles. DO NOT plug in equipment that draws
more total amps than your Power Strip’s amperage rating (see label on Power Strip for amperage
rating), or you will trip the circuit breaker. If the circuit breaker trips, remove overload and depress
breaker to reset. Leave enough clearance at the end of the Power Strip to allow the circuit
breaker to operate normally.
Note: Select models with a power switch feature a protective switch cover. To access the switch, flip open the
attached cover.
Wall Mounting
All Power Strip models feature clips for horizontal or vertical mounting on a variety of surfaces.
The user must supply other mounting hardware (screws, etc.) and determine its suitability for use
with the chosen mounting surface.
1 Mark a straight horizontal or vertical line where
you want to mount the Power Strip. At each end
of the line, mark where the edges of the Power
Strip will be located. Place a mounting clip on
the mounting surface 1” in from these edges
and mark where the screws must be driven into
the wall. For strips longer than 48” (120 cm),
also mark a screw hole for a third mounting clip
midway between the other two.
2 Keyhole Mounting: Drive #8 screws directly
into the mounting surface. Snap the mounting
clips onto the Power Strip 2a , then hang the
Power Strip on the screws by the keyhole slots
on its mounting clips 2b .
1
2a
2b
Important Safety Instructions
SAVE THESE INSTRUCTIONS
• DO NOT connect the power strip to an ungrounded outlet.
• DO NOT use the power strip with 2-wire extension cords or adapters.
• This power strip is designed for indoor use only. Install the power strip away from heat-emitting
appliances such as radiators or heat registers.
• Do not install where excessive moisture is present.
• Do not plug extension cords into the power strip.
• Never install electrical, telephone, network or coaxial wiring during a lightning storm.
• Do not drill into any part of the housing or open the housing for any reason. There are no
user-serviceable parts inside.
15-02-179-933407-EN.indd 2 2/18/2015 10:34:43 AM
3
Specications
Model
Amperage
Rating
Outlet
Qty. x Type
Input
Plug
Cord
Length
Overall
Length Breaker
PS120406 15A 4 x 5-15R 5-15P 6 ft. 12 in. 15A
PS120420 20A 2 x 5-20R, 2 x 5-15R 5-20P 15 ft. 12 in. 20A
PS240406 15A 4 x 5-15R 5-15P 6 ft. 24 in. 15A
PS2408RA 15A 8 x 5-15R* 5-15P* 15 ft. 24 in. 15A
PS240810 15A 8 x 5-15R 5-15P 10 ft. 24 in. 15A
PS3612RA 15A 12 x 5-15R* 5-15P* 15 ft. 36 in. 15A
PS361206 15A 12 x 5-15R 5-15P 6 ft. 36 in. 15A
PS361220 20A 2 x 5-20R, 10 x 5-15R 5-20P 15 ft. 36 in. 20A
PS480806 15A 8 x 5-15R 5-15P 6 ft. 48 in. 15A
*Right-angle
Wall Mounting (Continued)
3a 3b
3 Clip Mounting: Drive #10 screws through
washers, through the centers of the mounting
clips and into the mounting surface
3a. Place
the Power Strip inside one edge of the mounting
clips, then snap the Power Strip into place
3b.
15-02-179-933407-EN.indd 3 2/18/2015 10:34:43 AM


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: PS3612RA
Breite: 38.1 mm
Tiefe: 914.4 mm
Gewicht: 1470 g
Produktfarbe: Black, Metallic
HĂśhe: 31.8 mm
AC Eingangsspannung: 120 V
AC Eingangsfrequenz: 50 - 60 Hz
Verpackungsbreite: 116.8 mm
Verpackungstiefe: 1016 mm
VerpackungshĂśhe: 61 mm
Paketgewicht: 1810 g
Zertifizierung: cUL, UL1363
Ursprungsland: China
Kabellänge: 4.5 m
Gehäusematerial: Aluminium
Ein-/Ausschalter: Ja
Anzahl Produkte pro Versandkarton: 12 StĂźck(e)
Gewicht Versandkarton: 22140 g
Länge des Versandkartons: 1031.2 mm
Breite des Versandkartons: 266.7 mm
HĂśhe des Versandkartons: 360.7 mm
Kabelfarbe: Schwarz
Anzahl enthaltener Produkte: 1 StĂźck(e)
Maximale Eingangsleistung: 1800 W
Hauptkarton GTIN (EAN/UPC): 10037332187465
Anzahl der AC-Ausgänge: 12 AC-Ausgänge
AC-Steckertypen: NEMA 5–15R
Stromstärke (maximal): 15 A
UnterstĂźtzte Positionierung: Drinnen

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite PS3612RA benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-