Tripp Lite Protect It! SK10USB Bedienungsanleitung

Tripp Lite Nicht kategorisiert Protect It! SK10USB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite Protect It! SK10USB (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

1111 W. 35th Street Chicago, IL 60609 USA • www.tripplite.com/support

® is a registered trademark of Tripp Lite.

Owner’s Manual

Protect It!® Wall-Mount

Surge Protectors with

Dedicated USB Charging Ports

Models: SK10USB, SK30USB, SK120USB

Installation 2

Lifetime Limited Warranty 3

Ultimate Lifetime Insurance Policy 4

Warranty Registration 3

Important Safety Instructions 2

14-03-209-933349.indd 1 4/18/2014 1:55:21 PM

Installation

Connect Your Surge Protector to the AC Power Line: Plug the surge protector directly into a

3-wire grounded, 120V AC outlet.

Secure Surge Protector to Outlet Using Included Mounting Screw (SK30USB only):

Securing the surge protector to the outlet will prevent accidental disconnection. Remove the

wall outlet cover plate and plug in surge protector. Screw in the included mounting screw to

attach the surge protector to the outlet.

Check Your Surge Protector’s Diagnostic Indicator Lights: If your surge protector features

diagnostic LEDs or indicators, check them prior to connecting your equipment. They will indicate

various operating conditions when the surge protector is plugged into a live 120V AC outlet and

the surge protector’s power switch is on.

“PROTECTED” LED: Indicates the surge suppression components are intact and providing

complete protection against surges. If this LED does not illuminate, some of the surge

suppression components are not functioning, and the unit should be replaced.

Visit www.tripplite.com/support.

Connect Your Equipment to the Surge Protector’s AC Outlets: Plug your equipment’s power

cords (including 2-wire devices) into the surge protector’s AC outlets. Select models feature

integrated safety covers which cover the outlets when not in use. Other models feature special

widely-spaced outlets to accommodate transformers without covering other outlets. DO NOT

plug in extension cords. DO NOT OVERLOAD the surge protector’s outlets. The surge protector

can accommodate a total equipment load of up to 15 amps (whether plugged into a single

outlet or spread out over multiple outlets).

USB Charging Ports: Two USB charging ports are capable of delivering up to 2.1 A total (2.4 A

total for the SK10USB). This will provide enough power to charge the most demanding devices,

including smartphones, tablets and MP3 players.

SAVE THESE INSTRUCTIONS

CAUTION! DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension

cords or adapters. This surge protector is designed for indoor use only. Install the surge

protector away from heat-emitting appliances such as radiators or heat registers. Do not

install where excessive moisture is present. Do not plug extension cords into it. Never install

electrical, telephone, network or coaxial wiring during a lightning storm. Do not drill into any

part of the housing or open the housing for any reason. There are no user-serviceable parts

inside.

Important Safety Instructions

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to significantly

affect its safety or effectiveness is not recommended. Do not use this equipment in the

presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

14-03-209-933349.indd 2 4/18/2014 1:55:21 PM

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material

and workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will

repair or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or

shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th St., Chicago, IL 60609. Seller

will pay return shipping charges.

The warranties of all TRIPP LITE surge protectors are null and void if they have been connected to the output of any UPS

system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge protector has been connected to its output

receptacles.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR

NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO

THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY

OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY

EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied

warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above

limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which

vary from jurisdiction to jurisdiction.)

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for

the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or

warranty as to the suitability or fitness of these devices for any specific application.

The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique

series number. The series number can be found on the product nameplate label, along with all required approval markings and

information. When requesting compliance information for this product, always refer to the series number. The series number

should not be confused with the marketing name or model number of the product.

Lifetime Limited Warranty

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into

a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

14-03-209-933349.indd 3 4/18/2014 1:55:21 PM

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Nicht kategorisiert
Modell:	Protect It! SK10USB
Breite:	68.1 mm
Tiefe:	32.5 mm
Produktfarbe:	Schwarz
Höhe:	79.5 mm
Stecker:	NEMA 5–15P
Fernbedienung enthalten:	Nein
Zertifizierung:	UL1449
LED-Anzeigen:	Ja
Anzahl der USB-Anschlüsse:	2
Anzahl enthaltener Produkte:	1 Stück(e)
Nachhaltigkeitszertifikate:	RoHS
Drahtlos:	Ja
Anzahl der AC-Ausgänge:	1 AC-Ausgänge
AC-Steckertypen:	NEMA 5–15P
EMI/RFI Lautstärkefilter:	Ja
Nominale Eingang Spannung:	120 V
Klemm-Spannung:	500 V
Nominale Stromabgabe:	15 A
Anstieg der Energiemenge:	1080 J