Tripp Lite NPOE-EXT-1G30WP Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite NPOE-EXT-1G30WP (44 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/44
Owner’s Manual
1-Port Gigabit PoE+
Water-Resistant Extender
Model: NPOE-EXT-1G30WP
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
All trademarks are the property of their respective owners.
WARRANTY REGISTRATION
Register your product today and be automatically entered to win an
ISOBAR surge protector in our monthly drawing!
www.tripplite.com/warranty
Español 12 • Français 23 • Русский 34
2
Package Includes
Product Features
NPOE-EXT-1G30WP Gigabit PoE+ Extender
(x2) Water-Resistant Covers
Owner’s Manual
Save time and money by extending data and power over existing network
cables past the 100 m (328 ft.) limit
Extend a 10/100/1000 Mbps application over longer distances by
cascading multiple extenders up to 500 m (1640 ft.)
Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE/PoE+
devices (wireless LAN access points and bridges, VoIP, IP surveillance
cameras)
Automatically detects and protects PoE/PoE+ equipment from being
damaged by incorrect installation (non-PoE devices only receive data)
Compact aluminum case is IP65 rated for protection against water
splashes
Plug and play—no additional power required
Compact, wall-mountable design
3
RJ45 Cable Wire and Crimp Steps
1. Strip an inch or so of the outer skin of a Cat5e/6 cable with a utility
knife. Separate and straighten the internal wires, and arrange them in
the proper order. Use a wire cutter to trim the wires evenly. Slide one of
the included water-resistant covers along the end of the cable.
2. Insert the neatly trimmed wires into an RJ45 modular connector plug
(such as Tripp Lite’s N230-100) in the correct order. Use your crimping
tool (such as Tripp Lite’s T100-001-TST) to press the cable jacket and
the wires into the RJ45 connector. Be sure to test the connection to
ensure the cable is working properly.

Produktspezifikationen

Marke: Tripp Lite
Kategorie: niet gecategoriseerd
Modell: NPOE-EXT-1G30WP

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite NPOE-EXT-1G30WP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd Tripp Lite

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-