Tripp Lite LR604 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite LR604 (32 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/32
Important Safety Instructions 2
Quick Installation 3
Basic Operation 4
Service 5
Specifications 5
2-Year Limited Warranty 6
Español 7
Français 13
Deutsch 19
Русский 25
Owner’s Manual
Line Conditioners
(220/240V-50/60Hz)
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
18-12-183-931350.indb 1 12/20/2018 5:04:56 PM
2
Important Safety Instructions
Line Conditioner Location Warnings
Install your Line Conditioner indoors, away from excess moisture or heat, dust or
direct sunlight.
For best performance, keep the indoor temperature between C and 40° C
(between 32° F and 104° F).
Leave adequate space around all sides of the Line Conditioner for proper ventilation.
Line Conditioner Connection Warnings
Connect your Line Conditioner to a three-wire, grounded AC power outlet. Do not
remove or modify the ground pin of the Line Conditioner’s plug.
Do not use two-prong adapters with the Line Conditioner’s plug. Do not plug your Line
Conditioner into itself; this will damage the Line Conditioner and void your warranty.
If you are connecting your Line Conditioner to a motor-powered AC generator, the
generator must provide clean, filtered computer-grade output.
Use care when connecting country-specific plugs to selected 220/240V, 50/60Hz Line
Conditioners. Hot 1 and Hot 2 may be reversed. When using a French CEE7/7 plug,
always use the separate grounding pin supplied with the unit. When using a Schuko
CEE7/4 plug, an ungrounded condition will exist unless separate grounding to the rear
of the Line Conditioner is provided by the user.
Equipment Connection Warning
Do not use Line Conditioners for life support applications in which a malfunction or
failure of a Line Conditioner could cause failure or significantly alter the
performance of a life-support device.
Line Conditioner Maintenance Warning
Line Conditioners require no maintenance. Keep the Line Conditioner dry at all
times. DO NOT open the unit for any reason.
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during
the installation, operation and storage of all Tripp Lite Line Conditioners.
18-12-183-931350.indb 2 12/20/2018 5:04:56 PM
3
Connect your equipment to the
Line Conditioner, and the Line
Conditioner to an electrical
outlet.
Using the power cord from your equipment,
connect your equipment to the Line
Conditioner (See A).
Using the supplied power cord, plug cord
into the Line Conditioner’s input (rear) and
then into a wall outlet (See B). If needed,
use the supplied Schuko adapter when
connecting to the wall outlet.
Connect additional equipment
to the Line Conditioner in the
same manner.
Additional cords and receptacle adapters
are available at www.tripplite.com to
accommodate most outlet configurations.
Turn on your Line Conditioner’s
power switch
Note: Source Voltage Matching Switch—Set
the Source Voltage Matching Switch to either
208, 220 or 240 volts to match the input
voltage being used (select models).
Quick Installation—220/240V - 50/60Hz
1
2
3
A
B
18-12-183-931350.indb 3 12/20/2018 5:04:56 PM


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: LR604

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite LR604 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-