Tripp Lite N286-10GSR-MDLC Bedienungsanleitung

Tripp Lite Nicht kategorisiert N286-10GSR-MDLC

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite N286-10GSR-MDLC (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

Quick Start Guide

Product Features

Package Includes

Optional Accessories

Installation

Cisco Compatible 10GBASE-SR SFP+ Transceiver

with DDM, MMF, 850 nm, 300 m, LC

Model: N286-10GSR-MDLC

Español 3 • Français 5 • Русский 7

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

• 10GBASE-SR transceiver supports data transfer rates up to

11.1Gbps

• Compliant with SFP Multi-Source Agreement (MSA) standards

• Electrical interface compliant with SFF-8431

• Supports Digital Diagnostic Monitoring (DDM)

• 300 m transmission distance using 10Gb 50/125 MMF cabling

• Cisco switch compatible

• Hot-pluggable

• N286-10GSR-MDLC • Quick Start Guide

• N820-Series 10Gb Duplex Multimode 50/125 LC Fiber Cables • P999-000 Anti-Static Wrist Strap

Notes:

• SFP transceiver modules are static sensitive devices that require proper handling. An Anti-Static ESD Wrist Strap or similar device should always be used when

handling a transceiver module.

• The transceiver module should never be installed with cables already connected. Always remove cables prior to installation to avoid damaging the cable, cable

connectors, and/or optical interface.

• Installing and uninstalling the transceiver module numerous times will shorten its useful lifespan. Do not uninstall and reinstall the module more than is

absolutely necessary.

1. Remove the transceiver module from its packaging, leaving the dust plugs inserted in the LC optical bores.

2. Gently insert the transceiver module into the module socket of your device, pressing on the dust plugs until it locks into place.

3. Verify that the transceiver module is locked into place by trying to remove it from the module socket without releasing the latch. If it stays in

place, it is seated properly. If not, you will need to re-insert it, ﬁrmly pressing on the dust plugs until it locks into place.

4. Once you have veriﬁed that the transceiver module is securely locked in place, you can remove the dust plugs from the LC optical bores and

connect your cabling.

Note: Save the dust plugs so that they can be used in the event that the transceiver module needs to be uninstalled and reinstalled.

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Speciﬁcations

Warranty and Product Registration

Industry Standards IEEE 802.3ae 10GBASE-SR

Connector Type LC Duplex

Maximum Data Transfer Rate 11.1Gbps

Maximum Transmission Distance 300 m using 10Gb 50/125 MMF cabling

Wavelength 850 nm

Fiber Operating Mode Half/Full Duplex

DDM Support Yes

H x W x D (inches) 0.33 x 0.52 x 2.24

H x W x D (mm) 8.5 x 13.3 x 57

Weight (lbs.) 0.05

Weight (g) 23

Operating Temperature 32°F to 158°F (0°C to 70°C)

Storage Temperature -40°F to 185°F (-40°C to 85°C)

Humidity 5 to 95% RH, Non-Condensing

3-Year Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 3 years from the date

of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion. Service under this

Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609 USA. Seller

will pay return shipping charges. Visit www.tripplite.com/support before sending any equipment back for repair.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES

OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES

OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND

CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you speciﬁc legal rights, and you may have other rights which vary from

jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to

great variation, the manufacturer makes no representation or warranty as to the suitability or ﬁtness of these devices for any speciﬁc application.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Notice, Class A

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded cables and connectors with this

equipment. Any changes or modiﬁcations to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite

they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Tripp Lite has a policy of continuous improvement. Product speciﬁcations are subject to change without notice.

Guía de Inicio Rápido

Características del Producto

Contenido del Empaque

Accesorios Opcionales

Instalación

Transceptor 10GBASE-SR SFP+ Compatible

con Cisco con DDM, MMF, 850 nm, 300 m, LC

Modelo: N286-10GSR-MDLC

English 1 • Français 5 • Русский 7

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

• El transceptor 10GBASE-SR soporta velocidades de transferencia de

datos hasta 11.1Gbps

•

Cumple con los estándares del Agente de Múltiples Fuentes [MSA] SFP

• La Interfaz eléctrica cumple con SFF-8431

• Soporta Monitoreo de Diagnóstico Digital [DDM]

• Distancia de transmisión de 300 m usando cableado 50 μm /

125 μm MMF de 10 Gb

• Compatible con switch Cisco

• Conexión directa

• N286-10GSR-MDLC • Guía de Inicio Rápido

• Cables de Fibra 50 μm / 125 μm LC Multimodo Duplex 10 Gb de la

Serie N820

• P999-000 – Banda Antiestática para Muñeca

Notas:

• Los módulos transceptores SFP son dispositivos sensibles a la estática que requieren de un manejo adecuado. Debe usarse siempre una Banda Antiestática

para Muñeca [ESD] o dispositivo similar al manejar un módulo transceptor.

• El módulo transceptor nunca debe instalarse con los cables p3-ya conectados. Retire siempre los cables antes de la instalación para evitar dañar el cable, los

conectores del cable y/o la interfaz óptica.

• Instalar y desinstalar el módulo transceptor muchas veces acortará su vida útil. No desinstale y reinstale el módulo a menos que sea absolutamente

necesario.

1. Retire el módulo transceptor de su embalaje, dejando los tapones guardapolvo insertados en los oriﬁcios ópticos LC.

2. Suavemente inserte el módulo transceptor en el zócalo del módulo de su dispositivo, presionando sobre los tapones guardapolvo hasta que

asegure en su lugar.

3. Veriﬁque que el módulo transceptor está asegurado en su lugar intentando sacarlo del zócalo del módulo sin soltar el pestillo. Si permanece

en su lugar, está correctamente asentado. Si no, tendrá que volver a introducirlo, presionando ﬁrmemente los tapones guardapolvo hasta que

asegure en su lugar.

4. Una vez haya veriﬁcado que el módulo del transceptor está asegurado en su lugar, puede retirar los tapones guardapolvo de los oriﬁcios

ópticos LC y conectar su cableado.

Nota: Guarde los tapones guardapolvo para que pueden ser utilizados en caso de que el módulo transceptor necesite ser desinstalado y reinstalado.

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Nicht kategorisiert
Modell:	N286-10GSR-MDLC
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Verpackungsbreite:	114 mm
Verpackungstiefe:	45 mm
Verpackungshöhe:	21.6 mm
Paketgewicht:	30 g
Warentarifnummer (HS):	85369010
Ursprungsland:	China
Maximale Datenübertragungsrate:	10000 Mbit/s
Anzahl Produkte pro Versandkarton:	10 Stück(e)
Gewicht Versandkarton:	430 g
Länge des Versandkartons:	130 mm
Breite des Versandkartons:	230.1 mm
Höhe des Versandkartons:	59.9 mm
Schnittstelle:	SFP+
Nachhaltigkeitszertifikate:	RoHS
SFP Transceiver-Typ:	Faseroptik
Maximal mögliche Übertragungsstrecke:	300 m
Wellenlänge:	850 nm
Hauptkarton GTIN (EAN/UPC):	10037332185492
Optischer Kabelverbinder:	LC
SFP-Transceiver-Standard:	SR
Duplex-System:	Voll